• 한국초등수학교육학회지
• /
• 제24권1호
• /
• pp.109-128
• /
• 2020

우리나라는 교육의 핵심을 공교육인 학교 교육에 두고 있으며 교육부가 고시한 교육과정을 토대로 교과서가 편찬되고 있다. 따라서 질 높은 교과서의 편찬은 매우 중요하며 교육과정을 개정하는 일 이상의 정성과 노력이 요구된다. 우리나라도 그 동안 여러 차례 교과서 개발에 힘써왔으나 선진 외국 교과서와 비교해 볼 때 외적 체제나 편집 디자인 면에서 획일적인 교과서라는 평가를 받아왔다. 이는 교과서를 편찬할 때 교과서에서 다루어야 하는 내용인 교과서의 내적 체제에만 편중된 결과의 산물이라 할 수 있다. 이에 본 연구에서는 교과서 역사상 괄목할만한 변화가 있었던 7차 교과서에서부터 2015 현행 교과서에 이르기까지의 우리나라 국정 교과서를 차수별로 살펴보고, 어떠한 변화의 양상을 보이는가에 대해 의미있는 고찰을 하고자 한다. 이를 위해 교과서의 구성 체제를 외적 체제와 내적 체제로 나누어 분석한다. 교과서의 외적 체제는 판형, 자형, 지질, 색상의 변화와 삽화 분량의 변화를 중심으로 살펴보고, 내적 체제는 단원의 구성 체제와 차시의 구성 체제의 변화 및 발문 방식의 변화를 중심으로 살펴봄으로써 교과서의 변화 양상에 대한 유의미한 결론을 도출하였다.

• 대한원격탐사학회지
• /
• 제33권6_1호
• /
• pp.961-970
• /
• 2017

위성을 이용한 에어로졸 원격탐사에서 높은 공간해상도의 정보에 대한 요구가 많았음에도 그동안 단일화소가 갖는 물리적인 에어로졸 신호의 약화와 구름 등에 의한 오차 증가로 인해 산출에 어려움을 겪어왔다. 본 연구에서는 GOCI 자료를 이용하여 한-미 협력 국내 대기질 공동조사 캠페인 기간인 2016년 5, 6월에 대해 GOCI의 최대 공간 해상도인 500 m에서 고해상도 에어로졸 광학 깊이를 산출하였다. 기존의 GOCI 알고리즘은 6 km 해상도로 에어로졸 산출물을 제공해왔으며, 이번 연구에서 개발한 고해상도 산출 알고리즘은 기존 알고리즘을 기반으로 한다. 에어로졸 모형, 조견표 구성 및 역추산 과정은 동일하게 이용되었으나, 높은 해상도에서의 구름 제거 방법이 개선되었다. 그 결과, 몇 가지 사례에 대하여 6 km 산출물과 비교하였을 때 500 m 산출물의 분포 및 크기는 유사하게 나타났으나 공간 해상도가 높기 때문에 더 많은 화소에 대하여 산출되었다. 이에 따라 작은 규모의 구름 주위에서도 산출이 되었고, 에어로졸의 공간적인 변화를 세밀하게 살펴볼 수 있었다. 정확도 검증을 위하여 지상 관측 장비와 비교를 하였을 때 공간해상도가 크게 좋아졌음에도 상관 계수가 0.76, 기대 오차 내에 들어오는 비율이 51.1%로 6 km 산출물과 유사한 검증 결과를 보였다.

• 한국가정과학회지
• /
• 제3권2호
• /
• pp.77-89
• /
• 2000

In this study, to activate the industrialization and to improve the quality of Toha-jeot by shortening the fermentation period, we investigated the changes in the nutritional components of Toha-jeot. salt-fermented Toha shrimp( Caridina denticulata denticulata $D_{E}$ $H_{AAN}$) which was salted with a low-salt group and high-salt group during fermentation. In this experiment. there are four groups of Toha-jeot which were manufactured with 15% ratio of common salt: the first group containing 2% wheat bran (w2%-L). the second high-salt group containing 2% wheat bran( w2%-H) , the third low-salt group containing 4% wheat bran (w4%-L) and the last high-salt group containing 4% wheat bran(w4%-H). These four groups were refrigerated at 4${\pm}$1$^{\circ}C$ and then taken out for analysis at three month intervals during 9 month. Among the free amino acid contents in Toha-jeot, 22 kinds were detected. 6 month after the fermentation when the quantity of the amino acid contents in Toha-jeot is highest, ornitine, glutamic acid, leucine. alanine. lysine and valine occupy the majority, in the order of abundance. In cases of nucleotides. 6 month after the fermentation. from the groups w2%-L, w2%-H and w4%-L, inosine and IMP were not detected. and hypoxanthine, AMP, ADP were detected but 9 month after the fermentation ADP was not detected. The main constituents of fatty acid were as follows : (a) from w2%-L, w2%-H, 6 month after the fermentation. $C16:0$, $C12:0$, $C18:1$, $C18:3$, and $C16:1$. (b) from w4%-L. 6 month after the fermentation, $C18:3$, $C16:0$, $C12:0$ and $C18:1$. (c) from W4%-H, $C16:0$, $C12:0$, $C18:3$ and $C18:1$. In case of mineral contents. Na, Ca. K. Mg, Fe. Zn, Mn and Cu were detected according to the magnitude of the quantity. From the group w4%-H, high quantity of Na was detected during the total fermentation period. In case of color value, from the groups w2%. the values of L. a. b were highest after 6 month fermentation and were decreased after 9 month fermentation, while from groups w4%, the values of L, a, b were gradually decreased after 3 month fermentation.ion.

• 한국작물학회지
• /
• 제22권2호
• /
• pp.121-127
• /
• 1977

본 시험은 수도본답에 널리 사용되고 있는 제초제Nitrofen (TOK) 입제가 포장ㆍ운송ㆍ보관ㆍ분배 등의 유통과정을 거쳐 실제로 사용될 때의 입도조성을 조사하고 수도에서 Nitrofen특유의 갈변약반형성이 본제품의 입도, 시용방법, 제형, 수심, 수도재배양식에 따라 어떻게 달라지는 가를 알고저 수행되었으며 그 결과는 다음과 같다. 1. 시판중인 3kg들이 Nitrofen입제는 중량기준으로 98.91%가 9∼35mesh범위의 입자들이었고 100mesh 보다 작은 미분말함유율은 0.08%에 불과하였다. 2. Nitrofen의 처리에 의하여 수도체에 나타나는 갈변약반은 제형, 시용방법, 입도, 수심을 달리하여도 모두 지표면에서부터 5∼7cm 높이의 도체부위에 나타났으므로 미립말이 수면에 부유하다가 도체에 부착되어 약반형성에 직접적으로 관여한다고는 할 수 없었다. 3. 100mesh보다 미분말인 경우 3mesh이상의 큰 입자들에 비하여 이앙도에 대해 약반형성위치 및 약반의 크기를 증가시키지 않았으나 개체당 약반수는 증가시켰다. 4. 입제의 수면철포, 입제의 토양표층혼화시용후 관개, 수화제의 토양표면시용 후 관개등의 모든 경우에 약반형성위치, 약반의 크기 및 약반발현엽수에 있어서 차이가 없었다. 5. 100mesh이하의 미분말을 시용할 경우 이앙도는 약반형성이 뚜렷이 많았으나, 3cm수심으로 천수관개하면 약반형성이 현저히 감소되었고, 식상이 없는 직파도는 이앙도에 배해 약반형성이 현저히 적었다.

• 지구물리와물리탐사
• /
• 제13권3호
• /
• pp.268-276
• /
• 2010

지진재해대책법이 2009년 3월에 발효됨에 따라 가속도 지진관측을 수행하여야 할 기관이 대폭 확대되었다. 소방방재청의 추정에 의하면 최소 400개소의 자유장 가속도 관측소가 설치될 예정이다. 지진계측기의 성능 향상과 통신 기술의 발달로 지진관측소 설치가 보편화되면서 지진관측의 주 기능이 신속 피해 예측과 경보 발령 등 지진방재에 적극적으로 활용할 수 있도록 전환되고 있다. 신속 지진피해 예측의 기반기술인 실시간 지진동 영상화기법을 소개하였다. 이 기술은 신속한 지진피해 평가를 위한 실시간 자료 취합뿐 아니라 시각적으로 정보를 파악할 수 있도록 개발되어 활용되고 있다. 한편 지진피해는 주로 S 파와 연속되는 표면파에 의해 발생한다. 최초로 도달하는 P 파로부터 최대 지반운동 크기와 지진 피해를 예측하여 경보를 발령하는 것이 지진조기경보체계이다. 지진조기경보의 기술개발 현황과 함께 2007년 오대산지진에 적용한 예를 소개하였다. 조기경보 기술은 기상청의 지진통보 체계를 획기적으로 개선시킬 수 있다. 또한 지역별로 분산된 주요 국가 시설물의 지진방재를 위해 활용할 수 있는 분산형 조기경보 시스템의 구성과 활용방안을 제안하였다.

• 자원환경지질
• /
• 제18권4호
• /
• pp.343-355
• /
• 1985

본 논문에서는 세계적으로 유명한 대규모의 황화철상(黃化鐵床)에서 산출되는 7종의 이방성(異方性) 광석광물(鑛石鑛物)을 대상으로 물리적(物理的) 특성(特性)을 실험 연구하고, 광물(鑛物) 고유의 타광학성(他光學性), 결정방향(結晶方向)과의 상관 관계를 밝히며, 금속자원 광물의 감정(鑑定)을 위한 자료를 제시하고자 시도되었다. 연구대상 이방성(異方性) 광물(鑛物)(covellite, graphite)은 광물상호간의 white light color의 차이 뿐아니라 동종광물(同種鑛物)내부의 두 편광(偏光)(상광선(常光線), 이상광선(異常光線))의 방향에 따라 동일한 형태이나 큰 정량적 차이(R=약 10%)를 보여주는 spectral profile을 갖는다. 결정방향(結晶方向)에 따라 고찰된 이방성(異方性) 광물(鑛物)(enargite, famatinite)의 반사력(反射力)은 벽개면에 평행한 면에서 항상 높은 값(R=약 5%)을 갖는다. 측정 반사력(反射力)을 이용하여 규명된 연구 광물종의 광학적(光學的) 대칭성(對稱性)은 covellite가 일륜성(一輪性)(+), graphite는 일축성(一軸性)(-)이고, enargite와 famatinite는 이축성(二軸性)(+)이며, 부반사력(復反射力)이 낮은 gratonite의 경우는 결정이 불가능하였다. 표준하중별로 실시된 휘경도(徽硬度)실험에서 이방성광물(異方性鑛物)(enargite, famatinite)의 결정방향은 큰 영향을 미치는데, 즉 벽개면에 평행한 면에서 항상 높은 (HV=> $200kg/mm^2$) 휘경도(徽硬度)값을 보여준다. 모든 실험광물이 각각 특징적인 indentation의 형태를 갖음은 징경도(徵硬度)와 함께 광물감정(鑛物鑑定)에 유용할 것이다. 실험광물이 최소하중에서 항상 불규칙한 휘경도(徽硬度)값을 갖는 것은 관찰에서 기인되는 측정오차로 사료된다. 휘경도(徽硬度)-반사력(反射力)의 상관 관계를 이용한 시험광물의 분류는 Gray-Millman(1962)의 실험결과와 일치된다. 한편 반사도(反射度)의 과장별 측정오차와 그의 제거 방안이 논의되었다.

• 한국가금학회지
• /
• 제43권4호
• /
• pp.229-233
• /
• 2016

본 실험은 국내 외에서 시판 중인 계란검사장비 3종인 레이저형, 탕침형 그리고 초음파형의 성능을 평가하고자 실시하였다. 실험에 사용한 신선란은 단일 계군에서 산란한 특란을 선발하여 사용하였다. 실험 1에서는 동일한 계란을 순차적으로 3종의 장비를 이용하여 분석하였다. 실험 2에서는 동일한 계란을 순차적으로 2종의 장비를 이용하여 분석하였으며, 실험 3에서는 동일한 계군에서 산란한 계란 200씩을 각각의 할란검사장비를 이용하여 난질을 분석하였다. 분석항목으로는 난중, 농후난백높이, 호우유닛 그리고 난황색을 측정하였다. 실험 1과 2에서는 장비에 따른 난중의 차이는 발견되지 않았지만, 농후난백 높이와 호우유닛의 수치가 초음파형에서 가장 높았으며, 그 다음으로 탕침형, 레이저형순으로 조사되었다. 동일한 계군에서 산란한 계란을 각각 할란검사장비를 이용하여 분석한 결과, 난중에서는 차이가 없었지만, 초음파형에서 가장 높은 난백고와 호우유닛을 나타내었다. 하지만 난황색은 레이저형에서 가장 높은 결과를 나타내었다. 결론적으로 신선란을 대상으로 조사한 할란검사장비의 난질평가 결과는 장비에 따른 차이가 있는 것으로 조사되었다. 비록 장비간의 상관계수는 높게 계산되었지만, 동일 계란에 따른 호우유닛 결과는 장비에 따른 편의(bias)와 넓은 신뢰한계를 나타내었다. 이러한 결과는 호우유닛이 높은 신선란을 대상으로 품질을 평가한다면 어떤 장비를 사용하더라도 계란의 품질 등급에는 차이가 없겠지만, 일정기간 저장되어 호우유닛이 떨어진 계란을 대상으로 품질을 평가한다면 장비에 따라서 계란 등급에 차이가 날 수 있는 것을 의미한다. 하지만 본 연구에서는 동일한 계란을 할란 후 순차적으로 측정하여, 난황과 난백 시료 이동에 따른 기계적인 오차를 고려할 수 없기 때문에 향후 이러한 방법을 보완하여 할란검사장비의 성능을 평가할 수 있는 기법의 개발이 필요하겠다.

• 천문학논총
• /
• 제36권3호
• /
• pp.47-63
• /
• 2021

와이즈/네오와이즈 자료를 사용하여 1형 활동은하핵의 근적외선 장기 변광 특성을 살펴보았다. 활동은하핵은 밀리퀘이사 목록을 사용해 가시광에서의 등급 제한을 두어 선정하였고, 여러 번의 다중시점 측광 자료를 확보하기 위해 황도북극과 황도남극에 가까운 대상으로 한정하였다. 이후 와이즈와 네오와이즈 데이터베이스에서 해당 대상들의 측광 자료를 추출하였다. 일부 근적외선에서 검출되지 않은 경우와 관측 횟수가 지나치게 적은 경우를 제외하고 총 73개의 1형 퀘이사 및 활동은 하핵, 140개의 측광학적으로 선택된 활동은하핵 후보에 대해 W1 (3.4 ㎛), W2 (4.6 ㎛) 밴드 광도곡선을 구성하고 이를 이용해 변광 분석을 수행하였다. 변광 여부를 판단하기 위해 초과 분산 값과 변광의 유의확률 P_var를 계산하였다. 초과 분산이 포아송 오차에 의해 추정되는 오차값보다 큰 경우, 그리고 P_var이 0.95보다 크거나 같은 경우를 변광으로 판단했는데, 활동은하핵 73개 중 19개, 활동은하핵 후보 140개 중 12개가 W1, W2 밴드 모두에서 변광 대상으로 판단되었다. W1 밴드보다 W2 밴드에서 변광 대상으로 판단되는 숫자가 작게 나타났는데, 이는 긴 파장으로 갈수록 변광의 정도가 작아짐을 시사하는 것으로 보인다. 약 9 ~ 26%의 대상들이 근적외선 변광을 보였다. 감쇠 랜덤워크 모형을 사용하여 변광 폭(σ)과 완화 시간(τ), W1과 W2 밴드 사이의 시간 지연 등을 추정하였다. 변광 폭 및 완화시간은 W1 등급과 큰 상관관계를 보이지 않았으며, 두 변수 사이에도 특별히 두드러지는 상관관계가 나타나지 않았다. 단, 감쇠 랜덤워크 모형을 사용해서 시간 규모를 추정할 때 광도곡선의 분량이 충분한지를 감안하면, 완화시간이 짧은 대상들에 대해서는 변광 폭과 완화시간이 음의 상관관계를 보인다고도 볼 수 있다. 대상의 개수가 통계적으로 유의미한 결과를 제시하기에는 부족하다. X선 광도와 변광 특성을 비교했을 때에는 상관관계를 찾아보기 어려웠으나, 앞으로 얻어질 X선 탐사자료와 전천 스펙트럼 탐사자료와 결합한 추가 연구가 기대된다. 전체 대상 중에서는 시간에 따라 (W1-W2) 색이 변하는 것으로 판단되는 흥미로운 대상이 4개가 존재했는데, 이들의 특성에 대해서는 추후 연구가 더 필요할 것으로 전망한다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.