• Journal of Broadcast Engineering
• /
• v.17 no.2
• /
• pp.305-315
• /
• 2012

Color correction between two or multiple images is very crucial for the development of subsequent algorithms and stereoscopic 3D camera system. Even though various color correction methods are proposed recently, there are few methods for measuring the performance of these methods. In addition, when two images have view variation by camera positions, previous methods for the performance measurement may not be appropriate. In this paper, we propose a method of measuring color difference between corresponding images for color correction. This method finds matching points that have the same colors between two scenes to consider the view variation by correspondence searches. Then, we calculate statistics from neighbor regions of these matching points to measure color difference. From this approach, we can consider misalignment of corresponding points contrary to conventional geometric transformation by a single homography. To handle the case that matching points cannot cover the whole regions, we calculate statistics of color difference from the whole image regions. Finally, the color difference is computed by the weighted summation between correspondence based and the whole region based approaches. This weight is determined by calculating the ratio of occupying regions by correspondence based color comparison.

• Journal of Fashion Business
• /
• v.16 no.2
• /
• pp.138-150
• /
• 2012

Nano Inkjet DTP technology, a new technology introduced recently, can be applied to various types of fabric, and pre-treatment process can be omitted, which makes the whole printing process compact. Some important factors for DTP are color difference between the color selected by the designer on PC and the color on the final product and durability of the final fabrics. In this study, the twenty-three trend colors of 2012-2013 F/W suggested by PeclersParis have been picked to be printed on cotton, silk and polyester fabrics, then K/S and ${\Delta}E$ value and color fastness were measured. The results show that dyeability of fabric is varied for each color group, and that also tone of color affect to dyeability when measured for colors in the same group. In general, for all fabric, light fastness, washing fastness and color fastness to sublimation are outstanding. However, because of poor rubbing fastness, additional treatment to fix colorant on fabric is required.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.5
• /
• pp.160-167
• /
• 2014

This paper presents a spliced color image detection method using Benford' Law and color difference. For a suspicious image, after color conversion, the discrete wavelet transform and the discrete cosine transform are performed. We extract the difference between the ideal Benford distribution and the empirical Benford distribution of the suspicious image as features. The difference between Benford distributions for each color component were also used as features. Our method shows superior splicing detection performance using only 13 features. After training the extracted feature vector using SVM classifier, we determine whether the presence of the image splicing forgery. Experimental results show that the proposed method outperforms the existing methods with smaller number of features in terms of splicing detection accuracy.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.2
• /
• pp.96-103
• /
• 2015

Purpose: The purpose of this study was to spectrophotometrically evaluate the influence of porcelain layer thickness and substructure. Materials and Methods: Four groups of porcelain specimens (metal and ceramic substructure) was prepared for analysis. Color parameters were measured with spectrophotometer and color difference (${\Delta}E*$) were calculated. T-test and one-way ANOVA test were used to find out significant difference and Tukey test was used to identify where the difference ware. Results: Increasing the thickness of porcelain decreased values (P < 0.05). Increasing the thickness of porcelain on ceramic substructure decreased the $a^*$ (P < 0.05) but, the $b^*$ were not statistically different. Total color difference (${\Delta}E*$) were below 1 when the difference of porcelain thickness were 0.5 mm. Conclusion: The thickness of porcelain are the factor effecting on color. This study will help the color are controlled by changing the thickness of porcelain clinically.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.4 no.1
• /
• pp.73-84
• /
• 2002

The purpose of this study was to investigate the natural dyeability on extract of Aloe Vera princeps. The experimental items were divided into the mordanting method, component of fabric, extracting portion, and kind of mordants. The experimental study was done to by laundering, abrasion(dry/wet), perspiration(acid/alkali), light fastness test and color difference by C.C.M system. The summerized finding resulted from experiments and investigation are suggested as follows: First, in the C.C.M test on mordanting method, color difference was significantly improved when mordants were treatmented. And the premordanting method showed the highest color difference. Second, in the C.C.M test on component of fabric, color difference of silk was higher than cotton. It was considered that silk has -$\NH_2$, -COOH, -OH more than cotton. Third, in the C.C.M Test on extracting portion, color difference of extracting in skin of Aloe leaf was three times higher than that of inside lump. Forth, in dyeing-fastness on mordants, laundering fastness showed 3 ~ 4 grade nearly. In perspiration-fastness(acid/alkali), Al(4~5/4~5) was the highest. In abrasion-fastness(dry/wet), cotton(4~5/4~5) was higher than silk (4~5/4) in all mordants. In light-fastness, silk(2~5) was higher than cotton(1~2) generally and especially Cu mordant of silk(4~5) was the highest. Sixth, in color difference analysis on 7 mordants Cu(29.9), Fe(28.7) and Cr(28.9) showed the highest in silk. And Cu(12.7), Fe(10.42) and Sn(10.43) showed the highest in cotton and Al(23.6, 8.0) showed the lowest in silk and cotton.

• Korean Journal of Rural Living Science
• /
• v.8 no.2
• /
• pp.83-91
• /
• 1997

In this study, the dyeability of natural dye extracted from chesnut shell was investigated in order to explore the using of discarded chesnut shell in natural dyeing. Dyeing experiments were done in various dyeing conditions which were different in dyeing temperature, concentration of dyebath, dyeing time, repitition of dyeing. pH of dyebath and mordant with 3 kinds of experimental fabrics silk, nylon and cotton. Color and color difference ($\Delta$ E) of every dyed fabrics were measured and color fastness to drycleaning, washing, perspiration and light were measured. The results were as follows ; 1. The dyebath became thicker with time and temperature of extraction and the characteristics of dyebath prepared chesnut shell 1g : distilled water 30㏄ after 3 hrs-boiling were 32,400ppm and 3.7pH. 2. The dyeabilities of silk and nylon fabrics were good and color difference was increased with dyeing temperature, concentration of dyebath, dyeing time, number of repitition and acidity of dyebath. But the dyeability of cotton was very poor compared to silk and nylon. 3. Without the treatment of mordant, the dyeability of silk was little lower than that of nylon, but after the treatment of mordants it became higher than nylon. After the treatment of mordant Cu and Fe, the dyeability of cotton was increased although the natural dye from the chesnut shell was hardly absorved in cotton without mordant. 4. On the whole, the colorfastness of dyed silk and nylon were very good except the colorfastness to washing in silk and the colorfastness to light in nylon.

• Journal of the Korean Home Economics Association
• /
• v.43 no.5 s.207
• /
• pp.107-115
• /
• 2005

The purpose of this research was to compare the harmony of tone on tone coloration according to transformation of color area-ratio in traditional Korean dress. The respondents were asked to evaluate 36 stimuli of the traditional Korean skirt and jacket with different color tone. The subjects were 83 female undergraduate students. The results are as follows. For red colors, combinations of vivid/dull, vivid/dark, and light/dark made a difference in the harmony of coloration according to the transformation of color area-ratio. For yellow colors, combinations of vivid/dark, light/dull, and light/dark made a difference in the harmony of coloration according to the transformation of color area-ratio. For green colors, combinations of vivid/dull, vivid/dark, light/dull, and light/dark made a difference in the harmony of coloration according to the transformation of color area-ratio.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.1
• /
• pp.139-144
• /
• 2001

In order to analyze of the color perception Farnsworth Test Panel D-15 in the CIELab color space coordinates, it was measured by the reflectance spectrum of the 380~780nm wavelength regions. The Test Panel D-15 was situated in the near origin point of higher the saturation in CIELab coordinates (a, b). Normal person perceived to the similar color for the color of small color difference, and color deficiency person depended on the confusing color line and the neutral point unconcerned with the color difference. In case of Ptotanopia, Deutrnopia, r-g defect, y-b defect with the color deficiency, the neutral points position (a,b) were each (2.12,1.02), (4.25,2.05), (2.51,0.25), (1.20,-1.10).

• Journal of Korean Dental Science
• /
• v.8 no.2
• /
• pp.49-56
• /
• 2015

Purpose: The effect of accelerated aging on color stability of various dual-cured self-adhesive resin cements were evaluated in this study. Materials and Methods: Color stability was examined using three different brands of dual-cured self-adhesive resin cements: G-CEM LinkAce (GC America), MaxCem Elite (Kerr), and PermaCem 2.0 (DMG) with the equivalent color shade. Each resin cement was filled with Teflon mold which has 6 mm diameter and 2 mm thickness. Each specimen was light cured for 20 seconds using light emitting diode (LED) light curing unit. In order to evaluate the effect of accelerated aging on color stability, color parameters (Commission Internationale de l'Eclairage, CIE $L^*$, $a^*$, $b^*$) and color differences (${\Delta}E^*$) were measured at three times: immediately, after 24 hours, and after thermocycling. The $L^*$, $a^*$, $b^*$ values were analyzed using Friedman test and ${\Delta}E^*$ values on the effect of 24 hours and accelerated aging were analyzed using t-test. These values were compared with the limit value of color difference (${\Delta}E^*=3.7$) for dental restoration. One-way ANOVA and Scheff's test (P<0.05) were performed to analyze each ${\Delta}E^*$ values between cements at each test period. Result: There was statistically significant difference in comparison of color specification ($L^*$, $a^*$, $b^*$) values after accelerated aging except $L^*$ value of G-CEM LinkAce (P<0.05). After 24 hours, color difference (${\Delta}E^*$) values were ranged from 2.47 to 3.48 and $L^*$ values decreased and $b^*$ values increased in all types of cement and MaxCem Elite had high color stability (P<0.05). After thermocycling, color change's tendency of cement was varied and color difference (${\Delta}E^*$) values were ranged from 0.82 to 2.87 and G-CEM LinkAce had high color stability (P<0.05). Conclusion: Color stability of dual-cured self-adhesive resin cements after accelerated aging was evaluated and statistically significant color changes occurred within clinically acceptable range.

• Journal of the Korea Furniture Society
• /
• v.22 no.3
• /
• pp.239-243
• /
• 2011

In this study, the coating properties and surface performance of exotic cherry wood (Prunus serotina) were estimated, reviewing color difference, hardness and abrasion resistibility in order to evaluate probability as construction interior members such as wall and floor. The reduction effect of color difference was represented in the order of water soluble color stain, water soluble transparent stain, and non-coated lumber. However, the tendency of distinct difference according to wood grain pattern was not found. The wavy grain lumber showed better properties in hardness and resistance to abrasion than quarter grain. In conclusion, it was supposed that the application of wavy grain lumber in wall and floor as interior materials would be acceptable in practicality.