• 한국전기전자재료학회논문지
• /
• 제36권5호
• /
• pp.494-499
• /
• 2023

In this paper, in order to apply the CF (color filter) type of the micro light emitting device (Micro LED) display method, a study on the manufacturing process of red and green phosphor inks for the inkjet process was conducted. The blue light-emitting KSF and LuAG phosphors were respectively used to control the phosphor particle size to about 1㎛, and a phosphor ink was prepared by synthesizing with a low-viscosity solution (IPA/Eg). A chemical dispersion method was applied to selectively control the dispersion characteristics in the manufacture of phosphor inks, and in particular, phosphor inks with a dispersant applied a dispersant secured stable dispersion characteristic compared to phosphor inks without a dispersion process. Therefore, it seems possible to manufacture CF for Micro LED through an inkjet process capable of controlling the dispersion characteristics of phosphor ink.

• 한국의류산업학회지
• /
• 제19권5호
• /
• pp.653-660
• /
• 2017

Recently, consumers' evaluation and purchase of online design has been increasing due to the popularization of designing through personal computers, but there has not been enough studies on consumers' brain wave responses depending on the change of PC monitor's color. Therefore, this study investigated how brain waves changed when different background colors with gray patterns were presented through PC monitors. Six background colors with same tone of slightly low saturation were selected, including ivory, yellow, pink, green, blue and pure white as a base color. The brightness and characteristics of color used were analyzed using the luminance meter and color scales. Brain wave was measured by EEG measurement equipment. Brain wave measurement was carried out with 9 subjects at 6 points: F3, F4, T3, T4, O1, and O2. Stimuli were shown for 15 seconds each and black screens were displayed for 15 seconds between each stimulus. As results, the brain waves at O1 responded sensitively by different background colors, followed by F4 and T4. Brain index such as 'RT', 'RA', 'RG', 'RSA', and 'RAHB' showed significant differences depending on the background color at O1, whereas 'RST' differed at F4. Yellow and blue backgrounds pair was the only stimuli that showed significant differences in six brain indices mentioned. Yellow background had higher value of 'RG' at O1 and higher 'RST' at F4, indicating yellow background enhanced concentration. Blue background activated 'RT', 'RA', 'RSA', 'RAHB' at O1, meaning blue background induced calm and stable state.

• 상하수도학회지
• /
• 제11권4호
• /
• pp.110-117
• /
• 1997

Performances of combined adsorption and coagulation were evaluated as one of the options for pre-treatment or post-treatment of MSW landfills leachate and industrial landfill leachate. The COD and color removals of leachate from an old MSW landfill were 35% and 33% at an alum dose of 300mg/L with preceding PAC(powdered activated carbon) dose of 200mg/L, respectively. The COD and color removals of leachate from an young MSW landfill were 58% and 25% at an alum dose of 700mg/L and PAC dose of 500mg/L, respectively. The COD and color of biologically treated leachate from an industrial waste landfill were removed up to 32% and 68%, respectively, with pH control at addition of 500mgAlum/L and 1,000mgPAC/L. Adsorption and coagulation process with pH control showed better COD and color removals than the process without pH control for biologically treated leachate from an industrial waste landfill. The color removal was influenced greatly by pH control, while COD removal was not significant. No difference in removal efficiency was observed between adsorption-coagulation and coagulation-adsorption process. The COD removal was accomplished mainly by adsorption, while coagulation was a key mechanism of color removal. However, the mechanism of COD removal was obscure, when BOD/COD ratio was high. Maximum net increases in COD and color removals by the adsorption-coagulation process were respectively 45% and 46% compared with the unit process of adsorption or coagulation, although those removals depended on leachate characteristics. Thus, adsorption-coagulation process was considered to be effective for pre- and post-treatment of landfill leachate, and has distinct features of simple, flexible, stable and reliable operation against fluctuation leachate quality and flowrate.

• 한국건축시공학회지
• /
• 제15권6호
• /
• pp.607-614
• /
• 2015

일반적으로 건축물의 마감은 기본적인 발수성을 가진 수성페인트 마감으로 이루어진다. 이는 건축물 외벽에 작업시 적용하기 쉬우며, 건축물 유지 또한 쉬워 많은 장점을 가지고 있다. 하지만 자외선으로 인해 변색 또는 열화 되기 쉬워 그 효과는 기대에 미치지 못하고 있다. 따라서 본 연구는 외부 표면마감 재료로서 발수제를 직접 혼입한 수성페인트의 색 변화를 통한 내구성능을 분석하여 실제 현장에 적용하기 위한 실용성을 평가하고자 하였다. 촉진 시간에 따른 색 변화 및 색차를 측정하였으며, 적용가능성은 실험결과를 토대로 평가하였다. 색차, 명도 및 색도의 변화량을 실험결과에 따라 종합적으로 고려해 볼 때 본 연구에서 제안한 발수제를 혼입한 수성페인트 마감공법(혼입율 2, 5, 8%)은 충분히 사용 가능할 것으로 사료된다. 이는 건축물의 외부 표면을 수성페인트로 칠한 후 추가로 발수제를 도포하는 등의 기존 표면 마감방법에 비해 공사내용이 간편하며 시공성도 양호하여 폭넓은 활용이 기대된다. 또한 실제 현장에서는 원하는 색상으로 필요한 양만큼 제조하여 사용할 수 있으며, 전문 인력이 필요하지 않아 손쉽게 활용 가능할 것으로 기대된다.

• 한국식품저장유통학회지
• /
• 제9권3호
• /
• pp.327-331
• /
• 2002

식품부산물인 포도과피에 함유된 수용성 색소인 anthocyanin을 새로운 천연식용색소로 개발하고자 pH, 당, 유기산 및 빛 등의 영향에 대한 색소안정성을 조사하였다. 포도과피의 anthocyanin 색소는 pH가 낮을수록 색깔의 강도가 높고 안정하였으며 pH가 증가함에 따라 최대흡수파장이 장파장 쪽으로 이동하는 bathochromic shift현상을 나타내었으며 저장기간에 따른 영향은 pH가 낮을수록 안정하였고 pH 가 증가할수록 색소파괴가 많아지는 경향이었다. 당류처리에 따라서는 glucose, mannose 처리구가 무처리 및 다른 당류처리구보다 색소안정화에 기여하였으며, 첨가농도별 영향은 0.3M에서 가장 우수하였다. 유기산 첨가에 따른 영향은 citric acid가 ascorbic acid보다 저장안정성이 월등히 우수하여 anthocyanin색소 첨가제로 유용함을 알 수 있었다. 빛에 대한 anthocyanin색소의 안정성은 암소에서 저장하는 것이 일광에 노출된 경우 보다 안정하여 anthocyanin첨가 식품의 포장시 빛을 차단함으로써 색소안정성을 증진시킬 수 있을 것으로 판단되었다.

• 한국컴퓨터정보학회논문지
• /
• 제15권3호
• /
• pp.27-35
• /
• 2010

정확하게 피부 색상을 검출하는 방법은 얼굴 인식 및 추적, 표정 인식, 성인 영상 검출, 헬스케어 등의 다양한 분야에서 매우 유용하게 사용된다. 본 논문에서는 일반광과 실내 조명이 더해진 환경에서 피사체의 거리를 변경하면서, 그리고피사체배경의색상을변경함에따라다양한피부색상검출알고리즘의성능을비교평가한다. 실험대상은 피부톤의 차이를 보이는 남자 2명과 여자 한 명이고, 배경을 화이트, 블랙, 오렌지, 핑크, 옐로우의 5가지 색으로 구분하여 테스트를 하였다. 성능 평가에 사용한 피부색상 추출 알고리즘은 Peer 알고리즘, NNYUV, NNHSV, LutYUV, Kismet 알고리즘이며, 카메라와 피사체 사이의 거리는 60cm에서 120cm 사이로 한정하여 실험을 하였다. 성능 측정 실험 결과 피사체의 배경 변화에 따른 알고리즘이 성능의 차이를 보이는데, 전반적으로 뉴럴 네트워크를 이용한 NNHSV, NNYUV, 그리고 LutYUV이 안정적인 결과를 보여주었으며, 나머지 알고리즘들은 배경의 변화에 따라 피부색상 검출율이 영향을 많이 받았다. 본 논문에서 보여준 다양한 성능 평가 결과들은 피사체의 주변 환경이 동적으로 변화하는 실제 환경에서 상황에 따라 적응적이고 정확도가 높은 피부 색상 추출 알고리즘을 개발하는데 효과적으로 활용될 것으로 기대된다.

• 한국세라믹학회지
• /
• 제45권4호
• /
• pp.214-219
• /
• 2008

The zirconia ceramics are widely used because of their excellent mechanical properties. Recently, many researches to make a colored zirconia was achieved to satisfy the individual aesthetic requirements. In this study, the synthesis of black-color spinel-based inorganic pigments which are stable above $1400^{\circ}C$ and the fabrication of black-colored zirconia using the synthesized pigments are investigated. Inorganic pigments which have spinel structure and near black color were synthesized by a solid state reaction method using a $Fe_2O_3,\;Cr_2O_3$, CoO and NiO powder as a starting materials at $1600^{\circ}C$. Most of synthesized pigments were black colored spinel phases and single spinel phase was successfully synthesized at the composition range of $Cr_2O_3:25{\sim}35%,\;Fe_2O_3:45{\sim}55%$, CoO:20% and NiO:$6{\sim}10%$. The black-colored zirconia was fabricated at $1410^{\circ}C$ with the 5 wt% synthesized pigments and their properties were evaluated. The results showed that the strength value was more than 848 MPa, absorption rate was 0.1%, the brightness of color was $L^*:40{\sim}42$, the tone of color is $a^*:0.2{\sim}0.8$ and $b^*:-1.1{\sim}2.4$. As a result, the black-colored zirconia was suitable for a artificial jewelry or decoration zirconia goods.

• Restorative Dentistry and Endodontics
• /
• 제42권2호
• /
• pp.118-124
• /
• 2017

Objectives: This study aimed to evaluate the color stability of bulk-fill and nanohybrid resin-based composites polished with 3 different, multistep, aluminum-oxide impregnated finishing and polishing disks. Materials and Methods: Disk-shaped specimens (8 mm in diameter and 4 mm in thickness) were light-cured between two glass slabs using one nanohybid bulk-fill (Tetric EvoCeram, Ivoclar Vivadent), one micro-hybrid bulk-fill (Quixfil, Dentsply), and two nanohybrid incremental-fill (Filtek Ultimate, 3M ESPE; Herculite XRV Ultra, Kerr) resin-based composites, and aged by thermocycling (between $5-55^{\circ}C$, 3,000 cycles). Then, they were divided into subgroups according to the polishing procedure as SwissFlex ($Colt\grave{e}ne/Whaledent$), Optidisc (Kerr), and Praxis TDV (TDV Dental) (n = 12 per subgroup). One surface of each specimen was left unpolished. All specimens were immersed in coffee solution at $37^{\circ}C$. The color differences (${\Delta}E$) were measured after 1 and 7 days of storage using a colorimeter based on CIE Lab system. The data were analyzed by univariate ANOVA, Mann-Whitney U test, and Friedmann tests (${\alpha}=0.05$). Results: Univariate ANOVA detected significant interactions between polishing procedure and composite resin and polishing procedure and storage time (p < 0.05). Significant color changes were detected after 1 day storage in coffee solution (p < 0.05), except Quixfil/Optidisc which was color-stable after 7 days (p > 0.05). Polishing reduced the discoloration resistance of Tetric EvoCeram/SwissFlex, Tetric EvoCeram/Praxis TDV, Quixfil-SwissFlex, and all Herculite XRV Ultra groups after 7 days storage (p < 0.05). Conclusions: Discoloration resistance of bulk-fill resin-based composites can be significantly affected by the polishing procedures.

• 화훼연구
• /
• 제16권1호
• /
• pp.49-56
• /
• 2008

장미의 대표적인 화색인 적색 'Red Corvette', 분홍색 'Nobless'b, 황색 'Golden Metal' 및 백색 'Rose Yumi' 꽃을 재료로 건조방법에 따른 화색의 변화를 조사하고, 4주 및 8주간의 광처리(2,000lux, 16시간, 형광조명) 뒤의 화색 변화를 조사하였다. 모든 종류에서 실리카겔 매트로 압화 하는 처리구가 압화 당시와 광처리 후 화색변화가 가장 적었고, 전기압화기의 사용으로 꽃잎은 갈변화가 촉진되었다. 장미 적색은 한국산 시트지, 분홍색과 황색은 한국산 전기압화기, 장미 백색은 일본산 전기압화기 처리구가 화색의 변화가 가장 심하였다. 압화 당시 화색의 변화가 가장 컸던 것은 적색 장미였고, 그 다음이 분홍색, 황색, 백색 순이었다. 광처리에 의한 화색 변화정도가 가장 심했던 것은 황색 품종이었고, 다른 3종류는 다소 안정적이었다.

• Animal Bioscience
• /
• 제36권5호
• /
• pp.785-796
• /
• 2023

Objective: We aimed to evaluate the color and oxidative stability of beef gluteus medius (GM) from cattle raised in organic and non-organic production systems. Methods: The GM samples (n = 10) were obtained from organic (ORG; n = 5) or nonorganic (NORG; n = 5) beef samples, sliced into 2.54-cm steaks, packaged in aerobic conditions, and stored for nine days at 4℃. ORG and NORG steaks were compared regarding myoglobin concentration, pH, instrumental color, delta E (ΔE), metmyoglobin reducing activity (MRA), and lipid oxidation on days 0, 5, and 9. Results: Feeding system did not influence (p>0.05) the myoglobin concentration. ORG steaks exhibited greater (p<0.05) meat pH, yellowness, and MRA, whereas NORG steaks exhibited greater (p<0.05) redness, chroma, R630/580, delta E, and lipid oxidation. ORG and NORG steaks exhibited similar (p>0.05) lightness and hue angle. During storage, ORG and NORG exhibited an increase in muscle pH, hue angle, and lipid oxidation; and a decrease (p<0.05) in redness, yellowness, chroma, and color stability (R630/580). Both samples exhibited a stable (p>0.05) pattern for lightness and MRA. Conclusion: Therefore, the production system can affect beef color and lipid stability during storage.