• Resources Recycling
• /
• v.12 no.4
• /
• pp.44-50
• /
• 2003

Separation of mixed plastics is not a simple task due to similarities of specific gravity and limitations of sizes, etc. In this study, a new technique was developed to separate plastics selectively by a thermal adhesion method using the different softening or melting temperatures of various types of plastics. Tests were conducted to investigate softening or melting temperatures and adhesion probabilities of plastics with change in temperature. Tests also were conducted to analyze the operating variables, including contact times, size and color pigment. It was founded that LDPE, HDPE and PVC, PET, etc among mixed plastics could be separated selectively according to the change of temperature.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.378-387
• /
• 2000

A rice mill plant with a capacity of 2.5 ton/hr was constructed with automated facilities at Chonnam National University. A simulation model was developed with SLAM SYSTEM for evaluating and improving the rice mill plant. The developed model was validated in the views of hulling efficiency, milling efficiency, milled rice recovery, other materials produced, and bottlenecks in the processes. The results of hulling efficiency, milling efficiency, milled rice recovery in the simulation were, respectively, 81.1%, 89.5%, and 73.1%, while those of the actual mill plant were 81.5%, 90.2%, and 73.5%. The simulation results including the productivity of other materials(chaff, bran, broken rice, stone, etc) produced in the processes were almost similar with those of the actual process. In the simulation the bottlenecks were found out in the processes of separating brown rice and of sorting colored rice. These phenomenon also appeared in the actual process. It needed to increase the hourly capacity of the brown rice separator and the rice color sorter. As the developed model could well express the automated rice mill plant, it could be used for designing and improving rice mill plants. In addition, an alternative model needed to be developed for the system control more accurately and for increasing the rice quality.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.26 no.1
• /
• pp.45-51
• /
• 2015

Objectives : Children with attention-deficit hyperactivity disorder (ADHD) have been shown to display more inhibitory deficits and executive function deficits. This study investigated the treatment effects of neurofeedback (NF) training on executive function by comparing the results of neuropsychological tests of the trained children at pre- and post-training. Methods : Fifteen children with ADHD, aged 6 to 14 years, participated in the study. The NF treatment consisted of slow cortical potential (SCP) training and these sessions took place once a week. The ADHD children performed 20 sessions of NF training within 6 months. Pre-training and post-training assessments encompassed Continuous Performance Test (CPT), Stroop Test, Children's Color Trails Test I&II (CCTT) and Wisconsin Card Sorting Test (WCST). Results : Patients receiving NF training showed significant improvement in visual commission error and standard deviation of auditory response time on CPT ; and total errors on WCST. But there was no significant improvement in the Stroop test and CCTT. Conclusion : SCP training using NF improves the self-regulatory capacities and impulsivity in ADHD patient, especially impulsivity in visual stimulation tasks. This study showed evidence of clinical efficacy of NF on executive function in ADHD.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.3
• /
• pp.525-545
• /
• 2021

The purpose of this study was to assess the sustainability of laundry practices among Korean households in comparison with European households. A total of 329 responses were collected through an online survey and analyzed using SPSS. Detergent dosing, use of fabric softener, prewashing, rinsing, washing programs, and washing temperatures of Korean households were not optimal for sustainability. Only 11.2% of respondents followed dosage instructions while the majority based on load size. Use of fabric enhancer, prewashing, and rinsing were frequent. Cotton 40℃ was the most frequently used program (81.5%) while eco and cold wash programs were among the least (1.5%). In terms of laundry sorting, load size, drying, and ironing, more sustainable actions were reported. Laundry was often sorted by color, machines were commonly filled, and clothes tended to be air-dried and not excessively ironed. Gender was the primary socio-demographic factor denoting sustainable habits, with males being more attentive to instructions and care labels than females. European households, however, were more sustainable in all areas except for frequent ironing, and education level and employment status were significant factors affecting sustainable practices.

• Restorative Dentistry and Endodontics
• /
• v.32 no.1
• /
• pp.19-27
• /
• 2007

The purpose of this study is to develope new dental color-space system. Twelve kinds of dental composites and one kind of dental porcelain were used in this study. Disk samples (15 mm in diameter, 4 mm in thickness) of used materials were made and sample's CIE $L^*a^*b^*$ value was measured by Spectrocolorimeter (MiniScan XE plus, Model 4000S, diffuse/$8^{\circ}$ viewing mode, 14.3 mm Port diameters, Hunter Lab USA) The range of measured color distribution was analyzed. All the data were applied in the form of T### which is expression unit in CNU Cons Dental Color Chart. The value of $L^*$ lies between 80.40 and 52.70. The value of $a^*$ are between 10.60 and 3.60 and $b^*$ are between 28.40 and 2.21. The average value of $L^*$ is 67.40, and median value is 67.30. The value of $a^*$ are 2.89 and 2.91 respectively. And for the $b^*$, 14.30 and 13.90 were obtained. The data were converted to T### that is the unit count system in CNU-Cons Dental Color Chart. The value of $L^*$ is converted in the first digit of the numbering system. Each unit is 2.0 measured values. The second digit is the value of $a^*$ and is converted new number by 1.0 measured value. For the third digit $b^*$ is replaced and it is 2.0 measured unit apart. T555 was set to the value of $L^*$ ranging from 66.0 to 68.0, value of $a^*$ ranging from 3 to 4 and $b^*$ value ranging from 14 to 16.

• Korea Science and Art Forum
• /
• v.37 no.4
• /
• pp.149-159
• /
• 2019

This research was started to identify the color status of signboards at the target site and suggest the direction of improvement for the signboard project in Dongsang-dong, Jongno-gil, a central area of the old city center of Gimhae. The area under study forms a depressed street atmosphere with old facilities, and is a typical type of old city center sign that needs to be rebuilt. The purpose of this study is to investigate prior research related to signage and similar signboard improvement cases, and then to identify the current status of colors by sorting out the casting, auxiliary and highlighted colors through the survey of the color of the signboard in the target area, and to propose a desirable direction for the future sign business based on the basis of these findings. This paper divided the target sections by industry and conducted a color analysis of signboards. The results and contents of the research are as follows. First, cast-colored signboards in general businesses showed a variety of primary color distributions with high L* values, on average, with high intensity and high chromaticity. Second, the auxiliary colors were mostly white or black in color-free, making a contrast between the casting colors. Third, the highlight was that a* value showed a high distribution in positive water plus and was mainly distributed in obsolescence, such as red or yellow, and color was used to reflect the characteristics of each store. However, the stores in the entire section lack unity because they were using colors that were higher in color than middle colors, which was causing the street's aesthetic look to be undermined. Based on the results of these studies, it is thought that the future color scheme for Gimhae's signature improvement project will limit the number of colors to a certain extent and give a sense of security and visual comfort to the use of colorlessness and obscurity around the representative colors of Gimhae.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.2
• /
• pp.79-83
• /
• 2020

A photoelectric grain color sorter is commonly used in postharvest technology to detect and separate grains considered to be of good quality from those of poor quality based on color. In this study, the milled rice of Haedamssal cultivated under early transplanting conditions was evaluated using the color sorting device. Rice was classified according to standard grades of 64% for grade A, 18% for grade B, and 17.2% for grade C. By head rice ratio analysis, the milled rice of Haedamssal was recorded a grade A of 72.9%, representing a 24.5% improvement compared to the 48.4% of original grains. However, the grades B and C of Haedamssal rice were lower than those of original rice. In addition, grade A whiteness of Haedamssal rice was 45.3, which was lower than that of original grains. The color affinity redness was significantly lower in Haedamssal rice than in the screening control. No significant difference was found in the amylose and protein contents of rice before and after selection by the grain color sorter. In contrast, grain viscosity analysis revealed an increase in peak and final viscosities, while the consistence viscosity increased in low grade levels. Our results suggest that the photoelectric grain color sorter could improve the head rice ratio and palatability of early transplanted Hadamssal rice.

• Korean Journal of Biological Psychiatry
• /
• v.19 no.3
• /
• pp.115-120
• /
• 2012

Objectives : Event-related potentials have been suggested as an objective marker for brain functions in psychiatric disorders. This study was aimed to investigate the relationships between P300, the mismatch negativity (MMN), the loudness dependence of the auditory evoked potential (LDAEP), demographic and clinical variables including neurocognitive abilities in patients with schizophrenia. Methods : P300, the MMN, and the LDAEP were measured and the Korean Stroop color-word test (K-stroop test) and the Wisconsin Card Sorting Test (WCST) were performed in 43 patients with schizophrenia. The relationship of the latency and amplitude of P300 and the MMN as well as regression slope of the LDAEP with demographic and clinical variables were analyzed by t-test and correlation analyses for categorical and continuous variables, respectively. Results : After controlling for age, the latency of central (Cz) and parietal (Pz) P300 posivitively correlated with GAF at admission (Cz ; ${\gamma}$ = 0.385, p = 0.047, Pz ; ${\gamma}$ = 0.421, p = 0.029). The amplitude of parietal P300 correlated with the correction rate of the K-stroop test (${\gamma}$ = 0.575, p = 0.002). In addition, the frontal (Fz) P300 latency tended to negatively correlated with the correction rate of the WCST (${\gamma}$ = -0.371, p = 0.057). Conclusions : Our findings suggest that the values of P300 latency and amplitude might be correlated with GAF at admission and working memory measured by the K-Stroop test and the WCST. Meanwhile, the MMN and the LDAEP did not correlate with demographic and clinical variables. These results support the results of previous studies showing associations with P300 and impaired cognitive ability.

• The Journal of Korean society of community based occupational therapy
• /
• v.1 no.1
• /
• pp.41-47
• /
• 2011

Objective : We try to show the necessity of crafts and arts comparing visual perception of autism with that of mental retardation using craft programmes. Methods : We applied a visual perception programme after sorting 10 autism and 10 mental retardation according to criteria. A used craft programmes are consulted and produced by specialist who are applying crafts as treatment or have experienced applying crafts. The items included potter, mobile art, wheat flour kneading, clay, corrugated cardboard work and color mix work. We applied the programmes twice a week during 4 weeks and used motor-free visual perception test-third edition(MVPT-3) to investigate the effect before and after treatments. Results : First, craft programmes had effect on both autism and mental retardation. Second, craft programmes had more effect on mental retardation. Conclusion : We could know that craft programmes influenced on visual perceptional development of autism and mental retardation.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.3
• /
• pp.207-214
• /
• 2014

PURPOSE. This study characterized the synthesis of a modified PMMA (Polymethyl methacrylate) denture acrylic loading platinum nanoparticles (PtN) and assessed its bacterial inhibitory efficacy to produce novel antimicrobial denture base material. MATERIALS AND METHODS. Polymerized PMMA denture acrylic disc ($20mm{\times}2mm$) specimens containing 0 (control), 10, 50, 100 and 200 mg/L of PtN were fabricated respectively. The obtained platinum-PMMA nanocomposite (PtNC) was characterized by TEM (transmission electron microscopy), SEM/EDX (scanning electron microscope/energy dispersive X-ray spectroscopy), thermogravimetric and atomic absorption spectrophotometer analysis. In antimicrobial assay, specimens were placed on the cell culture plate, and $100{\mu}L$ of microbial suspensions of S. mutans (Streptococcus mutans) and S. sobrinus (Streptococcus sobrinus) were inoculated then incubated at $37^{\circ}C$ for 24 hours. The bacterial attachment was tested by FACS (fluorescence-activated cell sorting) analysis after staining with fluorescent probe. RESULTS. PtN were successfully loaded and uniformly immobilized into PMMA denture acrylic with a proper thermal stability and similar surface morphology as compared to control. PtNC expressed significant bacterial anti-adherent effect rather than bactericidal effect above 50 mg/L PtN loaded when compared to pristine PMMA (P=.01) with no or extremely small amounts of Pt ion eluted. CONCLUSION. This is the first report on the synthesis and its antibacterial activity of Pt-PMMA nanocomposite. PMMA denture acrylic loading PtN could be a possible intrinsic antimicrobial denture material with proper mechanical characteristics, meeting those specified for denture bases. For clinical application, future studies including biocompatibility, color stability and warranting the long-term effect were still required.