• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.499-504
• /
• 2006

To improve the quality of coating paper, many areas, such as the manufacturing process of inorganic pigment for the coating, the property change of coating color, the surface design of coating pigment and the productivity of coated paper, were studied. In this study the physical properties and printability of coated paper were compared with the coating pigment to modify the surface of large particle and the coating pigment to mix together the large and small particles. After the coating color was mixed under the same conditions in order that the coating color has the same printability, the printability change caused by the surface modification of coating color was investigated. With the surface SEM of coated paper, the efficiency of the surface modification of coating pigment was investigated. The physical property and printability of coated paper, in addition to the physical properties of coating color, were compared and evaluated. Also, the efficiency of printability was evaluated, changing the mixing condition.

• 복식문화연구
• /
• 제24권5호
• /
• pp.577-587
• /
• 2016

Natural dye extracted from Salicornia bigelovii was applied to silk fabrics by dip dyeing process. The dyeing properties and the functionalities of the silk fabrics were determined. Factors affecting the dyeing properties such as dyestuff concentration, temperature, time and pH were studied. The colorimetric parameters $L^*$, $a^*$, $b^*$, and H, V/C values were measured to select the optimal mordanting conditions. The color-fastnesses of the dyed and mordanted fabrics were estimated for practical use; in addition, the antibacterial property, ultraviolet protection properties were evaluated. The dyeabilities of silk increased depending on the increasing dye concentration, dyeing time, and dyeing temperature. And optimum dyeing results were achieved when dyeing with 300% (o.w.f.) of dye concentration at $90^{\circ}C$ for 100 minutes and at pH 3. The dyed silk fabrics without mordants produced yellow (Y) color and showed yellow (Y) or green yellow (GY) colors depending on the mordants type. The light fastness of dyed and Al mordanted silk fabrics were found to be excellent, and the drycleaning and rubbing fastness were good. The dyed silk fabrics showed no antibacterial property, but Al and Cu mordanted silk fabrics showed 99.9% reduction rate. The ultraviolet protection properties of the dyed silk fabric was improved. And the ultraviolet protection properties of mordanted samples showed very good ultraviolet protection properties.

• 한국가정과학회지
• /
• 제7권1호
• /
• pp.43-50
• /
• 2004

The purpose of this study is to reach silk protein added in differing amounts to Jeolpyon, Korean traditional rice cake, using rice powder as its primary material, estimation of the micro organism quality, physicochemical property, sensory evaluation and the property of storage period (20${pm} 5 ^{\circ}C$). In the physicochemical property, the content of proximate composition of rice powder was measured as 38.11% of moisture, 56.62% of total sugar, 5.11% of crude protein, 0.52% of crude lipid, 0.25% of ash. And the raw material of silk protein was measured as 6.61% of moisture, 91.22% of crude protein, 6.41% of crude lipid and 0.75% of ash. The pH of raw material for rice powder and silk protein Jeolpyon showed mild acidity as 6.41 and 6.23, respectively. In rice powder and silk protein, total free sugar contents was 0.89% and 0.02%, and total amino acids contents was 4.28% and 52.21 %, respectively. For sensory evaluation. color, taste, softness and adhesiveness were significantly acceptable in control and adding 1 % silk protein. Control and samples added 1$\sim$3% silk protein had high sensory score color in overall acceptance. In conclusion. Jeolpyon can be manufactured with nutritious Jeolpyon by adding silk protein.

• 방사선산업학회지
• /
• 제5권4호
• /
• pp.383-391
• /
• 2011

This study was conducted to investigate the applicability of gamma irradiation for improving the quality of paprika and Japanese apricot extract-treated nitrite free pork jerky. Pork jerky was gamma-irradiated at 0, 3, 5, 7 and 10 kGy and physiochemical properties such as proximate composition, 2-thiobarbituric acid (TBARS) values, color stability, texture, and sensory property were then evaluated. The results showed that the treatment of paprika and Japanese apricot extract to the pork jerky increased Hunter color value and texture property and at the same time decreased TBARS values. When gamma irradiated, natural pigment extract-treated pork jerky did not produce any change in its proximate composition (moisture, crude protein, crude lipid contents), and TBARS values. However, the redness (a-value) of pork jerky increased as the irradiation dose increased, whereas shear force of pork jerky was decreased. Sensory result showed that gamma irradiation induced to decrease the sensory scores. Therefore, these results suggest that gamma irradiation and the addition of paprika and Japanese apricot extracts could be an effective mean to improve color and texture of restructured pork jerky without use of nitrite.

• 한국의류학회지
• /
• 제21권4호
• /
• pp.661-668
• /
• 1997

The dyeing characteristics of acorn was investigated. The natural Fabrics-cotton, rayon and silk-were dyed repeatedly in the solution extracted from acorn, CuSO4, K2Cr2O7 and brine were used as mordants to improve color fastness. Anti-bacterial property was measured in the dyed and mordant treated fabrics. When the cotton and rayon fabrics were dyed and treated with CuSO4, their colors showed very clear. They also had good color fastness and excellent anti-bacterial property. The dyed silk fabrics had better dye absorption property than the cotton and rayon fabrics without mordant treatment. But the fabrics dyed without mordant treatment had low light fastness. The cotton, rayon and silk fabrics dyed and treated with brine were dark and unclear. An aftertreatment with CuSO4 and K2Cr2O7 made the dyed fabrics darter and more clear.

• 패션비즈니스
• /
• 제10권1호
• /
• pp.120-131
• /
• 2006

Recently, it has been reported that chemical hair coloring can cause allergic reactions, the toxicity issue of chemical hair color was issued. Therefore, there is an increasing interest in the hair coloration technique using non-toxic and bio-compatible hair color gotten from natural resource. In this study, the possibility using fermented Indigo as natural hair coloring agent was investigated. Bleached hair samples were dyed using Indigo, and the effect of dyeing frequency, the physical change after dyeing, color, surface and cross-section characteristics, and tensile property were also studied. In addition, the protection property of cationic detergent finishing on damaged hair samples were also studied. The following conclusions are made; 1. While bleached hair samples with low value showed the negligible effect of repeated dyeing, bleached hair samples with high value showed the good effect of repeated dyeing. 2. Hair sample dyed with Indigo showed a high light-fastness, however, tensile strength and elongation showed very low values (high damage on hair sample). 3. Cationic detergent finishing did not affect on the colorfastness because of decoloration after dyeing, however, it increased the smoothness of hair sample, and therefore, can use as protectant of damaged hair. 4. Hair scale was damaged after dyeing. It seemed that the alkali, potassium carbonate, increased pH of dyeing bath to 11, as a result, the hair was swollen, weaken, and dissolved on the prolonged dyeing time. Dyed hair sample became stiff and fine. 5. The color difference was 4.62 (a high fastness value) in the test of sunlight exposure, shampoo, cationic detergent finishing, and acid perspiration fastness.

• 한국광학회지
• /
• 제19권4호
• /
• pp.294-301
• /
• 2008

콜레스테릭 액정 컬러 필터의 광학적 특성 분석을 위한 모델링 및 시뮬레이션을 수행하였다. Berreman $4{\times}4$ 행렬법을 사용하여 입사각도별 콜레스테릭 액정 컬러 필터의 반사 스펙트럼을 계산하였고, 이를 광선 추적법에 기초한 조명설계 소프트웨어인 LightTools의 사용자 정의 코팅 파라미터로 입력하였다. LightTools를 이용하여 평면 투과형 콜레스테릭 액정 컬러 필터의 시야각에 따른 색변화를 시뮬레이션 하였다. 5도 간격 이하의 입사각도별 반사 스펙트럼을 LightTools의 사용자 정의 코팅 파라미터로 사용하였을 때, Berreman $4{\times}4$ 행렬법의 결과와 부합하는 결과를 얻을 수 있었다. 또한 반구형 패턴을 갖고 있는 반사형 콜레스테릭 액정 컬러 필터의 시야각에 따른 색변화를 시뮬레이션 하였는데, 본 논문의 시뮬레이션 방법을 비 평면형 구조에도 적용할 수 있음을 확인하였다.

• 디지털산업정보학회논문지
• /
• 제15권1호
• /
• pp.99-107
• /
• 2019

Retinex-based image enhancement is a technique that utilizes the property that the human visual characteristics are sensitive to the difference from the surrounding pixel value rather than the pixel value itself. These Retinex-based algorithms show different characteristics of the improved image depending on the applied color space or gamma correction. In this paper, we set eight different experimental conditions according to the application of color space and gamma correction, and analyze the objective and subjective performance of each Retinex based image enhancement algorithm and apply it to the implementation of Retinex based algorithm. In the case of gamma correction, quantitative low entropy images and low contrast images are obtained. The application of Retinex technique in HSI color space rather than RGB color space is found to be high in overall subjective image quality as well as maintaining color.

• 한국생활과학회지
• /
• 제18권3호
• /
• pp.749-756
• /
• 2009

Keeping abreast with the latest consumer's trends, industries are focusing on sensibility aspects of products to meet consumer's needs. The car(?) seat cover fabrics are more closely related to human senses than anything else. This study attempted to investigate which seat cover fabric can give good feeling to consumers and to analyze their characteristics. Twelve kinds of jacquard fabric used for seat cover were selected. The Kawabata Evaluation System was used to measure the mechanical properties of 12 jacquard fabrics, and tactile sensibility(TS), and preference(P) determined by subjective evaluation of 160 participants were also utilized. The stepwise regression analysis was made to select the most significant mechanical properties, and some models for predicting tactile sensibility and preference was developed. The results are briefly summarized as follows: the most important parameter to choose seat cover fabric is a "hygienic property" and the other parameters are 'materials with color fastness', 'compressive property', 'color', 'antibacterial property', 'easy-care property'. The LogSMD, LogB, LC, EM were selected as significant mechanical properties affecting tactile sensibility. Also, the LC, LogB, LogSMD, LogWC, LogMMD were selected as significant mechanical properties affecting preference.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권6호
• /
• pp.138-144
• /
• 2013

비노출형 도막방수재 도포 후 누름콘크리트 타설 시기에 따른 도막방수재의 물리적 특성과 바탕면 조건, 도막두께 및 보강포 사용유무에 따른 내피로성을 검토하였는데, 누름콘크리트 타설 시기가 짧을수록 변색이 심하였고, 도막두께가 두꺼운 반면 인장성능이 낮았다. 내피로 성능은 3 mm의 도막두께에서는 파단되지 않았으나 1, 2 mm는 모두 파단 되었고 부직포로 보강한 경우의 내피로성능이 상대적으로 우수한 것으로 나타났다.