• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.1
• /
• pp.10-15
• /
• 2021

'Gwangyoung', a winter forage triticale cultivar (X Triticosecale Wittmack), was developed at the Department of Rice and Winter Cereal Crop, NICS, RDA in 2018. The cultivar 'Gwangyoung' has leaves of wide width, medium length, and green color, and spikes of medium length and yellowish-brown color, and a large grain of yellowish-brown color. The heading date of the cultivar 'Gwangyoung' was April 22 which was similar to check cultivar 'Shinyoung'. Its tolerance or resistance to cold, lodging, wet injury powdery mildew, and leaf rust were also similar to those of the check cultivar. The leaf blade ratio of 'Gwangyoung' (27.5%) was higher than that of 'Shinyoung' (21.2%). The average forage fresh and dry matter yield of cultivar 'Gwangyoung' at milk-ripe stages were 50.0 and 17.6 MT ha-1, respectively, which were higher than those (47.7 and 17.1 MT ha-1) of the check cultivar. The silage quality of 'Gwangyoung' was lower than that of the check cultivar 'Shinyoung' in crude protein content (5.3%) and total digestible nutrients (61.3%), while was higher than the check cultivar in neutral detergent fiber (58.2%) and acid detergent fiber (34.9%). 'Gwangyoung' showed the silage of 1 grade and a grain yield of 6.03 MT ha-1.

• Electrical & Electronic Materials
• /
• v.12 no.7
• /
• pp.7-11
• /
• 1999

Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.5
• /
• pp.497-504
• /
• 2013

This research uses numerical analysis to examine the tunnel portal landscape affecting the brightness level of interior lighting when designing lights for road tunnels through the L20 method. In order to extract the brightness recognition per form of a tunnel entrance and to evaluate the effects of the characteristics of the materials of facilities near a tunnel portal, brightness analysis was conducted by filming brightness on a video photometer called Hi-land Elf System, and a surface brightness photometer called LMK Mobile Advanced. Tunnels in Korea are mostly distributed in mountain areas; thus, the ratio occupied by the sky, which has the highest brightness within the angle of L20, is close to zero, while most of the ratio was occupied by brightness by the area near the tunnel entrance or road surface. However, for a tunnel portal retaing wall, which allows the width of a tunnel entrance to seem wider within the L20 angle, appeared to be have higher brightness compared to nearby areas or the surface, which is an element increasing the tunnel portal brightness within the tunnel, and the road facilities near the tunnel portal appeared to have an effect on the brightness as well. Thus, when designing tunnel lights based on brightness, the form of the tunnel entrance and the area width, material, and color of areas near the tunnel portal appeared to affect outside brightness and become an element affecting the establishment of the brightness level of the interior lights of tunnels. Consequently, reviewing such matters is a prerequisite when designing tunnel portal landscape.

• Korean Journal of Ichthyology
• /
• v.33 no.3
• /
• pp.157-166
• /
• 2021

Three specimens, presumed to be natural hybrids between Rhodeus notatus and R. ocellatus, were collected from Onyangcheon Stream area, Jwabu-dong, Asan-si, Chungcheongnamdo, the Republic of Korea, and morphological and phylogenetic analyses were performed to clearly identify their parent species. The body color of the three natural hybrids was light greenish-brown on dorsal side, and the size of red area on the upper front of the dorsal fin and the outer margin of the anal fin generally showed intermediate characters between the parent species, R. notatus and R. ocellatus. Among the measurement and meristic characters, the ratio of prepectoral length and preanal length in the standard length, and the ratio of snout length, interorbital width, length of caudal peduncle and depth of caudal peduncle in the head length, and the number of longitudinal row scales were analyzed as the unique characters of natural hybrids. In the rag1 gene of nuclear DNA, the three natural hybrids were analyzed to be reflected all the single nucleotide polymorphism sites between R. notatus and R. ocellatus, and in the phylogenetic tree using the cytb gene of mitochondrial DNA, they formed the same genetic clade as R. notatus. Therefore, three specimens, presumed to be natural hybrids analyzed in this study were identified as interspecific hybrids between female R. notatus and male R. ocellatus.

• Science of Emotion and Sensibility
• /
• v.13 no.3
• /
• pp.573-580
• /
• 2010

The earlier KANSEI evaluation had to choose not to overlap the opposite meaning of the words, had to choose that some figures are shown step by step and had to choose be prepared things in advance. However, The Study shows a method which visualizes the imprecise evaluations of human without choosing evaluation items which are not prepared figures. The program is used the way which is entered by hand-drawing that the subjects use the way to enter their subjective feelings about the evaluations presented by using the mouse or the graphics tablet. It is possible to express imprecise things about evaluations and the method of drawing is free. The program provides that we can express our thinking by drawing and there are a few limits and the prescribed standard. The area ratio of each circle is expressed as a pie chart and the area of circle what is drawn which is counted automatically at the same time. These things are possible not only to modify a transparency, a thickness of a line, a color and the area of circle what is drawn, but also to adjust the area of circle. The conceptual model is visualized that expresses something by hand-drawing such as a circle. The conceptual model has wide range of applications such as a personnel evaluation, a suffering evaluation and product evaluation. The program currently has been testing the effective of the program's possibilities which is used with the personnel appraisal tool of the nurses themselves who work in nurse support department where the St. Marianna University School of Medicine Hospital is. And also the program is proceeding with development to visualize the conceptual model by dynamic interfaces effectively and the program is applied such as KJ method and a program is used to express the kind of the patient's pain and its level.

• Korean Journal of Medicinal Crop Science
• /
• v.15 no.3
• /
• pp.194-198
• /
• 2007

Yield and ginsenoside contents of ginseng (Panax ginseng C. A. Meyer) is affected by light intensity and quality, and the color and the thickness of PE shading net when PE net is utilized for shading material. This study was carried out to investigate the effect of light quality on root yield and ginsenoside contents off-year-old ginseng by using polyethylene shading net with each blue and yellow color, Spectral irradiance under blue and yellow shading net showed the peak at 498 nm and 606 nm, respectively, which made distinct difference in light quality. Heat injury ratio of blue shading net was increased distinctly more than that of yellow shading net in summer season because of higher transmitted quantum (23%)and air temperature (0.3 $^{\circ}$C) in blue shading net than those of yellow shading net. Chlorophyll content and leaf area under yellow shading net were higher than those of blue shading net, and its heat injury ratio was lower than those of blue. These effects may led to 48% higher increase of root yield under yellow shading net than that under blue shading net. The content of total ginsenoside in taproot was not significantly differed between blue and yellow shading net, while the content in lateral and fine root was significantly increased in blue shading net compared to yellow shading net. PDM ratio of blue shading net showed more significant increase in lateral root than that of yellow shading net. All of Rb$_1$/Rg$_1$ ratio in three parts of root under blue shading net was higher than that of yellow shading net, but there were no significant increase in the ratio of lateral root.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.2
• /
• pp.206-215
• /
• 2009

This experiment was carried out to evaluate performance and carcass characteristics of 40 crossbred young bulls ($Zebu{\times}European$) finished in a feedlot under two roughage sources (Bermuda grass hay or sorghum silage) with or without the addition of yeast (Saccharomyces cerevisae). The bulls were 20 months old, their initial average weight was 356 kg and they were allocated into four groups of ten animals. The experimental diets were Bermuda grass, Bermuda grass+yeast, sorghum silage and sorghum silage +yeast. Animal performance and carcass characteristics were not influenced by roughage source or yeast addition. The average daily weight gain was 1.50 kg, dry matter intake (DMI) was 11.1 kg/d, DMI as percentage of liveweight was 2.60% and feed dry matter conversion was 7.70. The mean dressing percentage was 52.0% and hot carcass weight was 268 kg. Carcass conformation was classified between good-minus to good. Carcass length (137 cm), leg length (72.9 cm) and cushion thickness (26.6 cm) were not influenced by treatments. The average fat thickness was 3.80 mm and the Longissimus muscle area was 66.9 $cm^{2}$. The classification of color, texture and marbling were slightly dark red to red, fine and slight-minus to light-typical, respectively. The mean percentage of bone, muscle and fat in the carcass was 15.5%, 62.3% and 22.5%, respectively. Yeast addition increased ${\gamma}$-linolenic fatty acid (0.15 vs. 0.11%) deposition. Bermuda grass hay increased deposition of ${\alpha}$-linolenic (0.49 vs. 0.41%), arachidonic (2.30 vs. 1.57%), eicosapentaenoic (0.41 vs. 0.29%), docosapentaenoic (0.80 vs. 0.62%), docosahexaenoic (0.11 vs. 0.06%) and n-3 fatty acids, and reduced n-6: n-3 ratio in meat, when compared to sorghum silage treatments. The treatments had no effect on saturated fatty acids (49.5%), polyunsaturated fatty acids (11.8%), n-6 fatty acids (9.87%), n-3 (1.61%) and PUFA:SFA ratio (0.24). Monounsaturated fatty acid levels were higher on sorghum silage (40.7 vs. 37.7%). The addition of yeast caused higher n-6: n-3 ratio (7.28 vs. 5.70) than treatments without yeast.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.5
• /
• pp.208-215
• /
• 2005

The 10mm diameter aggregates made of clay, carbon and $Fe_2O_3$ were prepared to investigate the mechanism of black core formation. The specific gravity, absorption rate, percent of black core area, fracture strength, total Fe analysis, and XRF were measured at various compositions, sintering temperatures, sintering times, sintering atmospheres, and sintering methods. Small addition of $Fe_2O_3$ did not affect physical properties of the aggregates; however, the percent of black core area increased with increasing carbon contents and increasing sintering temperature. Specific gravity of the aggregates decreased and the water absorption ratio increased with increasing percent of black core area. The aggregates sintered at oxidation atmosphere showed clear border between shell and black core area. Hence, the aggregates sintered at reduction atmosphere showed only black core area in the cross-section of the aggregates. The specific gravity of the aggregates sintered at reduction atmosphere increased with increasing carbon contents and that was the lowest of all comparing other aggregates sintered at different atmospheres. Adsorption rate increased with increasing carbon contents at all atmospheres. The fast sintered aggregates showed lower specific gravity, higher absorption rate, and more black core area than the normally sintered aggregates. It was turned out that the aggregates having more black core area showed higher fracture strength than that of aggregates with no black core area. From the total Fe analysis, the concentration of Fe and FeO was higher at black core area than at shell. Because the concentration of $Fe_2O_3$ in the shell was higher than other area, the color of the shell appeared red. It was also turned out from the XRF analysis that carbon was exist only at black core area.

• Journal of Bio-Environment Control
• /
• v.14 no.1
• /
• pp.56-62
• /
• 2005

This study was conducted to investigate the effect of grafting methods on plug seedling quality, growth after transplanting, and yield of oriental melon that those seedlings were raised in the 32 hole plug tray for protected cultivation. Number of leaf and leaf area in approach grafting were higher until 15 days after grafting but lower on 20 days after grafting. Plant height, stem diameter and content of chlorophyll were nearly the same of each grafting methods on 20 days after grafting. Growth of top part, that is, plant height, leaf number, and leaf area on root removed single cotyledon ordinary splice grafting was the highest among the grafting methods. In the underground part, dry weight of root was high and T/R ratio was the lowest. Seedling quality of root removed single cotyledon ordinary splice grafting was the highest among grafting methods before transplanting. Plant height, number of leaf, leaf area and dry weight of root removed single cotyledon ordinary splice grafting in the growth of field were the highest on 30 days after grafting among grafting methods and days required for first flowering was also shorter, 38.4 days among grafting methods. But Fruit weight, content of soluble solids, fruit hardness, and color characteristics in fruit quality were insignificant among each grafting methods. Consequently, grafting methods influenced on the seedling quality, of oriental melon early growth after transplanting and yields. It was concluded that root removed single cotyledon ordinary splice grafting was the best methods in present study. It will be needed to convert grafting methods. Thus new grafting method should be applied.

• Journal of KIISE:Information Networking
• /
• v.32 no.3
• /
• pp.318-326
• /
• 2005

This paper presents the image feature extraction method and the image classification technique to select the harmful image flowed from the Internet by grade of image contents such as harmlessness, sex-appealing, harmfulness (nude), serious harmfulness (adult) by the characteristic of the image. In this paper, we suggest skin area detection technique to recognize whether an input image is harmful or not. We also propose the ROI detection algorithm that establishes region of interest to reduce some noise and extracts harmful degree effectively and defines the characteristics in the ROI area inside. And this paper suggests the multiple-SVM training method that creates the image classification model to select as 4 types of class defined above. This paper presents the multiple-SVM classification algorithm that categorizes harmful grade of input data with suggested classification model. We suggest the skin likelihood image made of the shape information of the skin area image and the color information of the skin ratio image specially. And we propose the image feature vector to use in the characteristic category at a course of traininB resizing the skin likelihood image. Finally, this paper presents the performance evaluation of experiment result, and proves the suitability of grading image using image feature classification algorithm.