• 한국전기전자재료학회논문지
• /
• 제32권3호
• /
• pp.246-251
• /
• 2019

A solvent free, highly concentrated silica-acryl monomer hybrid sol was synthesized using aqueous colloidal silica as a precursor. The effects of the silica particle size, type of surface treatment agent employed, and silica content on the formation of the hybrid sol were systematically studied. The optical and physical properties of the coating solution prepared using the hybrid sol were also characterized. The viscosity of the hybrid sol tended to decrease as the particle size of the silica and the molecular weight of the surface treatment agent increased. The PET substrate coated with MPTMS-Mix (mixture, 70 wt%) solution showed the highest surface hardness (6 H) and low surface roughness ($Ra=0.044{\mu}m$), which could be attributed to an increase in packing density caused by the infiltration of small particles into the pores formed between larger particles.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.1930-1932
• /
• 2005

Colloidal Silica(CS)/methyltrimethoxy silane(MTMS) and CS/MTMS/epoxy silane(Es) sol solutions were prepared in variation with synthesizing parameters such as kinds of CS, kinds of silane and reaction time. In order to understand its physical and chemical properties, sol-gel coating films on glass were fabricated. In the case of CS/MTMS sol, the coating films had high contact angle and more enhanced flat surface than those in the case of CS/MTMS/ES sol. Also, the coating films obtained from single CS had a better flat surface than those obtained from mixed CS. In the case of thermal stability, thermal dissociation of CS/MTMS and CS/MTMS/ES sol-gel coating films did not occur up to $550^{\circ}C$ and $440^{\circ}C$ respectively. The thickness of coating films obtained from CS/MTMS sol increased than those of CS/MTMS/ES sol. In addition, the coating films obtained from single CS were more thicker than those obtained from mixed CS.

• Korean Chemical Engineering Research
• /
• 제45권6호
• /
• pp.611-618
• /
• 2007

아민기로 코팅된 단분산 폴리스티렌 입자를 제조한 뒤 톨루엔-물로 구성된 유중수 액적(oil-in-water emulsion) 내부에서 입자를 자기 조립(self-assembly)시켜 다양한 다면체(polyhedra) 구조의 콜로이드 클러스터(colloidal cluster)를 제조하였다. 콜로이드 클러스터의 표면에서 솔-젤(sol-gel) 반응을 유발한 뒤 표면이 실리카로 코팅된 복합(composite) 콜로이드 클러스터를 제조할 수 있었고 이를 주형(template)으로 활용하여 고온 소성에 의해 내부의 폴리스티렌 입자를 제거하고 마이크로미터 크기의 다양한 구조의 비구형상 공동 입자(hollow particle)를 제조하였다. 밀도구배원심분리법 (density gradient centrifugation)에 의해 폴리스티렌 구성 입자의 수와 구조가 균일한 콜로이드 클러스터를 제조할 수 있었으며 표면 솔-젤 반응에 의해 비구형상 구조의 공동 입자를 제조하였다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.265-266
• /
• 2006

The chemical conversion coating formed on magnesium alloy investigated for low cost and harmless in environment by using the colloidal silica as the main component. The film formed in 298 K is thick, the film, which was thought combination of Si-O, was formed. The film formed in 313 K is thinner than that in 298 K. The quantity of film formed at high temperature such as 333 K and 353 K is smaller than dissolved quantity. At the anodic polarization experiment, corrosion resistance in sealing by hot water after chemical conversion treatment in basic solution condition get worse than that in comparison with basic solution condition. In salt spray test, the ratio of black rust on specimen that did not conducted chemical conversion treatment was five times or more compared with those of chemical conversion treated specimen. The film thickness of chemical conversion coating produced by alkali treatment process is thinner than in comparison with that of specimen produced in basic chemical conversion treatment solution condition. It is thought, however, that it showed good corrosion resistance during salt spray test because the area of microcracks is small.

• 한국세라믹학회지
• /
• 제51권3호
• /
• pp.177-183
• /
• 2014

Alumina-silica composite coating layers were prepared by electrophoretic deposition (EPD) of plate-shaped alumina particles dispersed in a sol-gel binder, which was prepared by hydrolysis and the condensation reaction of methyltrimethoxysilane in the presence of colloidal silica. The microstructure and the electrical and thermal properties of the coatings were compared according to the EPD process parameter: voltage, time and the content of the plate-shaped alumina particles. The electrical insulation property of the coatings was measured by a voltage test. The coatings were prepared by EPD of the sol-gel binder with 5-30 wt% plate alumina particles on parallel electrodes at a distance of 2 cm for 1-10 min under an applied voltage of 10-30 V. The coatings experienced increased breakdown voltage with increasing thickness. However, the higher the thickness was, the smaller the breakdown voltage strength was. A breakdown voltage as high as 4.6 kV was observed with a $400{\mu}m$ thickness, and a breakdown voltage strength as high as 27 kV/mm was achieved for the sample under a $100{\mu}m$ thickness.

• 공업화학
• /
• 제29권4호
• /
• pp.425-431
• /
• 2018

UV 및 블루라이트를 차단하는 세륨 옥사이드 나노 입자와 다공성 실리카와의 복합입자를 건식 코팅 공정을 통해 제조하였다. 실리카와 세륨 옥사이드 간 혼합 비율과 메카노 퓨전 장치의 챔버 회전속도 등의 제조 조건을 달리하여 여러 복합입자를 만든 후, 입자 표면 형태를 SEM으로 관측 비교하고 XRF을 통해 복합입자의 조성을 분석하였다. 세륨 옥사이드를 실리카와 함께 복합입자로 만들어 물에 분산시키면 현탁 용액의 투명도가 높아지고 분산 안정성이 향상되었다. 또한 파우더의 유동성과 발림성이 개선되었다. 본 연구를 통해 세륨 옥사이드/실리카 복합입자가 자외선 및 블루라이트를 차단하는 기능성 화장품 소재로 사용 가능함을 확인하였다.

• 한국결정성장학회지
• /
• 제6권4호
• /
• pp.521-531
• /
• 1996

분무건조법을 이용하여 무기질막 microcapsule과 무기질/유기질막 microcapsule을 제조하였다. 무기질막 microcapsule은 core 물질로 $K_{4}SO$와 clay shell 물질로 colloidal silica를 사용하였고, 무기질/유기질막 microcapsule은 core 물질로 상기 제조된 무기질막 microcapsule을 shell 물질로는 ethyl cellulose를 사용하여 각각의 microcapsule를 제조하였다. 제조된 microcapsule이 기능성을 갖기 위하여는 구형의 균일한 표면과 세공용적이 매우 중요하다. 무기질막 microcapsule인 경우 core/shell의 체적비가 0.3/0.7인 경우 구형의 균일한 표면의 microcapsule이 제조되었으며, 무기질/유기질막 microcapsule인 경우, 무게비가 0.76/0.24일 때 균일한 표면을 갖는 microcapsule이 제조되었다. 무기질/유기질막 microcapsule인 경우, 무기질막 microcapsule보다 세공용적이 감소하였고, shell물질(ethyl cellulose)의 양이 증가할수록 피복이 균일하게 되며, 세공용적도 감소하였다.

• 한국세라믹학회지
• /
• 제41권10호
• /
• pp.766-770
• /
• 2004

구형 실리카 나노 콜로이드 입자를 이용하여 반사방지막을 제조하였다. 실리카 콜로이드 현탁액을 모세관 힘을 이용하여 기울어진 두 장의 유리판 사이에 저장한 후 위의 유리를 이동시켜 반사 방지막을 코팅하였다. 상판 유리의 이동속도가 빨라질수록 막의 두께는 감소하였고, 막의 두께 변화에 따라 광 투과율이 변하였다. SEM으로 관찰된 실리카 나노 입자는 최밀충진에 가깝게 유리 기판에 부착되어 있었으며, 이로부터 고체 입자와 기공을 포함하는 막의 유효 굴절율을 구하였다. 최대의 광투과율을 나타내는 파장과 유효 굴절율로 부터 계산한 막의 두께는 SEM 사진 및 profiler로 구한 값과 잘 일치하였다. $94.7\%$의 최대 광투과율을 얻었으며, 양면으로 코팅한다면 $97.4\%$의 투과율 즉 $1.3\%$의 반사율을 얻을 수 있는 것으로 나타났다.

• 한국분말재료학회지
• /
• 제21권5호
• /
• pp.377-381
• /
• 2014

This work describes the coloration, chemical stability of $SiO_2$ and $SnO_2$-coated blue $CoAl_2O_4$ pigment. The $CoAl_2O_4$, raw materials, were synthesized by a co-precipitation method and coated with silica ($SiO_2$) and tin oxide ($SnO_2$) using sol-gel method, respectively. To study phase and coloration of $CoAl_2O_4$, we prepared nano sized $CoAl_2O_4$ pigments which were coated $SiO_2$ and $SnO_2$ using tetraethylorthosilicate, $Na_2SiO_3$ and $Na_2SiO_3$ as a coating material. To determine the stability of the coated samples and their colloidal solutions under acidic and basic conditions, colloidal nanoparticle solutions with various pH values were prepared and monitored over time. Blue $CoAl_2O_4$ solutions were tuned yellow color under all acidic/basic conditions. On the other hand, the chemical stability of $SiO_2$ and $SnO_2$-coated $CoAl_2O_4$ solution were improved when all samples pH values, respectively. Phase stability under acidic/basic condition of the core-shell type $CoAl_2O_4$ powders were characterized by transmission electron microscope, X-ray diffraction, CIE $L^*a^*b^*$ color parameter measurements.

• Journal of Electrochemical Science and Technology
• /
• 제2권1호
• /
• pp.51-56
• /
• 2011

We develop a new nonwoven composite separator for a safer lithium-ion battery, which is based on coating of silica ($SiO_2$) colloidal particles/styrene-butadiene rubber (SBR) binder to a poly(ethylene terephthalate) (PET) nonwoven support. The $SiO_2$ particles are interconnected by the SBR binder and closely packed in the nonwoven composite separator, which thus allows for the development of unusual porous structure, i.e. highly-connected interstitial voids formed between the $SiO_2$ particles. The PET nonwoven serves as a mechanical support that contributes to suppressing thermal shrinkage of the nonwoven composite separator. The $SiO_2$/SBR content in the nonwoven composite separators plays an important role in determining their separator properties. Porous structure, air permeability, and electrolyte wettability of the nonwoven composite separators, in comparison to a commercialized polyethylene (PE) separator, are elucidated as a function of the $SiO_2$/SBR content. Based on this understanding of the nonwoven composite separators, the effect of $SiO_2$/SBR content on the electrochemical performances such as self-discharge, discharge capacity, and discharge C-rate capability of cells assembled with the nonwoven composite separators is investigated.