• Journal of Communications and Networks
• /
• 제11권1호
• /
• pp.1-10
• /
• 2009

In this paper, we propose a chip-level detection and a spectral-slice scheme for the tunable-transmitter/fixed-receiver (TTFR)-based asynchronous spectral phase-encoded optical codedivision multiple-access (CDMA) system combined with timeencoding. The chip-level detection can enhance the tolerance of multiple access interference (MAI) because the channel collision does not occur as long as there is at least one weighted position without MAI. Moreover, the spectral-slice scheme can reduce the interference probability because the MAI with the different frequency has no adverse effects on the channel collision rate. As a result, these techniques mitigate channel collisions. We analyze the channel collision rate theoretically, and show that the proposed system can achieve a lower channel collision rate in comparison to both conventional systems with and without the time-encoding method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.232-237
• /
• 1998

This paper describes a new method for estimating time-to-collision which exhibits high tolerance to noise contained in camera images. Time to collision (TTC) is one of the most important parameters available from a camera attached to a mobile machine. TTC indirectly stands far the translation speed of the camera and is usually calculated either from successive images or optical flow by using intimate relationship between TTC and flow divergence. In most cases, however, it is not easy to get accurate optical flow, which makes it difficult to calculate TTC. In this study it is proved that if the target has a smooth surface, the average of divergence over any point-symmetric region on the image is equal to the divergence of the center of the region. It means that required divergence can be calculated by integrating optical flow vectors over a symmetric region. It is expected that in the process of the integration, accidental noise is canceled if they are independent of optical flow and the motion of the camera. Experimental results show that TTC can be estimated regardless of the surface condition. It is also shown that influence of noise is eliminated as the area of integration increases.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.208-216
• /
• 2003

ISO 14649 (data model for STEP-NC) is a new interface scheme or language for CAD-CAM-CNC chain under established by ISO TC184 SCI. Up to this point, the new language is mainly made for milling and turning, and other processes such as EDM will be completed in the future. Upon completion, it will be used as the international standard language for e-manufacturing paradigm by replacing the old machine-level language, so called M&G code used since 1950's. With the rich information contents included in the new language, various intelligent functions can be made by the CNC as the CNC knows what-to-make and how-to-make. In particular, On-Machine Inspection required for quality assurance in the machine level, can be done based on the information of feature­based tolerance graph. Previously, On-Machine inspection has been investigated mainly for milling operation, and only a few researches were made for turning operation without addressing the data model. In this thesis, we present a feature-based on-machine inspection process by the 4 Tasks: 1) proposing a new schema for STEP-NC data model, 2) converting the conventional tolerance scheme into that of STEP-NC, 3) modifying the tolerance graph such that the tolerance can be effectively measured by the touch probe on the machine, and 4) generating collision-free tool path for actual measurement. Task 1 is required for the incorporation of the presented method in the ISO 14649, whose current version does not much include the detailed schema for tolerance. Based on the presented schema, the tolerance represented in the conventional drafting can be changed to that of STEP-NC (Task 2). A special emphasis was given to Task 3 to make the represented tolerance accurately measurable by the touch probe on the machine even if the part setup is changed. Finally, Task 4 is converting the result of Task into the motion of touch probe. The developed schema and algorithms were illustrated by several examples including that of ISO 14649 Part 12.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권2호
• /
• pp.628-646
• /
• 2016

This paper proposes a novel channel assignment scheme that is based on finite projective plane (FPP) theory. The proposed scheme involves using a Markov chain model to allocate N channels to N users through intermixed channel group arrangements, particularly when channel resources are idle because of inefficient use. The intermixed FPP-based channel group arrangements successfully related Markov chain modeling to punch through ratio formulations proposed in this study, ensuring fair resource use among users. The simulation results for the proposed FPP scheme clearly revealed that the defined throughput increased, particularly under light traffic load conditions. Nevertheless, if the proposed scheme is combined with successive interference cancellation techniques, considerably higher throughput is predicted, even under heavy traffic load conditions.

• 한국ITS학회 논문지
• /
• 제14권1호
• /
• pp.57-67
• /
• 2015

무선 메쉬 네트워크에서 다중경로 라우팅 프로토콜은 QoS 충족 또는 링크 단절에 대한 강건성 확보를 위한 해결책으로 자주 사용되어 왔으며, 무선 전술통신 및 재난구조 통신에서는 QoS와 강건성을 동시에 충족시키는 방법에 대한 필요성이 강조되고 있다. 본 논문에서 제안하는 라우팅 프로토콜은 OFDM-TDMA collision-free MAC을 기반으로 on-demand 방식으로 대역폭 및 지연시간 제한을 포함하는 사용자의 세션별 QoS 요구사항을 충족시켜 줄 수 있는 다중경로들을 탐색 및 관리하고, 전송실패가 발생할 경우 경로 재탐색 이전에 대체경로를 선택하여 데이터를 재전송하도록 함으로써 지연 및 수용능력 간 트레이드오프를 완화하는 동시에 강건성을 증가시킨다. 본 논문에서는 시뮬레이션을 통해 제안하는 프로토콜의 성능을 분석하여 제안하는 프로토콜이 QoS 보장 측면과 데이터의 전송성공률 측면에서 우수을 보인다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.197-205
• /
• 2007

Radio frequency identification, or RFID, is a generic term for technologies that use radio wave to automatically identify people or objects. UHF RFID technology is used for everything from tracking goods within their supply chain, working in process and for other applications. If RFID is applied in wheel scanner that is a important equipment to measure a diameter, width, height of wheel, efficiency in maintenance will be improved because of checking data in real-time. In domestic technology, capacity of wheel scanner technology as well as RFID are less good than foreign goods there a up to current day a point of read range, anti-collision, a tolerance. Therefore, sturdy on the development of wheel scanner using RFID technology to measure wheel in maintenance of rolling stock was carried out in this paper.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.310-316
• /
• 2017

The robot proximity and tactile sensors can be categorized into two groups: grip sensors and safety sensors. They have different performance requirements. The safety sensor should have long proximity range and fast response in order to secure enough response time before colliding with ambient objects. As for the tactile sensing function, the safety sensor need to be fast and compliant to mitigate the impact from a collision. In order to meet these requirements, we proposed and demonstrated a compliant integrated safety sensor suitable to human-friendly robots. An ultrasonic proximity sensor and a piezoelectric tactile sensor made of PVDF films have been integrated in a compliant PDMS structure. The implemented sensor demonstrated the maximum proximity range of 35 cm. The directional tolerance for 30 cm detection range was about ${\pm}15^{\circ}$ from the normal axis. The integrated PVDF tactile sensor was able to detect various impacts of up to 20 N in a controlled experimental setup.

• 한국CDE학회논문집
• /
• 제9권1호
• /
• pp.35-43
• /
• 2004

It is well known that the five-axis machining has advantages of tool accessibility and machined surface quality when compared with conventional three-axis machining. Traditional researches on the five-axis tool-path generation have addressed interferences such as cutter gouging, collision, machine kinematics and optimization of a CL(cutter location) or a cutter position. In the paper it is presented that optimal CL data for a face-milling cutter moving on a tool-path are obtained by incorporating TSS(tool swept surface) model. The TSS model from current CL position to the next CL position is constructed based on machine kinematics as well as cutter geometry, with which the deviation from the design surface can be computed. Then the next CC(cutter-contact) point should be adjusted such that the deviation conforms to given machining tolerance value. The proposed algorithm was implemented and applied to a marine propeller machining, which proved effective from a quantitative point of view. In addition, the algorithm using the TSS can also be applied to avoid cutter convex interferences in general three-axis NC machining.

• 디지털융복합연구
• /
• 제13권1호
• /
• pp.283-288
• /
• 2015

일회용 패스워드는 정적인 패스워드 사용에 따른 위험을 해결하고 사용자 인증을 강화하기 위해 필요하다. 개인정보 유출에 따른 사용자를 인증을 강화하기 위해 OTP 생성 알고리즘이 중요시 되고 있다. 본 논문에서 제안하는 OTP 생성 알고리즘은 Seed값과 Time값을 이용하여 256비트 크기의 OTP Data를 생성하게 된다. 생성한 OTP Data를 행렬로 나열하고 불규칙적으로 32비트의 값을 추출하게 되는 이 값이 최종적인 OTP값이 된다. OTP 생성 횟수가 많을수록 제안하는 알고리즘이 기존 알고리즘에 비해 충돌내성의 확률이 낮음을 알 수 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1610-1615
• /
• 2007

This paper presents a characteristics of linear induction motor considering airgap variation for railway transit in order to achieve high performance of the vehicle. The operating principle of a LIM(Linear induction motor) is identical to a rotary induction motor. Space-time variant magnetic fields are generated by the primary part across the airgap and induce the electro-motive force(EMF) in the secondary part, a conducting sheet. This EMF generates the eddy currents, which interact with the airgap flux and so produce the thrust force known as Loren's force. Even though the operating principal is exactly same as a rotary motor, the linear motor has a finite length of the primary or secondary parts and it causes static and dynamic end-effect which is the discontinuous airgap flux phenomenon. This end-effect causes the deterioration of the system performance, especially in high-speed operation. Another problem is that construction tolerance restricts the minimum airgap in order to prevent a collision between the primary part and the secondary reaction plate. More over, as the airgap length is getting smaller, the attraction force between the primary part and secondary parts is getting larger dramatically and the attraction force would be another friction against propulsion. Therefore, it is necessary to figure out the characteristics of linear induction motor considering airgap variation in order to achieve high performance of the vehicle. The dynamic model of LIM taking into account end-effects is derived. Then the modified mechanical load equation considering the effect of the attraction and thrust force according to the airgap variation is analyzed. The simulation results are presented to show the effect of the LIM according to the airgap variation.