• 한국광학회:학술대회논문집
• /
• 한국광학회 1999년도 제16회 광학 및 양자전자 학술발표회Proceedings of 16th Optics and Quantum Electronics Conference, 1999
• /
• pp.126-127
• /
• 1999

• 한국광학회지
• /
• 제11권4호
• /
• pp.232-238
• /
• 2000

백색 시준광의 시준 정도로 정밀하게 측정하기 위하여 두 직선격자나 원형격자에 의한 버니어(vernier) 무아레 무늬를 이용하는 새로운 시준 방법을 제안하였다. 버니아 무아레 무늬의 피치 간격을 측정함으로써 렌즈의 초점 종이동 오차($\Deltaf$), 발산각($\theta$) 및 종색수차 $(L_{ch})$ 를 구하였다. 초점 길이가 120.0mm이고 F/2.4인 렌즈를 사용하여 측정한 결과 $\Deltaf$=2.19mm이고 $\theta$=mm이고 F/1.6 그리고 아베수가 64.1인 렌즈의 종색수차를 버니어 무아레 무늬를 이용하여 측정하였다. 자동초점방법을 이용하여 측정한 결과,$L_{ch}=1.58mm(\pm0.01mm)$와 무아레 간섭법을 이용하여 측정한 결과인 1.59mm($\pm$0.1mm)와 거의 일치함을 알 수 있었다.

• 한국광학회지
• /
• 제3권1호
• /
• pp.16-19
• /
• 1992

회절격자와 굴절률을 알고있는 액체내에 있는 렌즈사이의 퓨리에 변환관계를 이용하여 렌즈 굴절률에 대한 수식을 유도하였다. 층밀리기 간섭기술을 이용하여 정확한 렌즈의 후면촛평면의 위치를 결정하였으며 슬릿을 스텝핑 모터로 구동하는 이동장치에 부착시켜 회절격자의 퓨리에 변환 스펙트럼 간격을 축정하였다. 세가지 액체를 사용하여 얇은 렌즈의 굴절률을 측정하였으며 높은 측정정확도를 확인하였다.

• 한국정밀공학회지
• /
• 제25권12호
• /
• pp.39-46
• /
• 2008

Asymmetric glass lens core for portable projection optic system was designed and simulated. And it was machined by newly developed non-rotational ultra precision grinding method. With the designed lens data which optimized for multi-collimation, we generated the we core surface data. Mold pressing conditions analyzed by FEM. In the machining process, ground profile errors were compensated based on measured data, minimized feed rate and depth of cut. The deviations of machined core profile were acceptable level for glass mold press. Mold pressed glass array lens was coated with $SiO_2\;and\;Ta_2O_5$ for anti-reflection.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권2호
• /
• pp.14-19
• /
• 2007

Angle sensors based on the principle of autocollimation, which are usually called autocollimators, can accurately measure small tilt angles of a light-reflecting flat surface. This paper describes a prototype micro-angle sensor that is based on the laser autocollimation technique. The new angle sensor is compact and consists of a laser diode as the light source and a quadrant photodiode as a position-sensing device. Because of its concise design, the microangle sensor facilitates dynamic measurements of the angular error motions of a precision stage without influencing the original dynamic properties of the stage. This is because the sensor only requires a small extra target mirror to be mounted on the stage. The sensitivity of the angle detection is independent of the focal length of the objective lens; therefore, an objective lens with a relatively short focal length is employed to reduce the size of the device. The micro-angle sensor uses a single lens for the both the laser collimation and focusing, which distinguishes it from the conventional laser autocollimation method that has separate collimate and objective lenses. The new micro-angle sensor has dimensions of $15.1\times22.0\times14.0mm$ and its resolution is better than 0.1 arc-second The optical design and performance of this micro-angle sensor were verified by experimental results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.51-54
• /
• 2000

The traditional surface measuring method using confocal principle requires much time to measure an object surface since it is a scanning tool. In this paper, the upgraded confocal microscope is introduced. It is also a scanning tool but it requires 2D-scanning while the traditional one requires 3D-scanning. It means the time for measuring is considerably reduced. In addition, the measuring system is configured to increase the efficiency of beam. He-Ne laser whose frequency is 632.8nm is used for the laser source. An example of measuring result through the upgraded confocal microscope is showed.

• 비파괴검사학회지
• /
• 제21권2호
• /
• pp.169-176
• /
• 2001

근대 산업에서 기계 부품들의 정밀도와 표면 마무리 조건은 그 어느 때보다 더 절박하게 요구되고 있는 가운데, 표면 형상의 측정과 이해는 공학 기술자뿐만 아니라 물리학자나 화학자도 논은 관심을 갖게 되었다. 이런 상황에서 광학적 측정 방법은 opto-mechatronics의 이점을 가지고 진동 측정이나 균열, 결함의 검출 등의 분야에서 유용한 측정 방법으로 사용되고 있고, 표면 형상학의 분야에서 다시 한 번 중요한 역할을 할 것으로 기대를 받고 있다. 본 연구에서는 공초점 현미경의 원리에 대해 서술하였고, 기존의 스캔 방식 공초점 현미경보다 한 차원 개선된 3차원 표면형상 측정 시스템을 개발하였다. 그리고, 표면의 기하적인 형상에 대한 정보를 얻고 그 형상을 가시화하기 위해 컴퓨터 시스템과 통합하고 그에 필요한 소프트웨어를 개발하였다.

• Nuclear Engineering and Technology
• /
• 제41권1호
• /
• pp.135-142
• /
• 2009

In this investigation, we prepared a 1 and 3-parallel serpentine single PEMFC, which has an active area of $100\;cm^2$ and a flow channel cross section of $1{\times}1mm$. Distribution and transport of water in a non-operating PEMFC were observed by varying flow types and the flow rates (250, 400, and 850 cc/min). This investigation was performed at the neutron imaging facility at the CO1d Neutron RAdiography facility (CONRAD), HMI, Germany of which the collimation ratio and neutron fluence rate are 250, $1{\times}10^{6}n/s/cm^2$, respectively. The neutron image was continuously recorded by a scintillator and lens-CCD coupled detector system every 10 seconds. It has been observed that although the distilled water was supplied into the cathode channel only, the neutron image showed a water movement from the cathode to the anode channel. The water at the cathode channel was completely discharged as soon as the pressurized air was supplied. But the water at the anode channel was not easily removed by the pressurized air except for the 3-parallel serpentine type with 850cc/min of air flow rate. Moreover, the water at the MEA wasn't removed for any of the cases.