• 한국유체기계학회 논문집
• /
• 제13권2호
• /
• pp.54-58
• /
• 2010

The most recent, Vacuum Pipeline for Waste Collecting System, to collect MSW(Municipal Solid Waste) efficiently, is used environmental preservative, to emit less air pollution, in New City. However, it is difficult to monitor broken pipe and filled mass of Waste, because Vacuum Pipeline is laid underground. Therefore, FBG, optical fiber sensor, is used to inspect the temperature change and longitudinal strain to take proper action for unusual situation. I have need to accumlate sensor data of district control. I hope to be used Vacuum Pipeline more than 30 years in New City.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.381-385
• /
• 2009

This paper describes performance characteristics of a centrifugal fan having a different volute casing. The centrifugal fan has a backward blade type, and is used in a refuse collecting system. The flow characteristics inside the components are analyzed by three-dimensional Navier-Stokes analysis, and also compared to the results by experiments. Distributions of pressure and efficiency obtained by numerical simulation has a good agreement with the experimental results. Throughout the numerical simulation of the centrifugal fan, a fan efficiency is increased by decreasing local losses in the blade passage. It is found that the fan efficiency is enhanced by decreasing the distance between the shroud of a impeller and casing. Detailed flow analysis is also analyzed and discussed using the results obtained by numerical simulation.

• Journal of Mechanical Science and Technology
• /
• 제14권12호
• /
• pp.1403-1411
• /
• 2000

Heat losses from the receivers for a dish-type solar energy collecting system constructed at Korea Institute of Energy Research are analyzed. The Stine and McDonald's model is used to estimate the convection loss. The Net Radiation method and the Monte-Carlo method are used to calculate the radiation heat transfer rate from the inside surface of the receiver to the surroundings. Two different receivers are suggested here and the performances of the receivers are estimated and compared with each other based on the prediction of the amount of heat losses from the receivers. The effects of the receiver shape and the radiation properties of the surface on the thermal performance are investigated. The performance of Receiver I is better than that of Receiver II, and the amount of solar irradiation that is not captured by the captured by the receiver after being reflected by the concentrator becomes significant if the temperature of the working fluid is low.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.955-956
• /
• 2013

최근 블로그, 카페 및 SNS(Social Network Service)와 같이 다양한 소셜 네트워크 환경을 통해 사용자 자신의 의견 등을 표현하고 있다. 이에 이러한 데이터를 수집 분석하는 시스템을 개발하는 업체에서는 소셜 네트워크 상의 정보를 수집하여 데이터의 패턴을 분석하여 마케팅 등에 이용하는 기술을 제안하고 있다. 그러나, 기존 기술에서는 소셜 네트워크 상에 존재하는 다양한 유형의 문서나 정보를 모두 수용할 수 없어서 그 분석에 제한이 있다. 본 논문에서는 이러한 문제점을 해결하기 위해 소셜 네트워크 정보를 실시간으로 수집 및 분석함에 있어서, 소셜 네트워크상에 존재하는 다양한 유형의 문서나 정보를 모두 수용할 수 있고, 이용자의 필요에 따라 분석 결과를 제공할 수 있는 소셜 네트워크 정보 수집 및 분석 시스템을 제공하고자 한다.

• 한국태양에너지학회 논문집
• /
• 제31권1호
• /
• pp.44-50
• /
• 2011

The solar radiation, inner temperature of the tilted box and the amount of condensed water were measured to find the most effective purified water production system. The inner temperature of the tilted box was related with solar radiation that was affected by sunshine and cloud. With analyzing those relationships of the solar radiation, inner box temperature, the angle of tilted boxes and amounts of water condensation optimal collecting system area could be calculated.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.724-729
• /
• 2005

Winter weather condition can cause icing and ice coats on 25 kV overhead contact wire. This generates shocks at the mechanical interface of the collecting strips of the pantograph and the contact wire and extra electrical resistance, which may affect quality of current collection at the contact wire / collecting strips of pantograph interface. De-icing operations should he performed just before train operation to avoid the formation of another ice layer. Thus, the work in this paper is investigation and analysis of de-icing system which could be applied to the electric car line of railways.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.15-21
• /
• 2003

Generally, subway runs under the ground, so it uses rigid contact wire. Pantograph and contact wire, they have effect on the contact force each other. This paper is on the dynamic interaction of a pantograph and rigid contact wire system. For this we developed simulation program of current collecting capability for dynamic interaction for pantograph and rigid contact wire. As a result, we got contact force and displacement between pantograph and rigid contact wire. This paper shows the possibility of better pantograph's suspension design and better maintaining of current collecting capability than present when suspention of pantograph is developed by theoretic result.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.305-307
• /
• 2005

In the cold and temperate regions of Korea the icing and ice coats on 25[kV] electric car line during winter is a very serious problem. This generates shocks at the mechanical interface of the collecting strips of the pantograph and the contact wire and extra electrical resistance, which may affect quality of current collection at the contact wire / collecting strips of pantograph interface. De-icing operations should be performed just before train operation to avoid the formation of another ice layer. This paper presents temperature analysis of the de-icing system which could be applied to the electric car line of railways.

• 한국잠사곤충학회지
• /
• 제48권1호
• /
• pp.28-31
• /
• 2006

효율적으로 누에똥을 수집할 수 있는 사육장치 및 수집기를 개발하기 위하여 본 연구를 수행하였다. 1. 사육장치 무게를 경량화하고 조립식 및 바퀴를 부착하여 급상 및 수집작업시 편리성을 제고하였다. 2. 누에자리망 크기별 수집량은 7.0*7.0 mm망 이용시 5.0*5.0 mm 대비 36% 많았으나, 떨어지는 누에가 5령 사육기간 동안 다소(0.3%) 있었다. 3. 누에 수거기를 이용한 수집노력은 수작업 대비 37%의 절감효과가 있었다. 4. 상자당 누에똥 수집량은 2단 사육시 19.7kg의 잠분이 수집되었다. 5. 노동투하시간(시간/상자)은 현행(손수집) 대비 개선(수집기)이 65%수준으로 35%의 노력절감이 있었고 노동생산성(kg/시간)은 55% 증가하였다. 6. 생산비에서도 현행 대비 개선이 35.9% 비용절감이 있었다. 7 누에수거 및 누에통수거시 흡입구 조절할 수 있도록 제작하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2001년도 학술발표회 논문집(II)
• /
• pp.679-684
• /
• 2001