• Speech Sciences
• /
• v.7 no.1
• /
• pp.5-15
• /
• 2000

In this paper a detailed description of collecting Korean audio-video speech data is presented. The main aim of this experiment is to collect some audio-video materials which can be used for later experiments to estimate and model the actions of the visible human articulatory organs such as mouth, lips and jaw. We collect audio-video data from seven directions separately. Twelve markers are used to trace the movements.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.35.3-35
• /
• 2001

Developed is an optical auto-inspection system to detect some microscopic defects on the Inside surface of the hydraulic automobile brakes at the production line. A small cylindrical detection module with a solid laser source at its center has two rings of optical fibers to separately collect light reflected and scattered from the defects on the surface. The cylindrical brake part rotates with respect to the detection module that will move parallel to the rotational axis of the cylinder. Thus, the optical module can scan the whole inside surface area. The automatic detection of the defects is to compare the intensity distributions ...

• Journal of Biomedical Engineering Research
• /
• v.14 no.1
• /
• pp.81-88
• /
• 1993

This paper is the study of the reflectance of light from biological tissue for red and Infrared wavelengths and relates the acquired reflectance data to expected physiological changes within the skin and muscle layers associated with heat and exercise. The instrument was disigned to collect data from the calf muscle in human subjects with probe located at the surface of skin. Rapid data acquisition method allowed monitoring of rapid changes in reflecttance due to a stimulus. This study demonstrates that changes in O2 saturation and blood fractional volume expected within the dermis and muscle layers were asserted by examining the slopes of the plotted index for heat and exercise. The results presented in thls study support the claim that reflectance can separately discriminate between changes of blood volume and oxygenation in muscle and in skin. The data demonstrate the ability to measure consistent changes In tissue optical properties during exercise and heat.

• Wind and Structures
• /
• v.4 no.2
• /
• pp.131-146
• /
• 2001

A full-scale synchronized data acquisition system was set up on the roof of the experimental building at the Texas Tech University Wind Engineering Research Field Laboratory to simultaneously collect approaching wind data, conical vortex images, and roof corner suction pressure data. One-second conditional sampling technique has been applied in the data analysis, which makes it possible to separately evaluate the influencing effects of the horizontal wind angle of attack, ${\theta}$, and the vertical wind angle of attack, ${\varphi}$. Results show a clear cause-and-effect relationship between the incident wind, conical vortices, and the induced roof-corner high-suction pressures. The horizontal wind angle of attack, ${\theta}$, is shown to be the most significant factor in influencing the overall vortex structure and the suction pressures beneath. It is further revealed that the vertical wind angle of attack, ${\varphi}$, plays a critical role in generating the instantaneous peak suction pressures near the roof corner.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.01a
• /
• pp.165-166
• /
• 2020

산업화 이후 무분별한 자원 개발로 인해 쓰레기 배출량은 증가하였으나 그 양을 감당할 쓰레기통의 개수는 부족하다. 그리고 쓰레기통이 있음에도 불구하고 시민의식 부족으로 인해 일반 쓰레기와 재활용쓰레기가 같이 버려져 있는 상태를 흔히 볼 수 있다. 작은 예로 자취하고 있는 대학생들 자취방 앞이나 상가 건물 앞에 분류되지 않고 아무렇게나 버려져있는 쓰레기들을 많이 볼 수 있다. 이는 환경 미화원이 직접 재분류를 하고 청소하는데 시간과 인력 비용이 낭비하게 된다. 본 논문은 이러한 문제점들을 개선하고 보완하고자 쓰레기를 자동으로 분리수거할 수 있는 '자동 분리수거가 가능한 쓰레기통'기술을 제안한다. 이는 분리수거율을 증가시키고 분리수거 다시 할 불필요한 시간과 인력과 예산을 줄일 수 있고 재활용된 자원을 사용하여 생산 자원을 줄여 원가 절감효과와 에너지 소비를 줄일 수 있다. 이로 인해 자원을 생산할 때 발생하는 탄소와 온실가스 방출량을 감소시켜 지구 온난화를 예방할 수 있다.

• Journal of Environmental Health Sciences
• /
• v.44 no.1
• /
• pp.24-30
• /
• 2018

Objectives: Based on the amount of amalgam, the duration of exposure, and the water pH, this study aims to investigate the change patterns in the mercury concentrations in water after amalgams have been introduced into sewage water. It is expected that the study results will be useful in improving the system for regulating the amount of mercury that is introduced into the environment. Methods: During the study, a glass test-tube with a cap was washed and disinfected using the glass laboratory device washing method. Then, 1, 2, 3, and 4 tabs were placed into a 10 mL pH 4 solution and 10 mL pH 7 distilled water. Each specimen was prepared in duplicate. The mean of the two mercury concentrations was used as the representative value, and the mercury concentration was measured using a mercury measurement device (DMA-80, Milestone, Italy) a total of eight times at one-week intervals. Results: The results show that the lower was the pH, the higher was the amount of amalgam. Also the longer was the duration, the more significant was the increase of mercury concentration in the water. Conclusions: Dental clinics are collected separately from dental clinics that used them. Given this, dental clinics in Korea must have the necessary facilities to separately collect mercury at their level. In addition, proper disposal systems and social attention to the proper management of dental wastes are required to prevent environmental pollution from mercury.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.1
• /
• pp.59-67
• /
• 2018

In this paper, the test facility for coaxial propellers at low Reynolds developed and validated by measured data. The test equipment was designed to measure the hovering performance of propellers according to distances between the upper/lower propellers. Thrust, torque, rotational speed, vibration, and amperage of upper and lower propellers can be measured separately. The data acquisition system was built to collect signals of sensors, and LabVIEW software was used to control the motor and collect the signal. The hover performance tests of single propellers were preceded for the facility validation, and then the performance values of coaxial propellers were measured according to distances and diameter differences between the upper/lower propellers. The results showed that the high efficiency is achieved at 20%~30% distance between the upper propeller and lower one. The configuration that the upper propeller has shorter diameter than the lower one has the highest efficiency than other configuration.

• 한국정보교육학회:학술대회논문집
• /
• 2021.08a
• /
• pp.247-252
• /
• 2021

The quality growth of online education triggered by remote education platforms such as Coursera and edX has increased the demand for lifelong education through online platforms. In response, South Korea has also created various lifelong education support systems and sites in government agencies and local governments. Each support system and web sites created its own member information collection system. The systematic collection and utilization of learners' information requires an integrated member management system of each system. Therefore, the current status of member information collection of state-level lifelong education support systems was analyzed. Based on this, it distinguishes between member information that systems collect in common and information that they collect separately. It will help to bridge the items underlying the integrated membership framework.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.4
• /
• pp.179-188
• /
• 2014

Social overhead capital (SOC) facilities are being threatened continuously by abnormal climate events that are increasing globally. For disaster response, rapid decision making on evacuation routes and other matters is critical. For this purpose, spatiotemporal information that combine data on disasters and SOC facilities needs to be utilized. This information is separately collected by government agencies and public organizations, and is not managed in an integrated manner. For rapid disaster response, an integrated management of separately collected disaster data and the creation of such information as the safety and damages on SOC facilities are required. To achieve this goal, it is essential to build inventories that integrate all the related information to support decision making indispensable for disaster response. In this study, a development plan for an integrated inventory management system based on the management and connection of inventories to support rapid decision making for disaster response is proposed. This system can collect and standardize data related to disasters and SOC facilities that are being managed separately and provide integrated information in line with the needs of users. The proposed system can be used as a decision making tool for proactive disaster response.

• Journal of the Korean housing association
• /
• v.26 no.4
• /
• pp.55-62
• /
• 2015

The international concern on the inhalable fine dust is continuing to increase. In addition to the toxic properties of the fine dust itself, it can be more dangerous than other environmental factors since the dust pollution is hard to be detected by human sense. Although the information on outdoor air condition can be acquired easily, the indoor dust concentration is another problem because the indoor air condition is influenced by the architectural environment and human activity. It means occupants may be exposed to indoor dust pollution over a long period without being aware. Therefore the indoor dust concentration should be measured separately and visualized as an intuitive information. By visualizing, the indoor dust concentration in each space can be recognized practically in compare with the degree of pollution in adjacent spaces. Besides the visualization outcome can be used as base data for related research such as an analysis of the relation between indoor dust concentration and architectural environment. Meanwhile, with the development of network and micro sensing devices, it became possible to collect wide range of indoor environment data. In this regards, this paper suggests a system for visualization of indoor dust concentration and demonstrates it on an actual space.