• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.419-424
• /
• 2001

The purpose of this study is comparing cold expansion method with interference fit. Cold expansion method and interference fit of fastener hole is using in the aerospace industry. These treatment lead to an improvement of fatigue life to the compressive residual stresses developed on the hole surface. But Research is nothing to about difference effect of between cold expansion method and interference fit. So In this paper, It is shown that Comparing cold expansion method with interference fit. and It is further shown that residual stress distribution according to plate thickness.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.470-474
• /
• 2000

Cold expansion of fastener holes is a mechanical process widely used in the aerospace industry. This treatment leads to an improvement of fatigue behavior due to the developed compressive residual stresses on the hole surface. The residual stress profile depends on the parameters of cold expansion, which are, expanding rate, inserting direction of mandrel, material properties etc. and the method to confirm this profile is only measurement by X-ray diffractometer. Despite its importance to aerospace industries, little attention has been devoted to the accurate modelling of the process. In this paper, Two-dimensional axisymmetric finite element simulations have been conducted for the cold expansion in an aluminium plate in order to predict the magnitude and distribution of the residual stress and plastic deformation. Maximum compressive residual stress could be increase about 7 percent using the 2-step cold expansion method.

• 한국육종학회지
• /
• 제41권2호
• /
• pp.73-83
• /
• 2009

To investigate genes related to vernalization and cold- resistance in barley (Hordeum vulgare L. cv. Nagaoka), differentially expressed genes were identified from cold-resistant barley leaves with suppression subtractive hybridization (SSH) and Northern blot analyses. The nucleotide and the deduced amino acid sequences of the putative gene products were compared. The bvrn-7 showed high homology(84%) with gene related to vernalization, and the bvrn-3, bvrn-12, bvrn-28, bvrn-29 and bvrn-36 related to cold-resistant genes had high identity of 88~98% with low temperature-induced genes. The results indicate that the 6 genes were closely related to vernalization and cold-resistance during low temperature treatment.

• 소성∙가공
• /
• 제20권2호
• /
• pp.140-145
• /
• 2011

The aim of the present study is to derive optimized post heat treatment temperatures to get a proper formability for Ti/STS409L/Ti clad materials. These clad materials were fabricated by cold rolling followed by a post heat treatment process for 10 minutes at temperatures ranging from $500^{\circ}C$ to $850^{\circ}C$. The microstructure of the interface was observed using a Scanning Electron Microscope(SEM) and an Energy Dispersive X-ray Analyser(EDX) in order to investigate the effects of post heat treatment on the bonding properties of the Ti/STS409L/Ti clad materials. Diffusion bonding was observed at the interfaces with a diffusion layer thickness increasing with the post heat treatment temperature. The diffusion layer was composed of a type of(${\varepsilon}+{\zeta}$) intermetallic compound containing additional elements, namely, Fe, Ti and Ni. The micro Knoop hardness of the Ti/STS409L interfaces was found to increase with heat treatment up to $800^{\circ}C$ and then decrease for temperatures rising up to $850^{\circ}C$. The tensile strength was shown to decrease for heat treatment temperature increasing to $750^{\circ}C$ and then increase rapidly for temperature rising up to $850^{\circ}C$. A post heat treatment temperature range of $700{\sim}750^{\circ}C$ was found to optimize the formability of Ti/STS409L/Ti clad materials.

• 대한한방내과학회지
• /
• 제11권1호
• /
• pp.1-13
• /
• 1990

We objerved the following results from The Yellow Emperior's Canon of Internal medicine through the investigation of literature about fever. 1. Fever is divieded two type asthenic fever sthenic heat and It accused two type of excess of Yang-exoganous heat, deficiency of Yin-internal fever 2. The cause of fever is divieded three type, exoganous cause, internal cause non-exoganouse and internal cause Among the cause of fever Exoganous cause is almost affected by cold-evil Internal cause is affected by deficiency of Yin and seven emotion caused by having sex after intoxigation or over-exertion, and non-exoganous and internal cause bring about the difference of a personal life and food and drink 3. The sympton produced by fever is appeared differently through-pulse and meridian and they are indication of Diagnosis 4. The theory of treatment about fever are as follows Drinking cold-water Practising acupuncture Trerating hot-evil by cold Dispel cold by warm Treating cold-evil by heat Promote vital energy circulation by cold Treating warm-evil by cold Promating circulation by cold Treating cold-evil by warm Promoting circulation by heat.

• 소성∙가공
• /
• 제15권8호
• /
• pp.603-608
• /
• 2006

The main purpose of the present study has been placed on investigating the mechanical properties and microstructures of C-Si-Mn-V steels for cold forming manufactured by controlled rolling and cooling technology. The steels were manufactured in electric arc furnace (EAF) and casted to $160{\times}160mm$ billet. The billets were reheated in walking beam furnace and rolled to coil, the stocks were rolled by Controlled Rolling and Cooling Technology (CRCT), so rolled at low temperature by water spraying applied in rolling stage and acceleratly cooled before coiling. Rolled coils were cold drawed to the degree of 16%, 27% of area reduction respectively without heat treatment. Microstructual observation, tensile test, compression test and charpy impact tests were conducted. The mechanical properties of the steels were changed by area reduction of cold drawing and it is founded that there are optimum level of cold drawing to minimize compression stress for these steels. From the result of this study, it is conformed that $80kg_{f}/mm^{2},\;90kg_{f}/mm^{2}$ grade high strength microalloyed steel for cold forming are developed by accelerated cooling and optimum cold drawing.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.321-324
• /
• 2005

The main purpose of the present study has been placed on investigating the effects of controlled rolling and cooling on the microstructures and mechanical properties of C-Si-Mn-V steels for cold forming. The steels were manufactured in vacuum induction melting(VIM) furnace and casted to 1.1ton Ingots and the ingots were forged to $\Box150$ billet. The forged billets were reheated in walking beam furnace and rolled to coil, the stocks were rolled by Controlled Rolling and Cooling Technology (CRCT), so rolled at low temperature by water spraying applied in rolling stage and acceleratly cooled before coiling. Rolled coils were cold drawed to the degree of $27\%$ of area reduction without heat treatment. Microstructual observation, tensile test, compression test and charpy impact tests were conducted. The mechanical properties of the steels were changed by area reduction of cold drawing and it is founded that there are optimum level of cold drawing to minimize compression stress for these steels. From the result of this study, it is conformed that mechanical properties and microstructure of C-Si-Mn-V steels for cold forming were enhanced by accelerated cooling and founded optimum level of cold drawing.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.80-85
• /
• 2003

This research represents enhancement of forgeability of SNCM522H steel. Output Shaft (OP Shaft) has been used as a subject for the study. OP Shaft is used as component of power train for automobiles. To develop I pass cold forging process instead of existing 2 pass process for OP Shaft, studies in terms of process design and heat treatment were performed. To verify the new process, CAE simulations were performed. And hardness test, microstructural analysis and tensile tests after heat treatment were carried out to evaluate the validity of proposed heat treatment cycle. The 2 pass forging process could be reduced as 1 pass process through improvement of process and heat treatment cycle.

• 소성∙가공
• /
• 제11권5호
• /
• pp.388-393
• /
• 2002

Heat-treatment-free steels have been replacing for conventional quenched-and-tempered structural steels since the microalloyed forging steel was developed in early 1970s in Germany. Substantial cost reduction provides the driving force for this change. As a result of intensive R & D efforts and application trials, various kinds of grades, for example heat-treatment-free steels for hot forging, machining and cold heading, have been developed and moreover these steels are in tonnage production throughout the world. The developments in alloy steels, processing conditions and structure-property characteristics of the heat-treatment-free steels, are described and also recent trend and future prospect are summarized in this report.

• 한국응용곤충학회지
• /
• 제60권2호
• /
• pp.193-199
• /
• 2021

벌목 개미과의 일본열마디개미는 국내 토착종이다. 지금까지 야외에서 이 종의 월동기작을 이해하기 위한 내한성 연구는 진행되지 않았다. 저온에서 다양한 온도별 노출시간에 따른 발육태별 저온 저항성을 조사하였다. 성충인 일개미가 다른 발육태와 비교하여 5℃와 10℃의 저온에서 높은 생존율을 보였으며, 급속내한성 유기 조건인 15℃에서 12시간 노출 후 내한성을 획득하였다. 급속내한성 유기는 10℃에서 최대 44%까지 생존율이 향상되었으며, 체내과냉각점과 체내빙점은 각각 -10.0℃에서 -14.2℃, -11.3℃에서 -15.3℃까지 낮아졌다. 저온처리는 저온 또는 스트레스 관련 유전자인 글리세롤 인산화효소와 열충격 단백질의 발현을 증가시켰다. 이상의 결과는 일본열마디개미의 내한성이 급속내한성 유기에 의해 야기된다는 것을 의미한다.