• Journal of Korean Society of Rural Planning
• /
• v.13 no.3
• /
• pp.51-60
• /
• 2007

In terms of the indicators by the type for the landscape plan per the district nit, geographic ecology indicators were the items such as water, water system, topography and climate, while biological ecology indicators were the items such as green zone size, green zone ratio, biotope size and distribution. The sensory and visual indicators were the items such as view point, view axis and skyline, and the accessibility indicator items for the green zone were applied as the socially used indicators. As for the application method according to each indicator, the water or water system was expressed and applied through the slopes and elevation topographic analysis drawings, the climate was expressed and applied through the main direction of the wind and the cold wind pass alley drawings. As for the green zone size and green zone ratio, the land use according to the status and housing area development was compared to present the measured figures. In case of the biotop size and the distribution item, the range was limited to the preparation of the biotope drawings for the focused preservation. As for the view point and view axis, the view point was selected according to the view point to prepare and apply the view analysis drawing in which the view area to be preserved is analyzed. As for the skyline, its landscape photo was composed with the housing area shape, and then skyline photography was applied as the plan in order to propose and consider the various shapes of the skyline. As for the accessibility to the peen zone, the network drawing was drawn to reflect the users' accessibility and continuity of the green zone formed and preserved according to the land use plan and then the drawing was prepared and proposed as the applicable plan.

• Korean Institute of Interior Design Journal
• /
• no.21
• /
• pp.165-172
• /
• 1999

For the useful method capable of modern expression on traditional residence architecture, a study was performed on the methodological establishment and possibility of typological method could be examinated to interior design process by typological method. First of all, through the establishment verbal of our Korean traditional architecture and further investigation of environmental and cultural idealogical facts, it could be extracted from natural instinct, duality, continuance, flexibility and transitiov. In second process, based on these results, it could be framed and described the individual typological language and, for the sake of drawing for visual and spatial typology, it was made by sketch in terms and view of possibile guidance of prototype, transforming and application method. from these results of investigated sketches, it cold be used for criteria of application method as the parts of visual and spatial typological elements to have an applicable expression of it/s traditionality. Based on above facts, for the subjects of spatial system, form & shape system, circulation system, order system, decoration system, color & material system in interior design fields, we cold propose the practical possibility through the consideration of application method for built-in meaning that could be adaptable for the interior design practices. These facts were extracted from the based on visual & spatial typology, as above mentiov. Also, through preparing and suggesting the criteria of evaluation and measurement of design quality , we could propose the applicable methodology for further & basically Korean traditional embodiment.

• Korean Journal of Materials Research
• /
• v.14 no.1
• /
• pp.73-77
• /
• 2004

The mechanical and electrical properties of $Cu-TiB_2$ composites prepared by hot extrusion and cold drawing according to the variation of $TiB_2$ contents and the size of $TiB_2$ particle have been studied. The experimental results showed that the electrical conductivity was decreased with increasing the $TiB_2$ content, and their tensile strength and hardness increased inversely. In the case of the same content of $TiB_2$ particle, the smaller $TiB_2$ particle, the higher their mechanical properties. The electrical conductivity of $Cu-TiB_2$ composites showed more than 70%IACS. Their yield strength and hardness were more than 120 MPa and HRB 60～70, respectively.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.137-138
• /
• 2009

There is a growing interest to replace the commercial steels with non-heat treated steels, which does not involve the spheroidization and quenching-tempering treatment in the steel-wire industry production. However, non-heat treated steels should satisfy high strength and good formability without performing heat treatment. Therefore, it is important to investigate optimum materials showing a good combination of strength and formability after the cold drawing process. In this presentation, non-heat treated steel wire rod produced by POSCO will be introduced and discussed on detail technical concepts.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.64-67
• /
• 2003

Poly(trimethylene terephthalate)(이하 PTT)는 1941년 Caligo Printing Ink사의 Whinfield와 Dickson에 의해 중합 방법이 보고[1]된 이후 상업화를 위한 많은 학문적 연구가 이어져왔다. 그럼에도 불구하고 아직 PET에 비하여 기초 연구가 미비하며 상업적으로 사용하기에는 많은 불안정한 요소들을 가지고 있다. 앞선 연구자들이 밝힌바와 같이 PTT의 결정구조는 2개의 단량체가 1개의 unit cell을 이루면서 결정격자 내에서 O-C $H_2$-C $H_2$-C $H_2$-O가 trans-gauche-gauche-trans형의 coiled spring처럼 형성되어 좋은 elastic recovery와 뛰어난 신축성, 염색성 등 우수한 물성을 가지며 전반적인 성질은 PET와 Nylon의 중간성질을 뛰고 있지만 [2,3] 유리전이온도 (Tg : dir 4$0^{\circ}C$)와 냉결정화오도 ( $T_{ c cold}$ : dir 55$^{\circ}C$)사이의 차이가 15$^{\circ}C$ 정도이므로 섬유상에 많은 경시변화가 일으켜 구조적 불안정성을 가지게 한다 [4]. (중략)

• Applied Microscopy
• /
• v.47 no.3
• /
• pp.86-94
• /
• 2017

In this study, we will describe a new design of carbon nanotubes tip. Single-walled carbon nanotubes produced using high-pressure CO over Fe particles (HiPCO) at CNI, Houston, TX used in this study. These tips were manufactured by employing a drawing technique using glass puller. Field electron microscopies with tips (cathode) to screen (Anode) separation of ~10 mm was used to characterize the electron emitters. The system was evacuated down to base pressure of (${\sim}10^{-8}$ mbar) when baked at up to (${\sim}200^{\circ}C$) over night. An electron field emission patterns, as well as current versus voltage characteristics and Fowler-Nordheim plots, are discussed.

• Transactions of Materials Processing
• /
• v.14 no.7 s.79
• /
• pp.613-618
• /
• 2005

The paper is concerned with the process design and the die design for manufacturing the preform of a large pressure vessel. The cold-working processes are introduced to improve the fatigue strength and to simplify the manufacturing process. By the finite element simulation, the parameter design is carried out, which is subjected to constraints such as the blank sire, press capacity and other minor limitations. The proposed design results are verified by the model experiments, in which the model is scaled down to one tenth of the original size.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.10a
• /
• pp.131-136
• /
• 2004

Thermal control of satellite propellant tank is achieved by patch heaters enabled by thermostat's behavior. It is important to attach the thermostat on the appropriate position of the propellant tank. However its position cannot be given with exact numerics because tank is spherical. Actually the position for thermostat is designated in relevant drawing approximately, therby, the engineer practices depending on his own experience and intuition. The sensitivity analysis for the position of thermostat is performed such that the influence on the thermal behavior and control of tank is examined quantatively. When assembling tank module, the reasonable performance on the thermal control is believed with possible human errors if the uncertainty in the position of thermostat is not quite large.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.983-987
• /
• 2001

This paper deals with an automated computer-aided process planning system by which designer can determine operation sequences even if they have little experience in process planning of wheel bolt products by a multi-stage former. The approach to the system is based on knowledge-based rules and a process knowledge base consisting of design rules is built. Knowledge for the system is formulated from plasticity theories, empirical results and the empirical knowledge of field experts. Programs for the system have been written in AutoLISP for the AutoCAD using a personal computer and are composed of two main modules. An attempt is made to link programs incorporationg a number of expert design rules to form a useful package. Results obtained using the modules enable the designer and manufacturer of wheel bolt product to be more efficient in this field.

• Transactions of Materials Processing
• /
• v.16 no.1 s.91
• /
• pp.67-74
• /
• 2007

This study is aimed to find out the optimal forming conditions by comparing and analyzing material flow, deformation pattern, and a forming load through rigid-plastic FEM for a flange using pipe. Flanges are widely used for various purposes as connectors of industrial steel pipes which are manufactured by drawing process. The forming feature of flange was reviewed through both heading process and radial extrusion process in a cold working condition. As a result of simulation, the shape of flange can not be made by heading process, but made by radial extrusion process. The effects of design factors, such as gap-height, die-comer radius, and frictional factors on maximum forming load and deformation pattern are investigated for radial extrusion process.