Objectives : The aim of this study was to analyze relationship between post-stroke depression (PSD) and cold, heat, deficiency and excess patterns. Methods : Twenty-eight PSD patients were recruited from STROKE center and measured with questionnaires for cold, heat, deficiency and excess patternvalues and saliva for cortisol awakening response (CAR). Saliva samples were collected immediately, 15, 30 and 45 min after awakening. In addition, Beck Depression Inventory (BDI) and Hamilton Depression Rating Scale (HDRS) were conducted for PSD severity. We conducted correlation analysis to find the relationship between cold, heat, deficiency and excess patterns and CAR or BDI and HDRS. Results : Deficiency and excess patterns werepositively correlated with area under the curve with respect to the increase (AUCi), but not with area under the curve with respect to the global (AUCg), in CAR. Furthermore, it was negatively correlated with BDI and HDRS, while cold and heat patterns were not correlated with CAR, BDI and HDRS. Conclusions : In terms of deficiency and excess patterns, the higher the PSD severity, the higher the deficiency and the lower the PSD severity, the higher the excess. However, there was not a significant relationship between PSD and cold and heat patterns.
The purpose of this study is to examine the effect of the improved cold tolerance resulting from cool clothing in winter on heat tolerance in summer. Ten healthy women were divided into two groups, cold group(C group) (n=5) and warm group(W group) (n=5) . In the previous study, C group was proved that their cold acclimatization was achieved through wearing cool clothing from September to February of the following year, while Wgroup was not proved because of wearing warm clothing during same period. After February, no more clothing training was continued in two groups. To determine the heat tolerance, both groups were exposed from a thermoneutral environment(25$\pm$1$^{\circ}C$, 50$\pm$5% R.H.) to a hot environment (35$\pm$1$^{\circ}C$, 50$\pm$5% R.H.) before and after clothing training, respectively September in 1994 and truly in 1995. Rectal temperature, skin temperatures, thermal sensation and comfort were measured every 10 min., and Os uptake was measured at 10, 45, 85 min. after entering the chamber for 5 min. Body weight was measured before and after the experiment and amount of local sweat was measured during the 90 min long experiment. The results are as follows: Rectal temperatures in 35'c environment of C group were increased after training when compared with before clothing, while those of W group were not changed. But the changes of rectal temperature and heat production during 90 min in hot environment were almost the same in two groups after training. And mean skin temperatures, the changes of mean skin temperatures during 90 min in hot environment, total sweat amount and local sweat amount after training were also the same in two groups. From these results, it might be supposed that the heat loss of two groups were the same but the heat production, especially heat production during rest in C group was higher than in Wgroup. This fact suggests that the increase of rest heat production from cold acclimatization in winter is maintained to summer of the following year. And mild cold acclimatization coming from westing cool clothing does not have a negative effect on heat tolerance.
Elimination of the heat treatment process is very important in automation of metal forming since controlling heat treatment by computer has many difficulties and it has bottle neck problem. non-heat-treated steels materials which are not in need of heat treatment have been developed for cold forging. However to apply non-heat-treated steel to structural parts. it is necessary to prove reliability of mechanical properties. In order to define the reliability of mechanical properties we have investigated microstructure, hardness, the tensile strength compressive strength and tensile fatigue strength for both steels. Considering the results of high cycle fatigue test for both specimen the characteristics of non-heat-treated steel are decided on the yield strength, It has same tendency for heat-treated steel. Therefore non-heat-treated steel which has the appropriate yield strength may be applied in cold forging.
Objectives : We presented the results of reliability study in advance, and analyzed agreement between Korean medicine doctors(KMDs)' diagnosis and cold-heat pattern identification questionnaire(CHPI)'s diagnosis. Methods : This survey was conducted from May 16 to 17, 2015. The subjects were 93 adults living in rural society. Diagnosis of CHPI was performed by 2 KMDs who have clinical experience more than 5 years. The KMDs' diagnosis was set as a reference index, and then we compare 23 items(cold pattern 11 items and heat pattern 12 items) of CHPI questionnaire and 15 items(cold pattern 8 items and heat pattern 7 items) that were brief form of it. We had cut-off value by standard of KMDs' diagnosis using receiver operating characteristic-curve(ROC-curve), with which we calculated agreement including kappa value. Correlation analysis between CHPI evaluation score by KMDs and by the questionnaire was fulfilled as well. Results : Agreement about 11 and 8 cold pattern items showed 87.1% together, and the value of kappa each recorded 0.742 and 0.741. Agreement about 12 and 7 heat pattern items suggested 81.7% and 78.5%, and the value of kappa showed 0.634 and 0.570. Correlation coefficients were 0.803 of 11 items and 0.761 of 8 items about cold pattern. In addition, correlation coefficients were 0.789 of 12 items and 0.767 of 7 items about heat pattern. The significant probability (p-value) was under 0.001. Conclusions : We have developed CHPI questionnaire involving reliability and agreement based on usual symptoms, and hope additional complements so that Korean medicine diagnostics and Korean preventive medicine would be improved.
To investigate and characterize basic patterns of prehypertension. Participants were divided into three groups; ideal blood pressure(n=40), prehypertension(n=62), and stage 1 hypertension groups(n=68) according to the JNC 7 standards. They answered questionnaire asking various symptoms and received clinical examination. Data were collected and analyzed in the focus of three Zheng patterns, cold-heat, deficiency-excess and four major hypertension types. Analysis of variance was used to find differences among groups. In addition, relationship between the cold-heat trends and risk factors of hypertension were analyzed using Pearson's correlation analysis. Three risk factors; age, body mass index (BMI), and fasting blood sugar (FBS) showed intergroup differences. Statistical significances were revealed in the cold-heat pattern and two hypertension subtypes. The cold scores decreased from $4.8{\pm}1.84$ to $3.9{\pm}1.88$ and $3.7{\pm}1.27$ (p=0.022), while the heat increased from $1.9{\pm}1.32$ to $2.8{\pm}1.72$ and $2.8{\pm}1.48$ (p=0.009). Additionally two hypertension subtypes, the excessive liver fire, and the yin-yang deficiency showed significant differences. Cold had negative correlations with blood pressure (both systolic and diastolic), BMI, triglyceride, and FBS. Heat had positive correlations with systolic blood pressure, BMI, triglyceride, and FBS. Prehypertension could be characterized by using the cold-heat patterns. The cold-heat are correlated with Blood pressure, BMI, blood lipids and sugar.
In order to improve efficiency, an outdoor unit using a refrigerant cooling method is designed into many air conditioner systems. The heat exchanger is composed of a Cu tube and an plate. The optimal design for the cold plate is very important because the efficiency of the heat transfer depends on the contact area between the Cu tube and the cold plate. The current study focused on the design of the cold plate to obtain a uniform contact between the Cu tube and the cold plate. Both FE(finite element) analysis and optimization were used in the design. The contact area between the tube and plate was predicted and improved by 16% through the press forming simulations. The springback after press forming was also reduced when the optimized design parameters were used. To verify the validity of the optimal cold plate design, a verification test was conducted. As a result, the performance of the heat exchanger improved by 34% when compared to benchmarked products.
Heat treatment conditions of 88.5% asymmetrically cold rolled oxygen free copper (OFC) sheets have been studied to obtain an equiaxed fine microstructure with a grain size of less than 10 ㎛. The commercial OFC sheets with the thickness of 10 mm were asymmetrically cold rolled by using equal speed asymmetric rolling (ESAR) processes and total rolling reduction. The thickness of the rolled sheets were 88.5% and 1.15 mm, respectively. An equiaxed fine microstructure of OFC sheets with a grain size of 6.0 ㎛ were obtained when the asymmetrically cold rolled OFC sheets were heat treated at 180℃ for 40 minutes. The tensile strength of the asymmetrically cold rolled specimen increased from 217.6 MPa to 396.1 MPa, while the elongation of the specimen asymmetrically cold rolled and heat treated increased from 29.0% to 66.9% along with an 8% increase of the tensile strength.
본 연구는 폭염 취약지역을 도출하고, 폭염 피해와의 공간적 일치성 분석을 통해 공간 유형화 및 정책적 방향성에 대해 논의하고자 한다. 연구 방법은 IPCC의 기후변화 취약성 평가와 공간통계 비교분석을 활용하였으며, 폭염이 가장 극심했던 2018년을 포함하는 5개년(2015~2019)의 전국 시군구를 대상으로 하였다. 폭염 취약성은 다양한 요소 중 폭염 영향을 나타내는 폭염일수(노출)가 가장 큰 영향을 미치고 있었으며, 폭염에 대한 민감도와 적응 능력은 지역의 특성에 따라 경향성이 나타나는 것으로 확인되었다. 폭염 취약성과 피해의 관계는 공간적 일치성을 통해 4개 유형으로 구분하였으며, 취약성과 피해가 정의 관계를 가지는 Hot to Hot, Cold to Cold 유형과 역의 관계를 가지는 Hot to Cold, Cold to Hot 유형을 도출하였다. 이는 유형별로 지역의 특성과 현황이 상이하므로 유형에 따라 개선을 위한 정책과 연구의 방향성을 달리 설정해야 한다는 시사점을 남긴다. 해당 연구는 폭염 취약성과 피해를 함께 고려하여 지역을 유형화하고, 유형별 대응 방향성에 대해 살펴본 점에서 추후 폭염 관련 정책 수립에 기초자료로 활용되기를 기대한다.
We are developing the methods for the objective and systematic diagnosis, but in actuality the relativity between a diagnosis of Korean medical doctor to a symptom of patients and the conformity to the expression of the Korean medical diagnostic mechanism is short of the statistical data. so, the questionnaire of Cold-Heat & Deficiency-Excess and a diagnosis of Korean medical doctor and a result of the Korean medical diagnostic mechanism, through the relationship of those, we have offered the objective data for diagnostic validity. The study group was 750 volunteers who diagnosed by Cold-Heat & Deficiency-Excess, out of 1475 volunteers who participated in Korean-Western medical examination. We compared the results of the questionnaires for Cold-Heat & Deficiency-Excess patternization through the questionnaire with a diagnosis of Korean medical doctor. we also studied the diagnostic validity for the item of the questionnaire by statistics analysis. It is proper that 9 questions of 16 questions for the Cold, 6 questions of 14 questions for the Heat, 13 questions of 14 questions for the Deficiency, 6 questions of 9 questions for the Excess, and there is close correlation between the questionnaire to the diagnosis. The difference between the questionnaire score is meaningful(p=0.000), this conforms to the diagnosis of the Korean medical doctor, so the questionnaire have the validity. The result of the questionnaire of Cold-Heat & Deficiency-Excess conform to a diagnosis of Korean medical doctor, it carries an important meaning by the measure of diagnosis, and it is necessary for further study for the significance of the medical diagnostic mechanism.
This study attempted to manufacture a Cu-15 at.%Ga coating layer via the cold spray process and investigated the effect of heat treatment environment on the properties of cold sprayed coating material. Three kinds of heat treatment environments, $5%H_2$+argon, pure argon, and vacuum were used in this study. Annealing treatments were conducted at $200{\sim}800^{\circ}C$/1 hr. With the cold sprayed coating layer, pure ${\alpha}$-Cu and small amounts of $Ga_2O_3$ were detected in the XRD, EDS, EPMA analyses. Porosity significantly decreased and hardness also decreased with increasing annealing temperature. The inhomogeneous dendritic microstructure of cold sprayed coating material changed to the homogeneous and dense one (microstructural evolution) with annealing heat treatment. Oxides near the interface of particles could be reduced by heat treatment especially in vacuum and argon environments. Vacuum environment during heat treatment was suggested to be most effective one to improve the densification and purification properties of cold sprayed Cu-15 at.%Ga coating material.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.