• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10b
• /
• pp.63-66
• /
• 2003

Forged gears have the obvious advantages with the greater utilisation of raw material and high productivity over the machined gears. The forged bevel gear has been used in differential gear for automotive with a high reliance. On the other hand, the studies have been continued to improve the accuracy and expand the applying areas. In this paper, a whole manufacturing process for forged gear from die design and cold forging to heat-treatment was introduced. The stress and elastic deformation for forging die have been analysed by the 3D-FEM-package. The real elastic deformation of die was measured by the strain-gages. The elastic deformation of die was reached to 1mm, in terms of the present study. The analysed quantitative dimension of die was taken into consideration into the CAD/CAM data for forging die.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.89-92
• /
• 2023

최근에 Serverless 컴퓨팅은 많은 관심을 받는 기술로, 서버 프로비저닝 없이 코드를 배포하고 실행할 수 있으며 요청량에 따라 동적으로 컴퓨팅 리소스를 확장하여 애플리케이션을 안정적으로 운영할 수 있는 환경을 제공한다. Serverless 컴퓨팅의 주요 이슈 중 하나인 cold start 는 함수를 실행하기 위한 컨테이너 초기화 및 구동하는 단계이며, 해당 과정에서는 이미지 풀링이 수행될 수 있다. 이미지 풀링은 cold start 지연의 대부분을 차지하고 함수의 응답시간을 증가 시켜서 사용자 경험에 부정적인 영향을 줄 수 있다. 따라서, 본 논문에서는 cold start 지연을 줄이기 위해 도커를 활용해서 이미지 레이어 동시 풀링 개수를 조절함으로써 이미지 풀링 속도를 개선시킬 수 있는지 분석하였다. 이와 같은 분석을 통해 풀링 개수가 풀링 속도에 영향을 줄 수 있음을 확인하였다.

• Food Science of Animal Resources
• /
• v.31 no.4
• /
• pp.497-505
• /
• 2011

The objective of this study was to examine the effect of hot-boning and soy sauce as a curing agent on the processing properties of beef jerky. Beef jerky was prepared under the following four treatment conditions; Beef jerky with cold-boned beef and salt solution, beef jerky with cold-boned beef and soy sauce solution, beef jerky with hot-boned beef and salt solution, and beef jerky with hot-boned beef and soy sauce solution. Cured meat and jerky containing hot-boned beef had a significantly higher pH, water holding capacity (WHC), moisture content, Myofibrillar fragmentation index (MFI), processing yields, tenderness, and sensorial scores than samples containing cold-boned beef (p<0.05). Regardless of the raw materials, the jerky containing soy sauce had a significantly lower pH, WHC, moisture content, salt content, TBA, CIE $L^*$ and $b^*-$ values, and significantly higher MFI, mechanical tenderness, and sensorial scores (p<0.05). Based on these findings, we concluded that the use of hot-boned meat and soy sauce was the most effective boning method and curing agent during beef jerky processing.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.125-126
• /
• 2006

The characteristics of the tool system give many effects into the costs and qualities for the finished components. Therefore, a tool life is one of the important issues on cold forging industry. However, since variables related with tool life are many complicated, the studies for solution should be investigated by the systematic research approach. In this study, heat-treatment of tool material is investigated to improve the tool life. Deep cryogenic treatment of tool steel is very efficient to improve the wear resistance due to the fine carbide. And, it is investigated that the shape and dimension of tool give effect into both tool life and quality of forged product.

• Transactions of Materials Processing
• /
• v.3 no.3
• /
• pp.282-290
• /
• 1994

The outer race of BJ type C.V.Joint has a complicated shape and ball grooves. It is produced by cold or warm precision forging. Especially, the precision level of the ball grooves determines the quality of the part. The objective of the present study is to develop process conditions of the cold forging using the plasticine. Because the cold forging consists of forward extrusion, upsetting, backward extrusion and cold sizing, the study was focused on finding the best perform for each process. The data obtained from the study will be used in the design of the cold forging process for the outer race.

• Transactions of Materials Processing
• /
• v.5 no.2
• /
• pp.105-114
• /
• 1996

Recently, precision forging techniques are applied to manufacture spur gears. Compared to conventional machining, they produce parts of better mechanical properties and less residual stresses with a much higher production rate. In the present investigation a rigid-plastic three dimensional finite element method was applied to analyze hot forging and cold sizing of a spur gear by closed dies. The involute curve of a tooth profile was approximated by a circle close to the curve. Results of the analyses make it possible to predict local strengths of the gear die failure and an appropriate preform for cold sizing. It was found that the preform for cold sizing. It was found that the preform for the cold sizing is the most important because it determines whether the gears especially teeth can be successfully formed.

• Transactions of Materials Processing
• /
• v.31 no.6
• /
• pp.394-403
• /
• 2022

In the automotive industry, cold-drawn austenitic stainless steel is commonly used to handle high fuel pressures in gasoline direct injection (GDI) engines. In this study, we analyzed the effects of main process variables such as cross-sectional shape, drawing speed and friction coefficient on the microstructure, hardness and residual stress of the drawn material in the two-step cold drawing process. By changing the cross-sectional shape in the first-step cold drawing, the possibility of improving the shape accuracy or physical properties of the finally cold-drawn fuel rail pressure sensor product was investigated.

• Transactions of Materials Processing
• /
• v.15 no.8 s.89
• /
• pp.603-608
• /
• 2006

The main purpose of the present study has been placed on investigating the mechanical properties and microstructures of C-Si-Mn-V steels for cold forming manufactured by controlled rolling and cooling technology. The steels were manufactured in electric arc furnace (EAF) and casted to $160{\times}160mm$ billet. The billets were reheated in walking beam furnace and rolled to coil, the stocks were rolled by Controlled Rolling and Cooling Technology (CRCT), so rolled at low temperature by water spraying applied in rolling stage and acceleratly cooled before coiling. Rolled coils were cold drawed to the degree of 16%, 27% of area reduction respectively without heat treatment. Microstructual observation, tensile test, compression test and charpy impact tests were conducted. The mechanical properties of the steels were changed by area reduction of cold drawing and it is founded that there are optimum level of cold drawing to minimize compression stress for these steels. From the result of this study, it is conformed that $80kg_{f}/mm^{2},\;90kg_{f}/mm^{2}$ grade high strength microalloyed steel for cold forming are developed by accelerated cooling and optimum cold drawing.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10b
• /
• pp.51-54
• /
• 2003

Internal defects such as chevron crack occasionally occur in the process of cold extrusion or cold drawing. It is known that the existence and property of inclusion greatly influences the generation of the internal crack. However, in the plastic working field, research about the effect of the inclusion on the fracture is not theoretically analyzed. This paper describes effects of the physical property of inclusion on the internal fracture generation in the process. Prediction of fracture was evaluated by critical damage value calculated by the equation of Cockcroft & Latham and its change by the inclusion physical property such as size and stiffness was investigated.

• Journal of Powder Materials
• /
• v.15 no.3
• /
• pp.227-233
• /
• 2008

Dynamic plastic deformation behavior of copper particles occurred during the cold spray processing was numerically analyzed using the finite element method. The study was to investigate the impact as well as the heat transfer phenomena, happened due to collision of the copper particle of $20{\mu}m$ in diameter with various initial velocities of $300{\sim}600m/s$ into the copper matrix. Effective strain, temperature and their distribution were investigated for adiabatic strain and the accompanying adiabatic shear localization at the particle/substrate interface.