• Journal of Environmental Science International
• /
• v.30 no.6
• /
• pp.475-485
• /
• 2021

This research investigated the characteristics of fine particles during cold front passage in Busan, on March 19, 2020. The cold front speed was 17.4 m/s (about 63k km/hr), moving from the northwest to the southeast, and with a width of about 64 km. The backward trajectory analysis showed that a southern sea air parcel flowed into Busan before the cold front passage, carrying continental materials from China transported into Busan after cold front passage. The PM₁₀ concentration in Busan showed a rapid increase after passing through the cold front, with PM_2.5 showing a high concentration during cold front passage. The PM_2.5/PM₁₀ ratio was 0.10 - 0.30. When the cold front passed, SO₄^2-, NO₃^-, Ca²⁺, NH₄⁺, Na⁺, and K⁺ in PM_2.5 showed a rapid increase, with SO₄^2- showing the most significant increase. These results indicated that understanding the characteristics of fine particles during cold front passage in Busan could provide insight into establishing a strategy to control urban air quality.

• Journal of Korea Multimedia Society
• /
• v.24 no.12
• /
• pp.1673-1681
• /
• 2021

Item cold start is a well studied problem in the research field of recommender systems. Still, many existing collaborative filters cannot recommend items accurately when only a few user-item interaction data are available for newly introduced items (Cold items). We propose a interaction feature prediction method to mitigate item cold start problem. The proposed method predicts the interaction features that collaborative filters can calculate for the cold items. For prediction, in addition to content features of the cold-items used by state-of-the-art methods, our method exploits the interaction features of k-nearest content neighbors of the cold-items. An attention network is adopted to extract appropriate information from the interaction features of the neighbors by examining the contents feature similarity between the cold-item and its neighbors. Our evaluation on a real dataset CiteULike shows that the proposed method outperforms state-of-the-art methods 0.027 in Recall@20 metric and 0.023 in NDCG@20 metric.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.11 no.1
• /
• pp.41-51
• /
• 2023

Purpose - The prior literature has shown that there is a lack of a complete assessment of the key decisions in cold chain logistics. Such a study is required to offer recommendations for research in this expanding but under-researched topic with potentially significant management ramifications. Research design, Data, and methodology - The current researcher accumulated peer-reviewed sources from databases to augment each chosen study's validity. Selection varied between seminal works and much of the existing literature. The selection process was consistent with using a content checklist that established the inclusion and exclusion criteria. Result - The research findings indicate total five solutions regarding better decision in Cold Chain Logistics (CCL), such as (1) Pricing Decision in Cold Chain Logistics, (2) Decision on Temperature Control Decision in Cold Chain Logistics, (3) Supply Chain Network Design in Cold Chain Logistics, (4) Decision on Minimizing Inventory in Cold Chain Logistics, (5) Decision on Logistics Distribution. Conclusion - Stability of a cold chain should be maintained from manufacture or via logistical components and cold logistics products are susceptible to several variables, such as temperature, and degradation can easily harm food supply, product prices, and human health. Product safety infractions substantially impact human health, among other losses linked with a functioning CCL.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.3
• /
• pp.110-117
• /
• 2022

A chiller cooler absorbs the thermal energy of water to generate cold water and supplies the generated cold water to a cold water pipe buried in the wall of a small mobile modular house to greatly increase the cooling area. An attempt was made to reduce the required cooling time significantly. A small chiller cooler suitable for the cooling load of a small mobile modular house with an area less than 3.3 m² was employed. When cooling is done during summer using a chiller cooler installed outdoors, heat absorption energy loss occurs in the cold water pipe owing to the high temperature. To address this, a study was conducted to reduce the endothermic energy loss significantly. As the mass flow rate of the cold water flowing inside the cold water pipe increased, the temperature decrease gradient of the cold water increased. From the start of the cooling operation, the air temperature of the small mobile modular house decreased linearly in proportion to the operation time. Furthermore, the temperature of the air inside the small mobile modular house decreased in proportion to the increase in the flow of water inside the cold water pipe.

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.311-313
• /
• 2004

WC-12-17%Co powders with nano- and micro-structures were deposited by cold spray process using nitrogen and helium gases. The results show that there is no detrimental phase transformation and/or decarburization of WC by cold spray deposition as expected. It is also observed that nano-sized WC in the feedstock powder is maintained in the cold spray deposition. It is demonstrated that it is possible to fabricate the nano-structured WC-Co coating with low porosity and very high hardness (-2050 HV) by cold spray deposition with reasonable powder preheating.

• Korean Journal of Animal Reproduction
• /
• v.20 no.4
• /
• pp.473-477
• /
• 1997

This research was performed to investigate the developmental ability of mouse oocytes following cold-culture(4$^{\circ}C$) in vitro. When the oocytes were fertilized after 10 hour cold-culture in D-PBS or Ham's F10 with 0.3% BSA, the cleavage rage of the oocytes was not different in the rate of oocytes fertilized in vitro without cold-culture(126/189, 66.2% vs 88/133, 66.7%) and also the rate of embryos developed to blastocyst did not(123/189, 65.1% vs 82/133). But, when the time of the cold-cultre was extended from 10 to 24 hours, the rate of embryos developed to blastocyst was slightly decreased(73.5% vs 52.2%). However, when the oocytes were cultured for 10 and 24hours at 37$^{\circ}C$, the rate of oocytes developed to blastocyst was significantly decreased than that of oocytes following cold-culture. By the results of this study, it'll be possible to utilize effectively the cold-culture of the oocytes when in vitro fertilization is delayed.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.2
• /
• pp.1-10
• /
• 1999

Direct extraction of FET's small signal model parameters needs predetermined parasitic elements usually obtained under forward cold FET conditionl This paper derives analytic intrinsic model for cold FET's and shows that normal cold FET condition can replace forward cold FET condition for extracting parasitic elements. Then, we track the error of hot FET's small signal model bounded by the cold FET condition and examine the validness of cold parasitic resistances by checking the existence of the error minimum.

• Journal of Ecology and Environment
• /
• v.34 no.3
• /
• pp.251-257
• /
• 2011

The purpose of this study was to investigate the acclimation responses of Tamarix chinensis to cold stress. We evaluated the acclimation responses by measuring biomass, daily elongation rate, chlorophyll content, and total soluble carbohydrate content. The plant samples comprised leaves from seedlings of 2 different ages (8 and 12 weeks); the leaves were collected 0, 2, and 4 weeks after cold treatment. We found that the cold-treated samples showed reduced daily elongation rates and chlorophyll content. Further, these samples showed more than 8-fold increase in the total soluble carbohydrate content. However, the seedling ages did not have a significant influence on the growth of cold-treated seedlings. On the basis of these findings, we can conclude that T. chinensis seedlings aged less than 1 year old show acclimation to cold stress by accumulating soluble carbohydrates. This study may help us understand how T. chinensis seedlings acclimatize to their first cold season.

• Journal of the Korean Ceramic Society
• /
• v.30 no.2
• /
• pp.157-163
• /
• 1993

Hot pressing after cold cyclic compaction of Al2O3 powder mixtures containing SiC whiskers or Al2O3 short fibers is studied with emphasis on the effects of cold cyclic compaction. The green density of the mixtures increases as the cycle number increases and the cyclic pressure becomes higher. The higher green density is also obtained by cold cyclic compaction with the lower pressrue than a single stroke cold compaction. To achieve a higher densification during hot pressing, cold cyclic compaction before hot pressing is more efficient compared to the conventional hot pressing process (without cold cyclic compaction). Moreover, a low cyclic pressure did not affect on toughening mechanism by whisker reinforcement.

• The Journal of Korean Physical Therapy
• /
• v.13 no.1
• /
• pp.41-48
• /
• 2001

The purpose of this study was to investigate the effect of cold application on ischemia-reperfusion injury to quadriceps fomoris muscle of the hindlimbs of the rats. Nine weeks old male Sprague-Dawley white rats were divided into three groups : 1) control(only ischemia-reperfusion), 2) cold application before reperfusion(PreCold), 3) cold application after reperfusion(PostCold). All groups were 30 minute, 1 hour, 3 hours reperfusion after 2 hours ischemia with clamping abdominal artery, and investigate superoxide dismutase(SOD) immunohistochemical reaction for quadriceps femoris muscle of right hindlimb. SOD immunohistochemical reaction of experimental groups were more than the control group. Especially, SOD immunohistochemical reaction of PreCold were less than the PostCold.