• The Journal of Natural Sciences
• /
• v.9 no.1
• /
• pp.19-24
• /
• 1997

Using the PCR(polymerase chain reaction method), gone 1 of phage K11 coding for K11 phage RNA polymerase has been cloned and expressed under the control of lac promoter. K11 phage RNA polymerase was conventionally purified through the DEAE-sephacel and Affigel blue column chromatographies. The 0.2-0.3 M $NH_4Cl$ fractions of DAEA-sephacel column chromatography showed K11 phage RNA polymerase activity and further purification with Affigel blue column chromatography showed nearly single protein band on SDS-polyacryl amide gel. K11 phage RNA polymerase, which is one of the T7 group phage RNA polymerase (E. coil phage T7, T3 and Salmonella tyhimurium phage SP6 RNA polymerase), shares high degrees of homology with the other T7 group phage RNA polymerase. Previously we constructed T7 and SP6 promoter variants and revealed promoter specificity of T7 and SP6 RNA polymerase (Lee and Kang, 1993). To investigate the promoter specificity of K11 RNA polymerase in vitro K11 promoter activity was measured with SP6 promoter variants. The SP6 promoter variant share highest degrees of sequence homology with K11 promoter sequence show strongest promoter activity.

• The Journal of Korean Physical Therapy
• /
• v.21 no.3
• /
• pp.87-93
• /
• 2009

Purpose: TThis study examined the effect of repetitive magnetic stimulation (RMS) on the viability and proliferative response of human adipose tissue-derived stromal cells (hATSCs) in vitro. Methods: The hATSCs were cultured primarily from human adipose tissue harvested by liposuction and incubated in a $37^{\circ}C$ plastic chamber. The cells were exposed to a repetitive magnetic field using a customized magnetic stimulator (Biocon-5000, Mcube Technology). The RMS parameters were set as follows: repetition rate=10Hz, 25Hz (stimulus intensity 100%= 0.1 Tesla, at 4cm from the coil), stimulated time= 1, 5, and 20 minutes. Twenty four hours after one application of RMS, the hATSCs were compared with the sham stimulation, which were kept under the same conditions without the application of RMS. The cells were observed by optical microscopy to determine the morphology and assessed by trypan blue staining for cell proliferation. The apoptosis and viability of the hATSCs were also analyzed by fluorescence-activated cell sorting (FACS) analysis of Annexin V and MTT assay. Results: After RMS, the morphology of the hATSCs was not changed and the apoptosis of hATSCs were not increased compared to the sham stimulation. The viability of the cells was similar to the cells given the sham stimulation. Interestingly, the level of hATSC proliferation was significantly higher in all RMS groups. Conclusion: The application of RMS may not cause a change in morphology and viability of hATSCs but can increase the level of cell proliferation in vitro. RMS might be useful as an adjuvant tool in combination with stem cell therapy without adverse effects.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.5
• /
• pp.464-470
• /
• 2010

The integrity of the industrial equipment in use under high temperature and high pressure must be assessed by regularly measuring the degraded mechanical properties during service time. In order to nondestructively monitor the degraded mechanical properties of industrial equipment, a measuring method of the reversible permeability(RP) using surface type probe is presented. The method for measuring the RP is based on that RP is the differential value of hysteresis loop. The RP is exactly the foundation hatmonics induced in a detecting coil measured by lock-in amplifier tuned to a frequency of the alternating perturbing magnetic field. The peak of RP is measured around the coercive force. Steel material used in this work was 12Cr ferritic heat resisting steel. The eleven kinds of samples aged during different times under same temperature ($700^{\circ}C$) were prepared. Peak interval of reversible permeability(PIRP), Vickers hardness, and tensile strength measured for the aged samples decreased abruptly for short aging time (below 500 h), but the change became small at a long aging time. Vickers hardness and tensile strength linearly decreased as RIRP decreased, so the degraded mechanical properties of 12Cr ferritic heat resisting steel could be nondestructively evaluated by measuring RIRP.

• Journal of environmental and Sanitary engineering
• /
• v.7 no.2
• /
• pp.111-128
• /
• 1992

According to the increase of population and industrialization, the quality of our drinking water are becoming worse by the contamination of resources, production of THM and other halogenated hydrocarbons during the purifying process, the problem of corroded water supplying pipeline, and the water reservoir tanks, Many people choose groundwater to drink instead of city tap water, but sometimes we get report about groundwater contamination by wastes, swage, septic tank, etc. It is reported that in U. S. over 20% of population are drinking groundwater, but U. S EPA reported the groundwater contamination by pesticides, herbicides, fungicides, fertilizer, and various chemical substances. Craun, et at announced the groundwater contamination by bacteria which are related with poor installation of septic tank. Johnson and Kross mentioned aboutmethemoglobinemia by NO3-N originated from human and animal feces, organic chemicals, and fertilizer, and as the results the infant mortality could be risen. Some scientist also reported the high concentration of metals in groundwaters and some cation and anions, and volatile organic compou nds. Authors investigated 80 groundwaters in urban, agricultural, and industrial area during last 3 month(June - August) to check any drinking water quality parameters are exceeding the standards. The results were as follow. 1, The average value of ammonia nitrate were within the standard, but 11.76% of urban area were exceeded the 10 rpm standard, in agricultural area 42.3175 were exceeded, and in industrial area 20.2% were exceeded the drinking water standard of 10 ppm. the highest concentration was 29.37 ppd in industrial area. 2. The mean value of metals is not exceeded the standard, but there were some groundwater whose Mn value was 0.424 ppm(standard is 0,3 ppm) in urban area, 0.737 rpm in agricultural area, and 5.188 ppm in industrial area. The highest Zn value was 1.221 ppm (standard is 1.0 ppm)was found in industrial area. 3. The percentage of contamination by general bacteria was 8.82% in urban area, 15.38% in agricultural area, and 15.00% in industrial area. Escherichia coil group was also contaminated by 35.29% in urban area, 30.76% in agricultural area, and 30.00% in industrial area. 4, The pH value was within the standard which means there was no influence by acid or alkali chemicals, nor acid rain Through the above results, all the groundwater should be tested to check the safety for drinking water and should make some alternative methods suitable for drink.

• The Journal of the Korean Society for Microbiology
• /
• v.12 no.1
• /
• pp.1-10
• /
• 1977

40 strains of E. coli isolated from residents of a doctorless area in Korea in 1976 and 40 strains of E. coli isolated from patients of Seoul National University Hospital from 1975 to 1976 were examined for susceptibilities to 14 antimicrobial agents by the agar dilution method. The susceptibilities of the two groups to each antimicrobial agent were compared and correlations in the antimicrobial susceptibility of the 80 strains of E. coli among the 14 antimicrobial agents were also analyzed. The results were obtained as follow: 1. With Tetracycline, Oxytetracycline, Doxycycline and Ampicillin, the mean MIC's of E. coli isolated from patients of Seoul National University Hospital were 8.6 to 14 times higher than. those of E. coli isolated from residents of a doctorless area. 2. With Streptomycin, Minocycline and Carbenicillin, the mean MIC's o{ E. coli isolated from patients of Seoul National University Hospital were 4.1 to 5.6 times higher than those of E. coil isolated from residents of a doctorless area. 3. With Kanamycin, Penicillin and Cotrimoxazole, the mean MIC's of E. coli isolated from patients of Seoul National University Hospital were 2.6 to 3.7 times higher than those of E. coli isolated from residents of a doctorless area. 4. There were no significant differences in susceptibility to Erythromycin respectively between E. coli isolated from patients of Seoul National University coli isolated from residents of a doctorless area. 5. E. coli isolated from patients of Seoul National University Hospital were resistant to Erythromycin(100%), Streptomycin(75%), Tetracycline(72.5%), Oxytetracycline(72.5%), Doxycycline(72.5%), Minocycline(67.5%), Penicillin(82.5%), Ampicillin(60%) and Carbenicillin(65%) respectively and were sensitive to Gentamicin(97.5%), Cephalexin(92.5%) and Kanamycin(72.5%) respectively. 6. E. coli isolated from residents of a doctorless, area were resistant to Erythromycin(100%), Streptomycin(40%) and Penicillin(50%) respectively and were sensitive to Gentamicin(100%), Kanamycin(92.5%), Tetracycline(87.5%), Oxytetracycline(87.5%), Doxycycline(87.5%), Minocycline(87.5%), Ampicillin(95%), Carbenicillin(92.5%) and Cephalexin(97.5%) respectively. 7. There were high correlations among the suscebtibilities of the 80 strains of E. coli to Tetracycline analogues(Tetracycline, Oxytetracycline, Doxycycline and Minocycline) and among susceptibilities of the 80 strains of E. coli to Penicillin analogues(Penicillin, Ampicillin and Carbenicillin). 8. There were relatively high correlations between the susceptibilities of the 80 strains of E. coli to Penicillin analogues and those to Tetracycline analogues, between the susceptibilities to Penicillin analogues and those to Streptomycin and between the susceptibilities to Tetracycline analogues and those to Streptomycin.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.10
• /
• pp.123-130
• /
• 2016

High-frequency induction heating equipment can heat the metal by applying a High-Frequency power to the resonant circuit. The resonance circuit is composed of the work coil and the conduction-cooled power capacitor, it influences the performance of the heat treatment equipment according to the characteristics of the capacitor. However, dependence on conduction-cooled power capacitor's import is high due to lack of core technology research and development. Minimizing the generation of internal heat transmitted inside during LC resonance, reduce the reactive power loss, there is a need for a capacitor within the voltage characteristic outstanding. To implement localization it is vital that prior study of the analysis on the frequency response characteristic for the finished capacitor advanced manufacturer be implemented. Studying the interpolation method to read the value at any point of the characteristic curve for a given log-log scale was applied to the analysis tool of the capacitor by my proposed algorithm. The simulation for reproducing frequency response curves was attempted by assuming a capacitor in a simplified series equivalent RC circuit to obtain the equivalent series resistance value. It was confirmed that the reproduction rate was the result value above 83% as compared to the simulation of the properties and characteristics on the actual reactive power for Peak value, and that the algorithm can be applicable when analyzing and predicting the characteristic curves of a simpled model capacitor.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.8
• /
• pp.977-983
• /
• 2007

Recently, the number of systems which utilize wireless power transmission to a receiving module in a short distance is increasing. For efficient use of receiving space, coils are wound around the ferrite core to produce electromotive force(emf) in suppling power by wireless transmission. This paper analyzed the magnetic flux density distribution in the ferrite core in magnetic field environment which is uniformly oriented along to a single axis at 125kHz. For numerical analysis, Ansoft Maxwell which is applying the FEM(Finite Element Method) method was used. We studied the variations of the gathered magnetic fluxes to the changes of the relative permeabilities of the ferrite cores. Also we calculated the magnetic flux variation by shaving the ferrite core off for the groove of coil winding. Results showed that using a small ferrite core in magnetic field at 100kHz band can increase the amount of magnetic flux $3{\sim}4 times$ than without the core. The magnetic flux decreased 23% by shaving the core 0.5 mm on the periphery of 4.75 mm radius core with the relative permeability 800.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.10
• /
• pp.1565-1574
• /
• 2018

Objective: The aim of the present study was to identify genetic variants based on RNA-seq data, obtained via transcriptome sequencing of muscle tissue of pigs differing in muscle histological structure, and to verify the variants' effect on histological microstructure and production traits in a larger pig population. Methods: RNA-seq data was used to identify the panel of single nucleotide polymorphisms (SNPs) significantly related with percentage and diameter of each fiber type (I, IIA, IIB). Detected polymorphisms were mapped to quantitative trait loci (QTLs) regions. Next, the association study was performed on 944 animals representing five breeds (Landrace, Large White, Pietrain, Duroc, and native Puławska breed) in order to evaluate the relationship of selected SNPs and histological characteristics, meat quality and carcasses traits. Results: Mapping of detected genetic variants to QTL regions showed that chromosome 14 was the most overrepresented with the identification of four QTLs related to percentage of fiber types I and IIA. The association study performed on a 293 longissimus muscle samples confirmed a significant positive effect of transforming acidic coiled-coil-containing protein 2 (TACC2) polymorphisms on fiber diameter, while SNP within forkhead box O1 (FOXO1) locus was associated with decrease of diameter of fiber types IIA and IIB. Moreover, subsequent general linear model analysis showed significant relationship of FOXO1, delta 4-desaturase, sphingolipid 1 (DEGS1), and troponin T2 (TNNT2) genes with loin 'eye' area, FOXO1 with loin weight, as well as FOXO1 and TACC2 with lean meat percentage. Furthermore, the intramuscular fat content was positively associated (p<0.01) with occurrence of polymorphisms within DEGS1, TNNT2 genes and negatively with occurrence of TACC2 polymorphism. Conclusion: This study's results indicate that the SNP calling analysis based on RNA-seq data can be used to search candidate genes and establish the genetic basis of phenotypic traits. The presented results can be used for future studies evaluating the use of selected SNPs as genetic markers related to muscle histological profile and production traits in pig breeding.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.233-236
• /
• 2001

일반적으로 스피커를 동작시키게 되면, 스피커 보이스 코일에 열이 발생하게 되고, 열에 의한 보이스코일의 저항의 증가가 나타나게 되는데, 기존의 연구는 저음용 스피커(Woofer) 만을 대상으로 스피커의 음향특성 변화들에 관해 수행되었다. 그러나, 현대의 스피커는 A/V시스템분야의 발전에 따라 고음재생의 충실도가 강조되고 있는 경향이므로, 고음용 스피커(Tweeter)에 대한 열 발생의 영향을 조사하였다. 본 연구에서는 고음용 스피커의 입력전력에 따른 특성 변화를 조사하고, 입력전력의 증가로 인한 보이스코일(voice coil)의 저항 증가에 따른 고음용 스피커의 특성변화에 관해 실험하였다. 그리고, 스피커의 진동에 의한 펌프(pump) 역할을 이용하는 냉각용 구멍을 뚫어 스피커의 특성변화를 검토하였다. 실험대상으로는 직경 25mm의 돔(Dome)형 진동판을 가진 고음용 스피커와 이 스피커의 후면 중심부에 구멍을 뚫어 열 방출구가 형성된 3종의 시료를 대상으로 특성변화를 비교$\cdot$측정하였다. 여기에서, 사용된 시료는 국내 Y사의 판매용 고음용 스피커로 제품의 원 상태인, 구멍이 없는 것을 기준시료로 하고, 이와 동일한 제품들의 후면에 각각 직경 5mm, 10mm, 15mm의 구멍을 가공하여 비교시료로 하였다. 기준 및 비교시료의 스피커 특성을, 한국산업규격 KS C 6027의 측정법에 따라, 입력 1W 상태에서 기준시료의 사양을 측정하였고[1], 입력을 0.5W, 1W, 2W, 4W, 8W, 16W로 가하여, 시료별 입력증가에 따른 스피커의 주파수 응답특성, 임피던스(Impedance), 조화 왜(Harmonic Distortion)의 변화율 측정을 통해 스피커의 특성변화 정도를 검토하였다. 향후, 본 연구의 결과는 고음용 스피커의 특성 열화에 대한 예측 및 개선 방안을 제시하는 기본 자료로 활용이 가능할 것으로 사료된다.용하여 현금흐름예측을 할 수 있는 Model을 제시하였다. 특히 건설공사의 현금흐름 예측의 중요한 요소인 Cash-Out에 대하여, 공사비 구성요소인 자재, 노무, 중기, 외주, 경비등 각 Resource의 보할(Weights)을 실 공사원가에 따른 보할의 변화와 Resource들의 Time Lag를 적용 기존 연구자의 Model과 다른 Model을 제시하였다. 또한 기존 연구자들의 Model과 비교하여 편리성, 정확도 및 신뢰성이 높은 Model임도 증명하였다.세대까지도 발현수준이 유지될 것으로 판단된다. 이러한 연구결과는 계통으로 확립된 형질전환 동물에 부여된 새로운 유전형질은 지속적으로 후대로 유전될 수 있음을 제시한다.잖⨀瘀Ā퀇Āゑ잖⨀Ā퀇Ԁ￿™잖⨀䌀Ā퀇ĀꄏĀꀏꄏĀꀏ₱?⨀Ā Ԁ￿䂱?⨀ऀĀ耀Ā삱?⨀؀Ā Ā?⨀ጀĀ耀Ā?돀ꢘ?⨀硩?⨀ႎ?⨀?⨀넆돐쁖잖⨀쁖잖⨀／ࠐ?⨀焆덐瀆倆Āⶇ퍟ⶇ퍟ĀĀĀĀ磀鲕좗?⨀肤?⨀⁅Ⴅ?⨀쀃잖⨀䣙熸ጁ↏?⨀

• The korean journal of orthodontics
• /
• v.20 no.2
• /
• pp.363-379
• /
• 1990

The purpose of this study was to evaluate the effects of the mandibular retractive force on the mandibular condyle of growing dog. The experimental animals were six mongrel dogs of two-month old. Their deciduous dentition were completed. Two of them was used as control group, and experimental group was composed of remaining four. Head band and chin cup were made of cotton tape, and hooks are fabricated on the chin cup and had band for closed coil. Mandibular retractive force was 100g/side and chin cap appliance was used for 14 hours/day during night. Experimental group were sacrificed at 2, 4, 6, 8 weeks from beginning of the experiment. Right TMJ was prepared for histologic study and left TMJ was examined grossly for disc, fossa, and condyle. The conclusions are: 1. Two-month old control animal showed active cartilaginous growth on the mandibular condyle, therefore showed thick proliferative and hypertrophic zones. Remodeling process in the condyle head was observed in which there were bone resorption on the anterior surface and bone apposition on the posterior surface. 2. Four-month old control animal showed marked reduction of hypertrophic zone but the condylar bone remodeling was more pronounced. 3. In experimental group, there are marked reduction of hypertrophic zone at 4 weeks from beginning of experiment, and hypertrophic zone disappeared at posterior-superior portion of condyle in 6-week experimental animal. 8 week experimental animal showed slight recovery of hypertrophic zone. 4. In experimental group, bone deposition was increased at anterior surface of condyle, and bone resorption was increased at posterior surface of condyle. 5. In control group, the glenoid fossa and surrounding bone showed mainly bone apposition. But experimental group showed bone resorption at anterior surface of articular eminence and increased bone apposition at posterior surface of postglenoid spine. 6. No marked traumatic change was seen but 4 weeks and 8 weeks experimental animal showed flattening of posterior surperior condylar surface. Bone marrow of condyle showed minute focal bleeding in 2 weeks and 4 weeks experimental animal, and congestion and depression of hematopoietic bone marrow during all experimental period.