• 한국지반공학회논문집
• /
• 제16권6호
• /
• pp.35-41
• /
• 2000

Residual stress is defined as a minimum stress with a large displacement of specimens and the residual stress after peak shear stress appears with displacement volume but there is no provision to select the residual stress. In the previous study, residual stress was recorded when the change of shear load is small in the condition of the strain more than 15%. But, in this study, hyperbolic function((No Abstract.see full/text), b=experimental constant) of soil test is adapted to joint of rock and the propriety is investigated. In a landslide and landsliding of artificial slope, wedge failure of tunnel with a large displacement, tests are simulated from peak stress to residual stress for safety analysis. But now. direct shear stress and triaxial compressive tests are usually performed to find out characteristics of shear stress about joint. Although these tests get a small displacement, that data of peak stress and residual stress are used for safety analysis. In this study, we tried to determine failure criteria for joints of rock using ring shear test machine. The residual stress following shear behavior was determined by the result of ring shear test and direct shear test. In conclusion, after comparing the results of the two test, we found that cohesion(c) and internal friction angle(ø) of ring shear test are 30% and 22% respectively of those of the direct shear test.

• 한국지반신소재학회논문집
• /
• 제12권3호
• /
• pp.23-29
• /
• 2013

동결토는 물과 얼음의 상변화에 따라 일반적인 흙과는 다른 거동을 보이며, 동결토의 강도는 온도, 함수비, 시간, 토질 특성 등 다양한 인자에 의해 영향을 받는다. 특히 지반이 동결되는 경우, 얼음과 흙 입자의 결합력에 의해 높은 강도 특성을 보이며, 이때의 전단강도는 흙의 구조적 결합에 영향을 미치는 얼음과 세립분의 함량에 따라 달라지며, 이로 인해 점착력이 동결토의 전단강도에 미치는 영향은 증가한다. 본 논문에서는 동결조건에서 직접전단시험과 일축압축강도시험을 실시하여 온도에 따른 흙의 강도 특성을 확인하였으며, 점착력과 일축압축강도와의 상관관계를 확인하였다.

• Geomechanics and Engineering
• /
• 제18권4호
• /
• pp.427-437
• /
• 2019

Waste materials are being produced in huge quantities globally, and the usual practice is to dump them into legal or illegal landfills. Recycled tiles (RT) are being used in soil stabilisation which is considered as sustainable solution to reduce the amount of waste and solve the geotechnical problems. Although the stabilisation of soil using RT improved the soil properties, it could not achieve the standard values required for construction. Thus, this study uses 20% RT together with low cement content (2%) to stabilise soft soil. Series of consolidated undrained triaxial compression tests were conducted on untreated and RT-cement treated samples. Each test was performed at 7, 14, and 28 days curing period and 50, 100, and 200 kPa confining pressures. The results revealed an improvement in the undrained shear strength parameters (cohesion and internal frication angle) of treated specimens compared to the untreated ones. The cohesion and friction angle of the treated samples were increased with the increase in curing time and confining pressure. The peak deviator stress of treated samples increases with the increment of either the effective confining pressures or the curing period. Microstructural and chemical tests were performed on both untreated and RT-cement treated samples, which included field emission scanning electron microscopic (FESEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and energy dispersive X-ray spectrometer (EDX). The results indicated the formation of cementation compounds such as calcium aluminium hydrate (C-A-H) within the treated samples. Consequently, the newly formed compounds were responsible for the improvement observed in the results of the triaxial tests. This research promotes the utilisation of RT to reduce the amount of cement used in soil stabilisation for cleaner planet and sustainable environment.

• 지질공학
• /
• 제19권2호
• /
• pp.177-189
• /
• 2009

이 연구는 토질역학에서 중요하게 취급되는 전단강도를 몇 가지 토질물성만으로 쉽게 산정할 수 있도록 통계적인 방법의 하나인 선형회귀분석법을 이용하여 전단강도산정모델을 개발하였다. 전단강도는 강도정수인 전단저항각(${\phi}$)과 점착력(c)으로 구분되므로 SPSS의 상관분석을 통해 토질시험 결과들 중 이들 강도정수에 유효한 토질인자를 선별한 후 선별된 인자들과의 관계를 선형회귀분석으로 공식화 하였다. 또한, 개발된 모델과 직접전단시험으로 구한 강도정수를 비교분석하여 모델의 적합성을 검증하였다. 여러 토질물성과 강도정수간의 상관관계를 분석한 결과 전단저항각에 가장 크게 영향을 미치는 토질인자는 간극비 및 건조단위중량이고, 점착력에 크게 유의한 토질인자는 간극비, 건조단위중량 및 소성지수인 것으로 나타났다. 한편, 전단강도산정모델에 의해 산정된 강도정수는 직접전단시험에 의해 구한 강도정수와 거의 유사한 결과를 보였다. 따라서 개발된 전단강도산정모델은 연구지역과 같은 토질조건인 경우 토층의 강도정수 산정을 위한 모델로 이용이 가능할 것으로 사료된다.

• Advances in concrete construction
• /
• 제13권3호
• /
• pp.265-279
• /
• 2022

The roughness of substrate concrete interfaces before new concrete placement has a major effect on the interface bond behaviour. However, there are challenges associated with the consistency of the final roughness interface prepared using conventional roughness preparation methods which influences the interface bond performance. In this study, five quantitative interface roughness textures with different roughness tooth angles, depths, and tooth distribution were created to ensure consistency of interface roughness and to evaluate the bond behaviour at a precast and new concrete interface using the splitting tensile test, slant shear test, and double-shear test. In addition, smooth interface specimens and two separate the pitting interface roughness were also utilized. Obtained results indicate that the quantitative roughness has a very limited effect on the interface tensile bond strength if no extra micro-roughness or bonding agent is added at the interface. The roughness method however causes enhanced shear bond strength at the interface. Increased tooth depth improved both the tensile and shear bond strength of the interfaces, while the tooth distribution mainly influenced the shear bond strength. Major failure modes of the test specimens include interface failure, splitting cracks, and sliding failure, and are influenced by the tooth depth and tooth distribution. Furthermore, the interface properties were obtained and presented while a comparison between the different testing methods, in terms of bond strength, was performed.

• 터널과지하공간
• /
• 제10권2호
• /
• pp.180-195
• /
• 2000

본 연구에서는 주입에 의한 암석절리면의 수직압축특성과 전단특성의 변화를 규명하기 위하여 신선한 인공절리에 대하여 시멘트현탁액을 주입한 후, 절리 압축시험과 직접전단시험을 실시하였다. 시멘트현탁액을 주입한 맞물린 단일암석 절리의 수직압축시험결과, 주입전 비선형적이었던 절리의 수직응력-수직변형곡선은 선형적으로 바뀌었으며 2 MPa까지의 수직변형은 주입전의 1/10정도로 감소하였다. 시멘트현탁액 주입후 신선한 단일암석절리에 대한 직접전단시험결과, 파괴포락선은 1 MPa내외의 점착력과주입전보다 낮은 마찰각을 가지는 것으로 나타났으며, 주입두께가 커질수록 마찰각은 더 낮아지는 것으로 나타났다. 잔류전단강도는 주입두에와의 상관성을 확인할 수 없었으나, 전단강성과 최대팽창각은 주입두께가 증가할수록 감소하는 경향을 나타내었다. 이러한 주입두께에 대한 전단특성들의 감소현상들은 주입재에 의한 절리면 유효거칠기의 감소효과로부터 발생한 것으로 판단되며 직접전단시험에서 얻어진 최대전단강도를 주입두께대 거칠기평균진폭비를 포함한 경험식으로 나타내었다.

• 한국지반공학회논문집
• /
• 제34권4호
• /
• pp.37-47
• /
• 2018

본 연구에서는 상대밀도와 세립분 함유율이 현장타설말뚝의 인발저항 성능에 미치는 영향을 평가하기 위하여, 다양한 상대밀도 및 세립분 함유율 조건에 대한 직접전단시험 및 모형말뚝 인발실험을 수행하였다. 직접전단시험으로부터 세립분 함유율에 따른 내부마찰각과 점착력의 변화특성을 정량적으로 파악할 수 있었으며, 인발실험 결과에서는 말뚝의 인발저항 성능에 미치는 상대밀도와 세립분 함유율의 영향을 확인할 수 있었다. 또한, 두 실험 결과를 비교 분석한 결과, 말뚝의 인발저항 성능에 대한 지반의 내부마찰각과 점착력의 기여도는 세립분 함유율 약 13%를 전후로 하여 서로 다르게 나타남을 알 수 있었다. 따라서 현장타설말뚝 설계 시 수행되는 마찰저항 성능 평가는 지반의 세립분 함유율에 따른 강도정수($c-{\phi}$)를 고려해야 할 것으로 평가되었다.

• 한국해양공학회지
• /
• 제25권3호
• /
• pp.34-39
• /
• 2011

This study investigated the shear and CBR characteristics of dredge soil-bottom ash-waste tire powder-mixed lightweight soil, which was developed to recycle dredged soil, bottom ash, and waste tire powder. Test specimens were prepared with various contents of waste tire powder ranging from 0 to 100% at 50% intervals by the weight of the dry dredged soil. Several series of triaxial compression tests and CBR tests were conducted. The shear strength characteristics of the lightweight soil were compared using two different shear tests (triaxial compression test and direct shear test). The experimental results indicated that the internal friction angle of the lightweight soil obtained by the direct shear tests was greater than that by the triaxial shear tests. However, the cohesion value obtained by the triaxial shear tests was greater than that by the direct shear tests. The CBR value of the lightweight soil decreased from 35% to 15% as waste tire powder content increased.

• 한국농공학회지
• /
• 제42권6호
• /
• pp.106-114
• /
• 2000

In order to evaluate the shear characteristics of undisturbed weathered granite soil which is a typical residual soil in Korea, the mechanical properties are first investigated and discussed by carrying out a series of direct shear test and then dilatancy correction is performed by using Taylor’s correction equation. In this study, specimens are sampled at Pungam(-3, -8, -13m below ground surface), Kwangju and Iksan(-5m below ground surface), Jeonbuk. The test results are summarized as follows: 1) Mohr-Coulomb failure criterion is not linear under the low confining pressure. 2) The value of cohesion is smaller than usually determined value in low pressure region. 3) The value of strength parameter c and ø which are corrected by Taylor’s correction equation is a little bit small.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.370-374
• /
• 2001

This study was performed to find the basic data, as needed on the reinforced clayey soil construction work, by estimating job difficulty and optimum moisture content of the reinforced clayey soil, according to its slump test and workability test. As a result, it has been found that the more increasing reinforced clayey soil's moisture content, the higher its slump value. Its 25% moisture content: the reinforced clayey soil except the fiber reinforced soil was able to work with hand; the fiber reinforced soil with the 0.5% or 1.0% of fiber ratio was poor cohesion because of surplus quantity of fiber. Its moisture content between 30% and 35%: shoveling is somewhat difficult but troweling is possible. This study will be needed to modify and add by another.