• 대한기계학회논문집A
• /
• 제29권11호
• /
• pp.1542-1550
• /
• 2005

This paper presents the numerical procedure for calculating non-uniform residual stresses based on relieved displacements obtained from incremental hole drilling. The relationship between the in-plane displacement produced by introducing a blind hole and the corresponding residual stress is established. Finite element calculations are described to evaluate the relieved coefficients required for the determination of non-uniform residual stresses. Validity of the proposed method has been tested through three axisymmetric test examples and two three-dimensional examples. As a result of . simulation on the test examples, it is found that this numerical procedure is well adopted to measuring non-uniform residual stress in the full hole depth range of the hole diameter from the surface. The accuracy of the hole drilling method with displacement measurement is discussed, comparing tile method with strain measurement

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.299-306
• /
• 2000

The elastic critical load of a slender compression member plays an important role when the proper design of that member is required. For tapered compression members, however, there are cases when the conventional neutral equilibrium or energy method can't be applied to the determination of critical loads. In this paper, the finite element method is applied to the approximate determination of the linearly tapered members. In this paper, the bars are assumed to be tapered linearly along their axes. The parameters considered in this study are taper parameter, α and the sectional property parameter, m. The member ends are either hinged or fixed. The computed results using the finite element method are represented in the forms of algebraic equations. The regression technique is employed to determine the coefficients of the algebraic equations. Critical loads estimated by the proposed algebraic equations coincide flirty well with those employing the finite element method.

• 한국항해항만학회지
• /
• 제27권4호
• /
• pp.351-357
• /
• 2003

충돌위험도의 정량적인 평가는 항해ㆍ충돌방지 전문가 시스템 개발에 있어서 중요한 역할을 한다. 이 연구에서는 sech 함수를 이용한 새로운 충돌위험도 평가법에서 나타난 기울기계수를 결정하는 방법을 이론적으로 분석하고 실제 상황에 적용할 수 있는 값을 제시하였다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1514-1514
• /
• 2001

In this paper a fast non-destructive analytical method to measure various nutrients in the intact tomato---Near infrared Spectrometry NIRs was introduced Using this method the content of some organic acid, vitamin C, reductive sugar, and solid soluble were determined simultaneously. Screen out four wavelengths at 916nm, 1000nm, 1004nm and 832nm to present optimum four optical terms of d$^2$ log(1/R) with second derivative spectra treating data scanned under these wavelengths. The multiple correlation coefficients between these values and those obtained on chemical analysis were 0.983, 0.990, 0.987, and 0.994, respectively, and the standard errors of prediction (SEP) were 0.007, 0.440, 0.037, and 0.057, respectively. These results indicate that NIRs is comparable to chemical methods in both accuracy and precision and is reliable method for determination of nutrients in intact tomato.

• 대한전기학회논문지
• /
• 제35권6호
• /
• pp.246-256
• /
• 1986

Determination of an aerodynamic structure is a very important problem in missile modeling. The structure problem is to choose an appropriate set of aerodynamic coefficients to represent chosen missile dynamics. A methodology and criteria to determine a structure from windtunnel data are presented in this paper. Aerodynamic coeffecients in the determined structure are then identified by parameter identification algorithms. The identified coefficients are in turn used to verify appropriateness of the structure. The extended Kalman filter (EKF) and the maximum likelihood mithod (ML) are adopted as the parameter identification algorithm. Both methods exhibit satisfactory results. While the model identified by the ML more closely follows dynamics of the chosen missile than that by the EKF.

• 대한화학회지
• /
• 제31권1호
• /
• pp.64-70
• /
• 1987

모자나이트광에서 희토류원소(Y 및 Th포함)를 분리하여 X-선 형광분광법으로 정량하였다. 희토류원소간의 상호간섭이 있으므로 이를 메트릭스 계수를 이용한 실험계수법으로 보정하였다. 이 방법에서 표준시료의 수는 메트릭스 계수에는 큰 영향을 미치지만 분석결과는 큰 차이가 없었으며 유도결합플라스마 분광법에 의한 분석결과와 비교적 잘 일치하였다.

• 한국세라믹학회지
• /
• 제20권2호
• /
• pp.129-134
• /
• 1983

MgO.$Al_2O_3$ polycrstalline spinel powder was subjected to vaporization over the temperature range of 1150-130$0^{\circ}C$ under H2 atmosphere. Diffusion coefficient of oxygen ion through the spinel were calculated using the measure vaporization rates as follows : D=28.4 exp(-901500/RT) Reference data of the vaporization rates of MgO.$8Al_2O_3$ single crystal spinel were applied to the vaporiza-tion model proposed in this study and were calculated to give the oxygen ion diffusion coefficients over the tempera-ture 1700-195$0^{\circ}C$. The obtained diffusion coefficients are as follows: $D=3.20{\times}106$ exp(-155600/RT)

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.236-238
• /
• 2003

The electron transport coefficients, the electron drift velocity W, the longitudinal diffusion coefficient $ND_L$ and $D_L/\mu$, in pure Ne were calculated over the wide E/N range from 0.01 to 800 Td at 1 Torr by two-term approximation of the Boltzmann equation for determination of electron collision cross sections set and for quantitative characteristic analysis of Ne molecular gas.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.520-525
• /
• 2003

The determination of unknown parameters in rotating machinery is a difficult task and optimization techniques represent an alternative technique for parameter identification. The Simulated Annealing(SA) and Genetic Algorithm(GA) are powerful global optimization algorithm. This paper proposes new hybrid algorithm which combined GA with SA and local search algorithm for the purpose of parameter identification. Numerical examples are also presented to verify the efficiency of proposed algorithm. And, this paper presents the general methodology based on hybrid algorithm to identify unknown bearing parameters of flexible rotors using measured unbalance responses. Numerical examples are used to ilustrate the methodology used, which is then validated experimentally.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.934-941
• /
• 2000

We measured the electron transport coefficients, the electron drift velocity W and the longitudinal diffusion coefficient $D_{L}$ in the 0.526% and 5.05% $C_{3}F_{8}$-Ar mixtures over the E/N range from 0.01 Td to 100 Td by the double shutter drift tube, and compared the measured results by Hunter et al. with those. We determined the inelastic collision cross sections for the $C_{3}F_{8}$ molecule by the comparison of the present measurements and the calculation of electron transport coefficients in the $C_{3}F_{8}$-Ar mixtures by using a multi-term Boltzmann equation analysis.