Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Determination of Residual Stress by the Hole Drilling Method Based on Displacement Measurement

변위 측정을 기본으로 한 구멍뚫기방법에 의한 잔류응력 측정 방법

  • 신동일 (청주기계공업고등학교) ;
  • 주진원 (충북대학교 공과대학 기계공학과)
  • Published : 2005.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents the numerical procedure for calculating non-uniform residual stresses based on relieved displacements obtained from incremental hole drilling. The relationship between the in-plane displacement produced by introducing a blind hole and the corresponding residual stress is established. Finite element calculations are described to evaluate the relieved coefficients required for the determination of non-uniform residual stresses. Validity of the proposed method has been tested through three axisymmetric test examples and two three-dimensional examples. As a result of . simulation on the test examples, it is found that this numerical procedure is well adopted to measuring non-uniform residual stress in the full hole depth range of the hole diameter from the surface. The accuracy of the hole drilling method with displacement measurement is discussed, comparing tile method with strain measurement

Keywords

References

  1. Measurement Group, 1985, 'Measurement of Residual Stresses by the Hole-Drilling Strain Gage Method,' Measurement Group Tech Note, TN-503-1, pp. 1-15
  2. Mathar, J., 1934, 'Determination of Initial Stresses by Measuring the Deformation Around Drilled Holes,' Trans. ASME, Iron & Steel, Vol. 56, pp. 249-254
  3. Kelsey, R. H., 1956, 'Measuring Non-uniform Residual Stresses by the Hole Drilling Method, Proceedings of SESA, Vol. 14, No. 1, pp. 181-194
  4. Rendler, N. J. and Vigness, I., 1966, 'Hole-drilling Strain-gage Method of Measuring Residual Stresses,' Experimental Mechanics, Vol. 6, No. 12, pp. 577-586 https://doi.org/10.1007/BF02326825
  5. Bathgate, R. G., 1968, 'Measurement of Non -Uniform Biaxial Residual Stresses by the Hole Drilling Method,' Strain, Vol. 4, No. 2, pp. 20-29 https://doi.org/10.1111/j.1475-1305.1968.tb01353.x
  6. Niku-Lary, A., Lu, J. and Flavenot, J. F., 1985, 'Measurement of Residual Stress Distribution by the Incremental Hole-drilling Method,' Experimental Mechanics, Vol. 25, No. 9, pp. 175-185 https://doi.org/10.1007/BF02328809
  7. Flaman, M. T. and Manning, B. H., 1985, 'Determination of Residual Stress Variation with Depth by the Hole-Drilling Method,' Experimental Mech- anics, Vol. 25, No. 9, pp. 205-207 https://doi.org/10.1007/BF02325088
  8. Schajer, G. S., 1988, 'Measurement of Non-uniform Residual Stresses Using the Hole-drilling Method,' Trans. ASME, J. Eng. Mat. and Tech., Vol. 110, pp. 338-349 https://doi.org/10.1115/1.3226059
  9. Wem, H, 1995, 'Measurement of Non-uniform Residual Stresses Using the Hole Drilling Method, a New Integral Formalism,' Strain, Vol. 32, No. 2, pp. 63-67
  10. Joo, J. W. and Park, C. K, 1998, 'A study on Residual Stress Analysis by Finite Element Method In Hole-Drilling Method,' Trans. of the KSME A, Vol 22, No. 2, pp. 268-277
  11. Kim, C., Seok, C. S. and Yang, W. H., 2000, 'Influence of the Hole Eccentricity in Residual Stresses Measurement by the Hole-drilling Method,' KSME A, Vol 24, No. 8, pp. 2059-2064
  12. Young, W. C., 1989, ROARK'S Formulas for Stress and Strain, 6th ed., McGraw-Hill, Sigapore, pp. 391-442