• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.719-723
• /
• 2002

The purpose of this study is to suggest the correlation of single-number ratings for sound insulation by floor impact. As a assessment method of impact sound insulation. we selected the IIC contour of ISO, A weighted sound level. Inverse A-weighting curve and L-Index of japanese industrial standard. And we estimated the single-number ratings by application the measured data of impact sound level to each method. The results showed that the coefficients of determination between each two single-number ratings were very high (more than 0.9169). And In the condition of same assessment method, the coefficient of determination for light-weight impact sound was higher than that for heavy-weight impact sound.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.10a
• /
• pp.421-428
• /
• 1999

The elastic critical load of a slender compression member plays an important role when the proper design of that member is required. For the tapered compression members, however, there are cases when the conventional neutral equililbrium or energy method can't be applied to the determination of critical loads of those members. In this paper, finite element method is applied to the approximate determination of the symmetrically tapered bars. Here in this paper, the bars are assumed to take sinusoidally changing shapes along their axes. The parameters considered in this study are taper parameter, $\alpha$ and the sectional property parameter, m. The computed results by finite element method are represented in the forms of algebraic equations. Regression technique is employed to determine the coefficients of algebraic equations. The critical loads estimated by the proposed algebraic equations coincide fairly well with those of finite element method.

• International Journal of Highway Engineering
• /
• v.16 no.1
• /
• pp.21-30
• /
• 2014

PURPOSES : Evaluation of input parameters determination procedure for dynamic analysis of aggregates in DEM. METHODS : In this research, the aggregate slump test and angularity test were performed as fundamental laboratory tests to determine input parameters of spherical particles in DEM. The heights spreads, weights of the simple tests were measured and used to calibrate rolling and static friction coefficients of particles. RESULTS : The DEM simulations with calibrated parameters showed good agreement with the laboratory test results for given dynamic condition. CONCLUSIONS : It is concluded that the employed calibration method can be applicable to determine rolling friction coefficient of DEM simulation for given dynamic conditions. However, further research is necessary to connect the result to the behavior of aggregate in packing and mixing process and to refine static friction coefficient.

• The KSFM Journal of Fluid Machinery
• /
• v.20 no.2
• /
• pp.11-16
• /
• 2017

The accurate prediction of leakage flow through the brush element of brush seal at the steam turbine is important to find optimum design parameters for increasing an efficiency. In this study, CFD analysis method using commercial software FLUENT is proposed to predict leakage through the brush element. Since the brush element has a complex three-dimensional shape with many bristle assemblies, it is difficult to analyze the flow field. Therefore, if the brush element is assumed to be porous medium region, the analysis time can be shortened. Two determination methods of resistance coefficients of the Darcian porous medium equation are suggested. By comparing the 2D and 3D CFD analysis results for the leakage of the brush element using the two resistance coefficient determination methods, the effectiveness of the analysis for the porous medium assumption is proved.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.134.1-134.1
• /
• 2012

The radiation belt structure can be approximately reproduced by a form of diffusion equation, which takes into account the radial diffusion process as well as those in pitch angle and energy. The solution of the equation depends on several factors including initial and boundary conditions, diffusion coefficients, and plasmapause location. In this paper, we have attempted to determine a set of approximate functions for the energetic electron fluxes near the outer edge of the outer belt in terms of solar wind variable. We used the electron flux data from SST onboard the THEMIS spacecraft and determined its correlation with solar wind conditions in a systematic way. The functions were determined separately for different energy channels from ~30 keV up to 719 keV. Our determination of these functions allows us to predict the radial boundary condition for the electron flux, which can be implemented in a forecast model.

• Transactions on Electrical and Electronic Materials
• /
• v.2 no.1
• /
• pp.7-11
• /
• 2001

We measured the electron transport coefficients, the electron drift velocity, W, and the longitudinal diffusion coefficient, $D_{L}$, over the E/N range from 0.03 to 100 Td and gas pressure range from 0.133 to 122 kPa in the 0.526% and 5.05% $C_{3}F_{8}$-Ar mixtures by the double shutter drift tube with variable drift distance. And we calculated these electron transport coefficients by using multi-term approximation of Boltzmann equation analysis. We determined the electron collision cross sections set for $C_{3}F_{8}$ molecule by the comparison of measurement and calculation. Our special attention in the present study was focused upon the inelastic collision cross sections of the $C_{3}F_{8}$ molecule.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.299-302
• /
• 2003

The interface heat transfer coefficient was measured for non-isothermal bulk forming of Ti-6Al-4V. FE analysis and experiments were conducted. Equipment consisting of AISI H13 die was instrumented with thermocouples located at sub-surface of the bottom die. Die temperature changes were investigated in related to the process variables such as reduction, lubricant and initial die temperature. The calibration approach based on heat conduction and FE analysis using an inverse algorithm were used to evaluate the interface heat transfer between graphite-lubricated die and glass-coated workpiece. The coefficients determined determined were affected mainly by the contact pressure. The validation of the coefficients was made by the comparison between experimental data and FE analysis results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05c
• /
• pp.174-177
• /
• 2001

The electron transport coefficients, the electron drift velocity W, the longitudinal diffusion coefficient $ND_L$ and $D_L/{\mu}$, in pure Xe were calculated over the wide E/N range from 0.01 to 500 Td at 1 Torr by two-term approximation of the Boltzmann equation for determination of electron collision cross sections set and for quantitative characteristic analysis of Xe molecular gas.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05c
• /
• pp.182-185
• /
• 2001

The electron transport coefficients, the electron drift velocity W, the longitudinal diffusion coefficient $ND_L$ and $D_L/{\mu}$, in pure Ne were calculated over the wide E/N range from 0.01 to 300 Td at 1 Torr by two-term approximation of the Boltzmann equation for determination of electron collision cross sections set and for quantitative characteristic analysis of Ne molecular gas.

• Korean Journal of Veterinary Service
• /
• v.21 no.3
• /
• pp.261-266
• /
• 1998

A method for the determination of noboviocin in milk was presented by high performance liquid chromatography(HPLC). The novobiocin in the spiked sample was extracted with methanol and evaporated under vacuum. After evaporating, the residue was mixed with distilled water for 2$m\ell$, filtrates with 0.45$\mu\textrm{m}$ acrodisc was injected into HPLC. The results obtained were as follows ; 1. The calibration curve of novobiocin was showed constantly linear(r 0.999) in the range of 100~500ng/$m\ell$. 2. The mean recovery rate of novobiocin from the spiked milk sample were 88~98%. 3. The coefficients of variation were 2.6~5.8% 4. The lowest detectable limit of novobiocin was 25ppb.