• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.27 no.2
• /
• pp.243-250
• /
• 2017

In this study, single number rating methods of sound absorption coefficients are discussed. After that the sound absorption performance of noise barriers which are classified by Korea Standard are analyzed according to several standards. The existing rating methods such as NRC (noise reduction coefficient), SAA (sound absorption average) or ${\alpha}_w$ (weighted sound absorption coefficient) from ASTM C423, KS F 3505 and ISO 11654 are introduced. The sound absorption performance of noise barrier is evaluated to compare NRC and ${\alpha}_w$ value. When the value is over 0.6 there are large variance between NRC and ${\alpha}_w$ value. As results, it is needed to unify single number rating methods of sound absorption coefficients for Korean standards on sound absorbing materials.

• Journal of Korean Association for Spatial Structures
• /
• v.18 no.3
• /
• pp.125-132
• /
• 2018

The biggest impact on the cladding design of buildings is wind loads. Wind tunnel tests were conducted to examine the applicability of current wind load standards about membrane retractable roof spatial structure. A dome model with a circular shape that is retractable to the center of the dome was made (Opening ratio = 0, 10, 30, 50). In addition, height adjustable turntables were made and tested with five patterns with H/D = 0.1, 0.2, 0.3, 0.4 and 0.5. The maximum wind pressure coefficient and the minimum wind pressure coefficient for the cladding were analyzed and the experimental wind pressure coefficient were compared with the current wind load standards, KBC2016 and AIJ-RLB(2015). The experimental value and the reference value of the enclosed roof were very similar and showed possibility of application, but opened roof case was found that the reference value was underestimated.

• Advances in materials Research
• /
• v.11 no.1
• /
• pp.75-90
• /
• 2022

In this paper, functionality of soft computing algorithms such as Group method of data handling (GMDH), Random forest (RF), Random tree (RT), Linear regression (LR), M5P, and artificial neural network (ANN) have been looked out to predict the compressive strength of concrete mixed with marble powder. Assessment of result suggests that, the overall performance of ANN based model gives preferable results over the different applied algorithms for the estimate of compressive strength of concrete. The results of coefficient of correlation were maximum in ANN model (0.9139) accompanied through RT with coefficient of correlation (CC) value 0.8241 and minimum root mean square error (RMSE) value of ANN (4.5611) followed by RT with RMSE (5.4246). Similarly, other evaluating parameters like, Willmott's index and Nash-sutcliffe coefficient value of ANN was 0.9458 and 0.7502 followed by RT model (0.8763 and 0.6628). The end result showed that, for both subsets i.e., training and testing subset, ANN has the potential to estimate the compressive strength of concrete. Also, the results of sensitivity suggest that the water-cement ratio has a massive impact in estimating the compressive strength of concrete with marble powder with ANN based model in evaluation with the different parameters for this data set.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.371-374
• /
• 2006

The objective of this study is to determine the influence of free-stream turbulent intensity on the three-dimensional turbulent flow in a linear turbine cascade. The range of free-stream turbulence intensity considered is 0.7~10%. This study was performed numerically. The results show that the mass averaged loss coefficient increased according to the increase of free-stream turbulence intensity due to increased value of the mass averaged total pressure loss coefficient which was higher than the decreased value of the mass averaged secondary flow loss coefficient. The loss coefficient distribution was changed suddenly at a free-stream turbulence intensity of 10% while the loss coefficient distribution was rarely changed at a lower free-stream turbulence intensity of 5%.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.313-316
• /
• 2000

Wavelet transform has specific properties for image coding. The property used at this Paper is clustering of significant coefficients across subband. These coefficients are classified in significant coefficient and insignificant coefficient on a threshold value, and symbolized EZW decreases symbol-position information using zero-trees, but threshold value fall for raising resolution, then coding cost of significant coefficients is expensive. To avoid this fact, this paper uses quad-tree representing coefficient-position information. a magnitude of significant coefficient is represented on matrix used at EZW. the proposed algorithm is hoped for raising a coding cost.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.2 s.115
• /
• pp.16-21
• /
• 2006

Uneven ink transfer of a print can be traced to several causes such as an incomplete contact between the paper surface and ink film, a coarse pattern of a continuous ink film after transfer, uneven absorption, etc. Uneven ink transfer was studied in this points by the Tollenaar. Uneven distributions of printed density are reflected in low ${\ulcorner}m{\lrcorner}$ values of the print. Tollenaar's smoothness coefficient ${\ulcorner}m{\lrcorner}$ value was important factor that deciding printed quality which was easily obtain by densitometry. Limiting print density $D_{\infty}$ that obtained Tollenaar's formulation working as a influence factor at the printed quality. In this study, we obtained limiting print density $D_{\infty}$ and smoothness coefficient ${\ulcorner}m{\lrcorner}$ value of domestic newspapers and foreign newspapers. And we analyzed about properties of the newspaper. The result of this study, smoothness coefficient ${\ulcorner}m{\lrcorner}$ value and limiting print density $D_{\infty}$ showed the good results in the low porosity and low roughness newspaper. Datum which obtained by this study was used as printability factor for the quality control and improvement of domestic newspaper and wished to apply as a basic data for the domestic newspaper quality.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.88-94
• /
• 1999

Recently, PTFE-polyimide composites are being used self-lubricating parts for industrial field. Thus, this study is mainly concerned with friction and wear properties for the piston ring of non-lubricating air compressor which made of PTFE-polyimide composites. The friction and wear test was carried out for the different composition ratio under the atmosphere room temperature and constant load of 7.69N and their friction and wear properties were compared with each other at various sliding speed. Notable results are summarized as follows. PTFE 100% showed that friction coefficient was almost same values at 0.94 and 1.88m/s but the value was decreased at 2.83m/s because the friction temperature is higher than low speed. PTFE 80%-PI 20% showed the lowest mean friction coefficient at 2.83m/s. PTFE 20%-PI 80% showed the highest friction coefficient at 0.94m/s and the value was decreased at high speed but the value is higher than other materials except PTFE 100 %. PI 100% showed the highest friction coefficient at 0.94 and 1.88m/s because adhesive wear mainly occurred that speed. PTFE 100% showed highest specific wear rate on the whole. Specific wear rate of PTFE 80%-PI 20% was almost the same value with PTFE 20%-PI 80%. PI 100% showed the lowest value at high sliding speed because the friction surface was thicken and carbonated by high friction temperature.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.5
• /
• pp.636-643
• /
• 2009

This research was to find out what impacts do selection attributes of Jeju local folklore food by Jeju tourists provide on their behaviors. Multiple regression analysis was carried out using statistics package of SPSS+/WIN 12.0 to find out impacts of selection attribute factors of Jeju local folklore food on customers' satisfaction, re-visit, and intention by word of mouth. As the results, for factors with statistically meaningful impacts at the level of meaningfulness (p<0.05); level of satisfaction showed regression coefficient of 0.476 and t value of 5.198 in essential factors; auxiliary factors showed regression coefficient of 0.232 and t value of 2.808; and sensual (five senses) factors showed regression coefficient of 0.165 and t-value of 2.013. Also, for re-visit, essential factors showed impacts with regression coefficient of 0.413 and t-value of 3.540; factors of menu composition showed regression coefficient of 0.228 and t-value of 3.118; and auxiliary factors showed regression coefficient of 0.218 and t-value of 2.643. In positive word of mouth factors, auxiliary factors showed impacts with regression coefficient of 0.273 and t-value of 2.555; sensual (five senses) factors showed regression coefficient of 0.264 and t-value of 2.238; essential factor showed regression coefficient of 0.237 and t-value of 2.230 and factors of menu composition showed regression coefficient of 0.161 and t-value of 2.167. Therefore, in customer behaviors (customer satisfaction, re-visit, and positive word of mouth) regarding Jeju local folklore food by tourists who visited Jeju, local folklore and cultures did not impact on customer behaviors; also, it can suggested this thesis is meaningful as a study proving that the best marketing is focus on essential substances of food as indicated in existing researches.

• Journal of the Korean Home Economics Association
• /
• v.25 no.4
• /
• pp.85-97
• /
• 1987

The purpose of this study was to establish the hierarchy of housing values. Housing values were hygienic, safety, convenience of near environment, social affiliation oriented, self-actualization, aesthetic, and prestige. A final instrument was developed through two stage pilot surveys. The respondents were 1292 homemakers of middle and high economic class in Seoul and Daejeon, selected through stratified randon sampling technique. Data were collected during March and April 1986, and analyzed using SPSS and SAS computer packages. The statistics used were frequency, percentage, Guttman's reproducibility coefficient. The major finding were as follows; The hierachy of housing values was established with Guttman's coefficient of reproducibility. 94. Those were hygienic value, safety value, convenience of near environment value, aesthetic value, social affiliation oriented value, self-actualization value, prestige value in order.

• Journal of Astronomy and Space Sciences
• /
• v.34 no.2
• /
• pp.99-103
• /
• 2017

The sun is not equally bright over the whole sphere, but rather is darkened toward the limb. This effect is well-known as limb darkening. The limb darkening coefficient is defined by the ratio of the center intensity to limb intensity. In this study, we calculate the limb darkening coefficient using the photospheric intensity estimated from solar images taken by solar and helispheric observatory (SOHO) and solar dynamics observatory (SDO). The photospheric intensity data cover almost two solar cycles from May 1996 to December 2016. The limb darkening coefficient for a size of 0.9 diameter is about 0.69 and this value is consistent with solar limb darkening. The limb darkening coefficient estimated from SOHO shows a temporal increase at solar maximum and a gradual increase since the solar minimum of 2008. The limb darkening coefficient estimated from SDO shows a constant value of about 0.65 and a decreasing trend since 2014. The increase in the coefficient reflects the effect of weakened solar activity. However, the decrease since 2014 is caused by the aging effect.