• E2M - 전기 전자와 첨단 소재
• /
• 제10권6호
• /
• pp.533-540
• /
• 1997

The microwave dielectric properties of ((P $b_{1-x}$ C $a_{x}$)Zr $O_3$ and (P $b_{0.63}$,C $a_{0.37-x}$ $M_{x}$)Zr $O_3$(M=Mg,Sr) ceramics were investigated. In (P $b_{1-x}$ C $a_{x}$)Zr $O_3$ (X=0.33~0.40) ceramics, high quality factor and small temperature coefficient of resonant frequency were obtain in (P $b_{0.63}$C $a_{0.37}$)Zr $O_3$with perovskite structure. In the case of (P $b_{0.63}$C $a_{0.37-x}$M $g_{x}$)Zr $O_3$ dielectric constant temperature coefficient of resonant frequency increased and quality factor decreased due to increase of polarization of A-O bonding. When replacing Ca ion with Sr ion with large ion radius, polarization decreased with increased of bonding length and thus dielectric constant and temperature coefficient of resonant frequency decreased.decreased.creased.

• Tribology and Lubricants
• /
• 제34권4호
• /
• pp.132-137
• /
• 2018

Ultrasonic waves are used in various applications in multiple devices, sensors, and high-power machinery, such as processing machines, welders, and cleaners, because the acoustic vibration frequencies are above the human audible frequency range. In ultrasonic machining, electrical energy at a high frequency of 20 kHz or more is converted into mechanical vibration by a vibrator and an amplifier. This technique allows instantaneous separation between a tool and a workpiece during machining, machining by pulse impulse force at the time of re-contact and minimizes the minute elastic deformations of the workpiece and machine tools due to the cutting effect. The Al7075 alloy used in this study is a typical aluminum alloy with superior strength that is mainly used in aircrafts, automobiles, and sporting goods. To investigate the optimal conditions for machining aluminum alloy using ultrasonic vibration, the present experiment utilized the Taguchi orthogonal array method, and the coefficient of friction was analyzed using the characteristics of the Taguchi technique. In ultrasonic friction and abrasion tests, the changes in the friction coefficient were measured in the absence of ultrasonic vibrations and at 28 kHz and 40 kHz. As a result, the most considerable influence on the friction coefficient was found to be the normal load, and the frequency of ultrasonic vibrations increases, the coefficient of friction increases. It was thus confirmed that the amount of wear increases when ultrasonic vibration is applied.

• Journal of Power Electronics
• /
• 제19권2호
• /
• pp.580-590
• /
• 2019

The concept of virtual synchronous generators (VSGs) is a valuable means for improving the frequency stability of microgrids (MGs). However, a great virtual inertia in a VSG's controller may cause power oscillation, thereby deteriorating system stability. In this study, a small-signal model of an MG with two paralleled VSGs is established, and a control strategy for maintaining a constant inertial time with an increasing active-frequency droop coefficient (m) is proposed on the basis of a root locus analysis. The power oscillation is suppressed by adjusting virtual synchronous reactance, damping coefficient, and load frequency coefficient under the same inertial time constant. In addition, the dynamic load distribution is sensitive to the controller parameters, especially under the parallel operation of VSGs with different capacities. Therefore, an active power increment method is introduced to improve the precision of active power sharing in dynamic response. Simulation and experimental is used to verify the theoretical analysis findings.

• 한국컴퓨터정보학회논문지
• /
• 제4권1호
• /
• pp.76-84
• /
• 1999

본 논문은 주파수도약 확산스펙트럼 통신에 적용하기 위한 이중루프 간접 주파수 합성기에 대하여 연구하였다. 간접주파수합성 방법에서 PLL을 이용한 주파수합성기의 문제점으로는 주파수 변화에 따르는 댐핑 계수의 값 변화로 인하여 불안정한 주파수 발생 요인이 되고 있다. 따라서 안정한 주파수합성 출력을 위해서는 댐핑 계수를 최적화하고 과도응답 시간이 없는 시점에서 출력되어야 한다. 본 연구에서는 안정된 주파수를 얻기 위하여 이중루프 주파수합성기를 이용하여 FH/SS 통신을 위하여 적용하였다. 실험 결과를 통하여 주파수 도약을 위한 실시간 속도가 증가하였고, 안정된 주파수를 얻을 수 있었다.

• 조명전기설비학회논문지
• /
• 제20권10호
• /
• pp.35-40
• /
• 2006

이 논문에서는 주파수 가변형 무선 personal area network(PAN) 통신시스템 및 단말에 적용이 가능한 응용 회로로써, 탭계수(tap coefficient) 회로를 가변시련 수 있는 전류모드 아날로그 finite impulse response (FIR) 필터를 제안한다. 가변되는 7-tap FIR 필터의 동작은 컴퓨터 모의실험으로부터 확인하였고, $0.8[{\mu}m]$ CMOS 공정기술을 사용하여 0.0625-step 탭계수 회로가 제작되었다. 제안된 FIR 필터는 탭계수의 길이와 계수를 가변시킬 수 있기 때문에 주파수 가변형 무선 PAN통신 시스템 및 단말기에 적용 가능한 유용한 특성을 갖는다.

• 한국컴퓨터정보학회논문지
• /
• 제15권10호
• /
• pp.99-104
• /
• 2010

본 논문은 PIFA의 방사체와 접지면의 물리적 변화없이 안테나의 결합 계수와 공진 주파수를 조절할 수 있는 이동 통신 단말기용 내장형 안테나를 제안하였다. 제안된 안테나는 하나의 단락점에 추가된 인덕턴스에 따라 급전점과 단락점 사이의결합계수 뿐만 아니라 안테나의 공진 주파수도 조절한다. 제안된방법은 전계의 세기가 약한단락점에 인덕터를 연결하여 안테나의 성능 변화를 최소화 했다. PIFA의 단락점과 접지면 사이에 추가된 인덕터의 값이 0nH ~ 3.3nH로 변할 때 조절 가능한 공진 주파수 범위는 1650MHz ~ 1830MHz (약 180MHz)이고 인덕터의 값이 커질수록 안테나의 결합계수는 커진다. 이를 통하여 이동 통신 단말기의 형태 및 사용자의 환경에 따른 임피던스 및 공진 주파수의 변화를 전기적으로 조절하여 부정합에 의한 손실을 최소화했고 안테나 방사 성분의 어떠한 변형 없이 10%의 크기 감소효과를 얻을 수 있다. 1650MHz ~ 1830MHz의 주파수 영역에서 측정된 PIFA의 이득 감소는 0 ~ 3.3nH의 인덕터 값의 변화에 따라 0.93dB 이내이다.

• International Journal of Aeronautical and Space Sciences
• /
• 제13권1호
• /
• pp.27-33
• /
• 2012

The relationship between the excitation frequency and the vortex shedding frequency is analyzed during the oscillation of the circular cylinder. Two-dimension unsteady Navier-Stoke's equation is calculated by using the Optimized High Order Compact (OHOC) scheme. The flow condition is Mach number 0.3 and Reynold's number 1000. From the results acquired by calculation, it can be inferred that, when the excitation frequency is near the vortex shedding frequency at the fixed cylinder wake, the oscillation frequency of lift and drag coefficients appears to lock-on. The lock-on refers to a phenomenon in which the aerodynamic coefficient appears as one primary oscillation frequency through excitation and its amplitude is amplified. In the non-lock-on zone, the excitation frequency is not in the lock-on mode anymore and beat is formed in which two or more primary oscillation frequencies of the aerodynamic coefficient are mixed together.

• 센서학회지
• /
• 제22권6호
• /
• pp.379-386
• /
• 2013

The influences of the load resistance $R_L$ on the magnetoelectric (ME) characteristics of $NiZnFe_2O_4+PZT$ composite were investigated in the non-resonance frequency range. The ME coefficient peak increases with increasing $R_L$, but the frequency indicating the ME coefficient peak decreases with increasing $R_L$. The maximum output power peak is approximately $9.3{\times}10^{-10}mW/Oe$ near $R_L=3.3M{\Omega}$ at f=280 Hz, and the ME coefficient seems to be saturated at $R_L>20M{\Omega}$. This frequency shift effect of $R_L$ shows that the frequency range for an ME sensor application can be modulated with the appropriate value of $R_L$. The ME output voltage has a good linear response to the ac field Hac and shows fair stability over a range of temperatures. The measured non-linearity of this sample is approximately 0.8%. This sample will allow for a low-strength magnetic ac-field sensor. The result from this sample will serve as basic data for a signal-processing circuit system.

• 소음진동
• /
• 제9권6호
• /
• pp.1123-1130
• /
• 1999

A system which is composed of a membrane and an air cavity is studied. To analyze the low frequency characteristics of a single membrane-cavity system, a plane wave model is derived. The relations among system variables, such as tension, density and stiffness, are investigated. Absorption coefficient has a maximum value at a peak frequency. In addition, a membrane-cavity system absorbs the low frequency noise with a band around peak frequency. This band is primarily determined by damping effect of the system. Furthermore, a multiple membrane-cavity system is investigated by using the transfer matrix method. To show the practical applicability of the proposed model, extensive experiments were conducted. Results show that a multiple membrane-cavity system can have broader noise reduction in the low frequency range than single.

• 한국기계가공학회지
• /
• 제19권5호
• /
• pp.38-44
• /
• 2020

Surface texturing of micro-dimples has been used in many manufacturing industries to reduce friction between two sliding contacted surfaces. Surface texturing decreases the frictional force owing to minimizing of the sliding contact area. In this paper, micro-dimples have been fabricated on an Al6061-T6 surface using a two-frequency elliptical vibration texturing (TFEVT) method. A high-frequency of 18 kHz and low-frequency of 250 Hz were applied to an elliptically-vibrated tool holder. The Stribeck curve was plotted to analyze the friction coefficient trends. Furthermore, the representative wetting index, such as the water contact angle (WCA), was measured by considering the friction coefficient. WCA is associated with micro-dimple density and associated parameters. Consequently, the dimpled surfaces with a low friction coefficient exhibited a relatively high WCA in the feed direction. According to the Stribeck curve, the dimpled surfaces demonstrate superior friction performance for mixed-film lubrication compared to the non-textured surface.