• Wind and Structures
• /
• v.3 no.1
• /
• pp.59-67
• /
• 2000

The cruciform shaped mast over 47 storey, Telecom Corporate Building in Melbourne, Australia rises to a height of approximately 25 m above the roof level. As the members are subjected to very high fluctuating loads under wind, the design was mainly governed by wind-induced fatigue. A detailed fatigue analysis was carried out according to the requirements of the Australian Steel Structures Code, AS4100. The wind-induced fatigue analysis procedure is described in the paper. The fatigue design of this mast is used as an example to illustrate some potential problems of relevant specifications in AS4100 and to outline some of the more important parameters in the fatigue analysis.

• Steel and Composite Structures
• /
• v.25 no.1
• /
• pp.45-55
• /
• 2017

Stainless steel exhibits high ductility and strain hardening capacity in comparison with carbon steel widely used in constructions. To analyze the particular behaviour of stainless steel cover-plate joints, an experimental study was conducted. It showed large ductility and complex failure modes of the joints. A non-linear finite element model was developed to predict the main parameters influencing the behaviour of these joints. The results of this deterministic model allow us to built a meta-model by using the quadratic response surface method, in order to allow for efficient reliability analysis. This analysis is then applied to the assessment of design formulae in the currently used codes of practice. The reliability analysis has shown that the stainless steel joint design according to Eurocodes leads to much lower failure probabilities than the Eurocodes target reliability for carbon steel, which incites revising the resisting model evaluation and consequently reducing stainless steel joint costs. This approach can be used as a basis to evaluate a wide range of steel joints involving complex failure modes, particularly bearing failure.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.1
• /
• pp.113-132
• /
• 2005

With the demand for free-range products increasing and the pressure on the intensive poultry industry to improve poultry welfare especially in western countries, the number of free-range poultry farms has increased significantly. The USA, Australia and European countries have developed Codes of Practice for free-range poultry farming which detail the minimum standards of husbandry and welfare for birds. However, the performance and liveability of free-range birds needs to be improved and more knowledge is required on bird husbandry, feed supply, disease control and heat wave management. This review examines the husbandry, welfare, nutrition and disease issues associated with free-range poultry systems and discusses the potential of incorporating free-range poultry into a crop-pasture rotation system.

• Journal of Information Science Theory and Practice
• /
• v.6 no.1
• /
• pp.18-30
• /
• 2018

Interest in open data is continuing to grow around the world. In particular, open government data are considered an important element in securing government transparency and creating new industrial values. The South Korean government has enacted legislation on opening public data and provided diversified policy and technical support. However, there are also limitations to effectively utilizing open data in various areas. This paper introduces an administrative district knowledge model to improve the sharing and utilization of open government data, where the data are semantically linked to generate a knowledge graph that connects various data based on administrative districts. The administrative district knowledge model semantically models the legal definition of administrative districts in South Korea, and the administrative district knowledge graph is linked to data that can serve as an administrative basis, such as addresses and postal codes, for potential use in hospitals, schools, and traffic control.

• Agribusiness and Information Management
• /
• v.5 no.1
• /
• pp.11-19
• /
• 2013

Price skimming practices, false claim on products, false information/communication, marketing overseas, and deception on products in marketing have received significant attention by the researchers of ethics in marketing studies. This research considers these phenomena as marketing instruments that grossly violate the practice of ethics in this domain. The two most crucial parts in marketing that have received greater attention are product safety and advertising. The paper also examines Ethical Marketing as the ability to make marketing decisions that are morally right and acceptable to all. In order words, ethics in marketing explains how moral standards can be applied in marketing decisions. It seeks to answer the research question by looking at some fundamental business ethics theories, namely, Virtue ethics, Utilitarian, and Deontological approaches to business ethics. Nevertheless, ethics in business is very controversial as many hold different view about what makes up the standard morals that corporations should take and so it is necessary for any organization to formulate its ethical codes to follow.

• Steel and Composite Structures
• /
• v.46 no.2
• /
• pp.175-193
• /
• 2023

Stainless steel-concrete composite beam has become an attractive structural form for offshore bridges and iconic high-rise buildings, owing to the superior corrosion resistance and excellent ductility of stainless steel material. In a composite beam, stainless steel shear connectors play an important role by establishing the interconnection between stainless steel beam and concrete slab. To enable the best use of high strength stainless steel shear connectors in composite beams, high strength concrete is recommended. To date, the application of stainless steel shear connectors in composite beams is still very limited due to the lack of research and proper design recommendations. In this paper, a total of seven pushout specimens were tested to investigate the load-slip behaviour of stainless steel shear connectors. A thorough discussion has been made on the differences between stainless steel bolted connectors and welded studs, in terms of the failure modes, load-slip behaviour and ultimate shear resistance. In parallel with the experimental programme, a finite element model was developed in ABAQUS to simulate the behaviour of stainless steel shear connectors, with which the effects of shear connector strength, concrete strength and embedded connector height to diameter ratio (h/d) were evaluated. The obtained experimental and numerical results were analysed and compared with existing codes of practice, including AS/NZS 2327, EN 1994-1-1 and ANSI/AISC 360-16. The comparison results indicated that the current codes need to be improved for the design of high strength stainless steel shear connectors. On this basis, modified design approaches were proposed to predict the shear capacity of stainless steel bolted connectors and welded studs in the composite beams.

• Journal of Nutrition and Health
• /
• v.54 no.2
• /
• pp.129-138
• /
• 2021

To set the estimated energy requirement (EER) in Dietary Reference Intakes for Koreans (KDRI), we need the coefficient by physical activity stage, as determined by the physical activity level(PAL). Thus, there has been demand for a tool to calculate PAL based on the physical activity diary. This study was undertaken to develop a physical activity (PA) classification table for Koreans, using the 2011 Compendium of physical activities in the United States. The PA classification table for Koreans contains 262 codes, and values of the metabolic equivalent of task (MET) for specific activities. Of these, 243 PAs which do not have Korean specific data or information, were selected from the 2011 Compendium of PAs that originated in the United States; another 19 PAs were selected from the previous research data of Koreans. The PA classification table is codified to facilitate the selection of energy values corresponding to each PA. The code for each PA consists of a single letter alphabet (activity category) and four numeric codes that display the activity type (2 digit number), activity intensity (1 digit number), and specific activities (1 digit number). In addition, the intensity (sedentary behavior, low, middle and high) of specific PA and its rate of energy expenditure in MET are presented together. The activity categories are divided into 4 areas: Daily Activity (A), Movement (B), Occupation (C), and Exercise and Sports (D). The developed PA classification table can be applied to quantify the energy cost of PA for adults in research or practice, and to assess energy expenditure and physical activity levels based on self-reported PA.

• Journal of radiological science and technology
• /
• v.47 no.2
• /
• pp.107-116
• /
• 2024

In this study, we analyzed the use of general radiography imaging and effective dose in inpatients. Our aim is to help reduce national medical radiation exposure doses and develop rational health-care financial policies. The effective dose for each general radiography was calculated using the ALARA-GR program for 53 types (total: 260 codes) general radiography codes selected from 'National Health Insurance Care Benefit Cost'. The usage of general radiography was analyzed in the 2018 inpatient patient data of the Health Insurance Review and Assessment Service, and the effective dose for each general radiography was analyzed. 89.00% of inpatients undergo general radiography imaging at least once, with an average of 12.63 scans per person and an effective dose of 1.00 mSv. Those who received support from Medical Aid showed a higher value compared to those who were insured by National Health Insurance, with 17.39 cases and 1.43 mSv (p<.001). Chest had the highest usage rate at 23.12% for general radiography imaging, while L-spine had the highest effective dose at 24.53%. It is estimated that 420 inpatients patients undergo 121 to 820 general radiography imaging procedures per year, and 233 inpatients are estimated to have an annual effective dose of >20.00~58.25 mSv. Rational use of health-care finances and the practice of medical radiation safety management are essential for the well-being of individuals, the enhancement of quality of life, and the improvement of health-care quality.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2289-2297
• /
• 2014

There were a lot of attempts in the army to use various domestic thematic maps, but attribute data types of military topographic analysis maps use the FACC of DIGEST, so there is a limit in employing domestic thematic maps with different types of attribute codes. Therefore, this study analyzed the FACC as a data attribute based on the MIL-PRF-89040 of the US Army. Then, VITD was created by changing the attribute codes of domestic thematic maps produced in Korea to fit the FACC. Lastly, it was applied to the analysis of cross-country movement for maneuver defined in FM 5-33 in order to verify if it is applicable in practice. As a result, it was found that the suggested method was helpful in securing the cross-country movement for maneuver. This means that this method can be used not only in producing military topographic analysis maps using domestic thematic maps but in constructing emergency transport routes roads to transport by-products of forest in future.

• Journal of Information Technology Services
• /
• v.11 no.4
• /
• pp.251-262
• /
• 2012

Unit testing is one of the test levels, which tests an individual unit or a group of related units. Recently, in Agile Development or Safety-critical System Development, the unit testing plays an important role for the qualities. According to the definition of unit testing, it is supposed to be done by the developers of units. That is because test models for the unit testing refers to the structure of units, and others but its original developers hardly can understand the structures. However, in practice, unit testing is often asked to be done without the original developers. For example, it is when faults are revealed in customer sites and the development team does not exit any more. In this case, instead of original developers, other developers or test engineers take a product and test it. The unit testing done by a non-developer, who is not the original developer, would cause some difficulties or cause more cost. In this paper, we tests an open source, JTopas, as a non-developer, with building test models, implementing test codes, and executing test cases. To fit this experiment to practical testing situations, we designed it based on the practices of unit testing, which were surveyed through SPIN(Software Process Improvement Network). This paper analyzes which part of unit testing done by non-developers needs more effort compared to the unit testing done by original developers. And it concludes that Agile Development contributes on reducing the extra effort caused by non-developers, since it implements test codes first before developing source code. That means all the units have already included their own tests code when they are released.