• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6C
• /
• pp.505-511
• /
• 2008

The global navigation satellite system (GNSS) is using a direct sequence/spread spectrum (DS/SS) modulation. In order to recover the information data, the DS/SS system first performs a two-step synchronization process: acquisition and tracking. The acquisition process adjusts the phase difference between the received and locally generated acquisition sequences within ${\pm}T_c/2$ or less, where $T_c$ is the chip period. The tracking process performs fine synchronization. In this paper, we focus on the tracking issue. The single delta delay locked loop($\Delta$-DLL) is the optimal tracking scheme for a GNSS in the absence of multipath signals, where $\Delta$ means the spacing between the early and late correlation time offset. In the multipath environments, however, the $\Delta$-DLL suffers from huge estimation bias(denoted by $\beta$) caused by distorted correlation values. Although some modified schemes such as a $\Delta$-DLL with a narrow $\Delta$ and a double delta DLL (${\Delta}^{(2)}$-DLL) were proposed to reduce the estimation bias, they cannot remove the estimation bias completely and need more accurate acquisition process. This paper proposes a novel tracking scheme that can dramatically reduce the estimation bias, using the maximum slope change among the correlation outputs.

• Journal of Advanced Navigation Technology
• /
• v.15 no.1
• /
• pp.32-38
• /
• 2011

In this paper, code and carrier tracking error which resulted from spoofing signal was analyzed by simulation. For a start, the types of spoofing signals and methods were classified. For the simulation, search spoofing method is assumed because a perfect position and velocity are not generally informed to spoofing device. In most cases, the tracking error is increased but a complete deception does not happen because of the inherent anti-spoofing characteristics of the GPS signal.

• Journal of the Korean Ceramic Society
• /
• v.56 no.5
• /
• pp.421-434
• /
• 2019

We face many fascinating and diverse challenges, the most important among which is to determine how to store a large amount of information with novel approaches. Info-convergence ceramic nanosystems, which combine ceramic materials science and information technology, may provide an attractive alternative. This review considers recent multidisciplinary advances in the development of info-convergence nanosystems based on ceramic materials and discusses various strategies under ceramic-based information systems with a special focus on materials and nanohybridization technologies. Ceramic materials have played diverse roles not only as the generic coding support, but also as the central coding substance. The review highlights the ceramic nanohybrid bio code and ceramic nanoparticle optical code for applications in tracking-and-traceability management, nano-forensics, anti-counterfeiting, and even communication, as well as the four steps of encoding, encrypting, decrypting, and decoding for the desired applications. Additionally, associated challenges, potential solutions, and perspectives for future developments in the field are discussed.

• The Journal of the Korea Contents Association
• /
• v.14 no.12
• /
• pp.545-554
• /
• 2014

In this paper, we propose online Chinese character learning machine with a depth camera, where a system presents a Chinese character on a screen and a user is supposed to draw the presented Chinese character by his or her hand gesture. We develop the hand tracking method and suggest the adjusted chain code to represent constituent strokes of a Chinese character. For hand tracking, a fingertip is detected and verified. The adjusted chain code is designed to contain the information on order and relative length of each constituent stroke as well as the information on the directional variation of sample points. Such information is very efficient for a real-time match process and checking incorrectly drawn parts of a stroke.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.4
• /
• pp.622-628
• /
• 2012

This paper proposes an environment monitoring algorithm using a behavior-based multiple robot system. This paper handles an escort and a boundary-tracking especially. Unlike previous research works, the proposed environment monitoring system which is based on the behavior-based multiple robot control allows the system to employ the reusable code and general algorithm. Also, the proposed method can be applied to cheaper process with low performances. In the proposed method, escort and boundary-tracking missions are constructed by weighted sum of predefined basic behaviors after redefining the basic behaviors in previous works and introducing the novel basic behavior. Simulation results of the proposed method are included to demonstrate the practical application of the proposed algorithm.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.299-302
• /
• 2006

We present an innovative means of numerically treating interfaces associated with chemically active energetic materials. Recent advances in wave tracking technique based on the Ghost Fluid Concept is extended to handle multi-material multi-phase interfaces associated with chemical environment associated with explosion. We show several work-in-progress applications of our code, including the impact problems involving both energetic and inert elements. Accurate modeling of the equation of state and the constitutive relations are also discussed

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.1
• /
• pp.15-24
• /
• 2000

Stand-alone global position system receiver based on C/A code tracking generates position error of 100m mainly due to the selective availability and ionospheric and tropospheric delay errors. The differential GPS is the most commonly used method for removing those bias range error components. The relative GPS, although somewhat restrictive in its use, is ideally suited to the car monitoring system for improved Automatic Vehicle location, especially where the DGPS infrastructure is not available. The RGPS does not require any additional hardware, facility or external infrastructure and can be operated within the system with existing host computer and communication link. This paper presents detailed description of the RGPS concept and its implementation for real-time data processing. Performance of RGPS is evaluated with real data and is compared with DGPS.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.3
• /
• pp.306-312
• /
• 2013

Doubly fed induction generator (DFIG) systems widely used globally are highly sensitive to the grid disturbance due to the structure that the stator is connected to the grid. In the past, when a grid fault occurs in order to prevent a system, generators are separated from the grid regardless of the fault duration time. Recently, however, the grid connection standards(Grid Code)says that for the failures removed within a certain time, the generator remains operation without separating from the grid. This paper proposes a new flux tracking LVRT(Low-Voltage Ride Through) control based on system modeling equations. The validity of the proposed strategy has been demonstrated by computer simulations.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.414-414
• /
• 2004

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.2
• /
• pp.137-145
• /
• 1989

In this paper we consider the design of bent sequence generators employing a modified bent function. Through the experimental results and simulation, we show that the period of sequences is $2^n$-1, the number of sequences in the set is $2n/2$, the largest magnitude of correlation is $2n/2$+1, and the sequence generators easy to randomly initialize into any assigned code and hence can be rapidly hopped from sequence to sequence. And we construct a code synchronization system with bent sequence generator as the local code generator, a sliding correlator and DLL as the acquisition subsystem and the tracking subsystem, respectively for DS-CODA, and verify the experimenta results for accomplishing code synchronism.