• 제목/요약/키워드: code switch

검색결과 50건 처리시간 0.011초

컨베이어 사고 예방을 위한 풀 코드 스위치 적용기준 개선 (Improvement of Application Criteria of Pull Code Switch for Conveyor Accident Prevention)

  • 서재민;박지훈;백종배
    • 한국안전학회지
    • /
    • 제34권5호
    • /
    • pp.153-158
    • /
    • 2019
  • It is estimated that about 2,515 persons have been injured by conveyor for the past five years(2013 ~ 2017). Conveyors used in various industrial sites for transporting iron ore, coal, courier goods, etc., have various incidents such as a worker putting on or pulling a part of the body or work clothes on the driving part during maintenance. It is necessary for preventing similar accidents to conduct various researches. In order to propose the basis for revising laws and standards for the safety standards of the full cord switch to prevent conveyor accidents, this study compares Korea's Industrial Safety and Health Law (KISHL) with those of IEC, EN, Canada, and Australia. In addition, surveys of conveyor use plant and full cord switch domestic and foreign manufacturers was conducted. In this study, domestic and overseas related laws and technical standards compare and analyze to prevent conveyor accidents. In addition, we propose extension of safety certification for full code switch, establishment of safety inspection standard, and improvement of working method regulation through actual working condition investigation. It can be used as a basis for revising the occupational safety and health regulation and related notices, and thus contributing to enhancing the safe atmosphere of the conveyor business and improving the safety consciousness of the concerned persons.

보조선을 사용하지 않은 Sequence Switch Coding 회로의 설계 (Design of A Sequence Switch Coding Circuit Without Using Auxiliary Lines)

  • 윤명철
    • 대한전자공학회논문지SD
    • /
    • 제46권11호
    • /
    • pp.24-33
    • /
    • 2009
  • 코딩정보의 전송을 위하여 보조선에서 발생하는 오버헤드전이는 Sequence Switching Code (SSC) 알고리즘의 확장성을 제한하는 가장 큰 걸림돌이 되어왔다. 본 논문에서는 보조선을 사용하지 않고 SSC 회로를 구현하는 방법과 함께 이 방법을 사용하여 보조선을 사용하였을 때 보다 오버헤드전이를 적게 발생시키는 방법을 제시하였다. 실험결과 새로운 방법을 적용함으로써 보조선을 사용하는 방식에 비하여 오버헤드전이의 발생을 50% 이하로 줄이고 알고리즘의 효율을 약 30% 향상시킬 수 있었다.

스위치네트워크와 연동에 의한 이동통신용 반향제거장치 구현 (Implementation of echo canceller for mobile communications interworking switch network)

  • 오돈성;이두수
    • 한국통신학회논문지
    • /
    • 제21권8호
    • /
    • pp.2033-2042
    • /
    • 1996
  • In this papre, we describe a recently implemented echo canceller for digital cellular communication of Code Division Multiple Access(CDMA) that features time sharing of digital signal processor(DSP) over four channels in one DSP to reduce per channel costs. In the Public Land Mobile Network(PLMN), it is important to cancel the echo reflected from the Public Switched Telephone Network(PSTN) side. In case of digital mobile system, the round-trip delay of the echo is in excess of about 180 milliseconds due to frame-by-frame voice coding. It is necessary to cancel the echo in PLMN. We have developed a multi-channel echo canceller tht operates with Time Switch Module in a Mobile Switching Center(MSC). The general echo canceller needs PCM trunk interface circuits and the tone detection and disabling circuits, but the multi-channel echo canceller linked with Time Switch Module does not need them. Therefore we could develop the effective and economical echo canceller.

  • PDF

CAM을 활용한 인히비터 스위치 가공 (Manufacture of Inhibitor Switch using CAM)

  • 김세환;이종선;김정훈
    • 한국산학기술학회논문지
    • /
    • 제5권1호
    • /
    • pp.49-54
    • /
    • 2004
  • 본 논문은 자동차용 자동변속기의 변속전환 핵심 부품인 인히비터 스위치 케이스를 CAM을 활용하여 직접 제작하였다. 자동차 부품의 대부분은 주조로 만들어 대량생산과 복잡한 형상의 가공이 용이하지만 기계적 성질의 저하, 정밀도의 저하, 환경의 문제, 후처리를 해야하는 문제점이 있다. 이러한 문제점을 해결하기 위하여 CAM을 활용하여 제작함으로서 새로운 가공 방향을 제시하였다.

  • PDF

병렬 CRC코드 생성기 및 Syndrome 계산기의 구현 (Implementation of Parallel Cyclic Redundancy Check Code Encoder and Syndrome Calculator)

  • 김영섭;최송인;박홍식;김재균
    • 한국통신학회논문지
    • /
    • 제18권1호
    • /
    • pp.83-91
    • /
    • 1993
  • 디지틀 전송 시스팀에서 순방향 에러 제어(Forward Error Control) 방식으로 에러를 검출할 수 있는 성능과 구현의 용이함에 의해 Cyclic Redundancy Chedk(CRC) code가 널리 사용도고 있다. 즉, 간단한 몇개의 shift register와 modulo2 가산기를 이용하여 회로를 구성하고 입력 데이터 열을 직렬로 입력하면 최종적으로 shift register에 남아 있는 값이 CRC code가 되어 입력 데이터 열을 전송한 뒤 shift register의 값들을 순차적으로 전송하는 방식으로 전성 사의 에러를 검출하고 수정한다. 그러나 전송속도가 높아짐에 따라 직렬 데이터를 이용하여 CRC code를 생성하는 회로를 구현하는 것은 반도체 소자의 속도 제약 때문에 많은 어려움이 따른다. 따라서 본 논문에서는 주문형 반도체 개발시 반도체 소자의 속도 제약 문제를 해소하기 위하여 입력데이터 열을 병렬로 입력하여 직렬로 수행하는 방식과 동일한 방식으로 동작하는 병렬 CRC code 생성방식 및 syndrome 계산방식을 제안하였다.

  • PDF

광 스위치를 이용한 광 CDMA 방식에 의한 광 가입자 액세스 망의 제안 (Proposal of optical subscriber access network using optical CDMA method with optical switches)

  • 박상조;김봉규
    • 정보처리학회논문지C
    • /
    • 제10C권3호
    • /
    • pp.317-324
    • /
    • 2003
  • PN 부호와 광 스위치를 사용하여 시간영역에서 확산하는 CDMA 방식에 의한 광 가입자 액세스 망을 제안한다. 무선통신에 널리 사용되는 PN 계열 부호를 사용하여 양극성(bipolar) 데이터를 수신측에서 상관할 수 있는 구조를 제안한다. 광 스위치의 ON/OFF를 통하여 PN 부호를 소프트웨어적으로 구성할 수 있어 광 가입자에 배분할 수 있는 부호계열의 수가 증가 증가하고, 부호 배분에 있어서 유연성을 갖고 있다. 그리고 이론적으로 제안한 광 가입자 액세스 망의 성능을 해석하고 종래의 광섬유 형 정합필터를 이용한 광 CDMA 방식을 적용한 광 가입자 액세스 망에 비하여 성능이 향상됨을 수치 계산을 통하여 명확히 한다.

Telemetry PCM Encoder의 개발연구 (Experimental Development of the PCM Encoder for Telemetry)

  • 강정수;이만영
    • 한국통신학회논문지
    • /
    • 제9권1호
    • /
    • pp.1-10
    • /
    • 1984
  • 時分割多重化方式에 의한 Telemetry用 PCM encoder를 塔載型遠幅測定에 適合하도록 國産化開發硏究를 追究하였다. Program switch에 의하여 選擇되는 PCM encoder의 analog人力채널은 0~64word/frame($\pm$5V full scale), discrete人力은 0~30bit(5V$\pm$1V or 0V$\pm$1V dc)이며 bit rate는 70 및 140Kbit/sec, 分解能力은 8~12bit/word를 選擇할 수 있다. 그리고 filtered output code는 5次Bessel型LPF($f_{c}$=100kHz)를 통한 NRZ-L 및 Bi$\phi$=S이며 PCM encoder의 시스템誤差는 full scale에 대하여 最大 $\pm$0.2%이다.

  • PDF

고속 3×3 스위치를 이용한 Benes 네트워크 기반 Multi-Size Circular Shifter (Multi-Size Circular Shifter Based on Benes Network with High-Speed 3×3 Switch)

  • 강형주
    • 한국정보통신학회논문지
    • /
    • 제19권11호
    • /
    • pp.2637-2642
    • /
    • 2015
  • Low-density parity-check(LDPC) 코드는 그 탁월한 에러 정정 능력으로 인해 많은 통신 표준에서 사용되고 있다. 여러 종류의 LDPC 코드 중 quasi-cyclic LDPC(QC-LDPC) 코드가 많이 사용되는데 QC-LDPC 코드의 복호기에는 여러 크기의 rotation을 수행할 수 있는 multi-size circular shifter(MSCS)가 필요하다. MSCS의 구현 방법 중 Benes 네트워크에 기반한 구조가 많이 사용되는데, rotation할 데이터의 개수가 3의 배수일 경우에는 $3{\times}3$ 스위치가 필요하다. 이 논문에서는 기존의 제어 신호 생성에 비해 복잡도가 줄어든 생성법과 기존의 $3{\times}3$ 스위치 구조 보다 더 빨리 동작할 수 있는 $3{\times}3$ 스위치 구조를 제안한다. IEEE 802.16e WiMAX 표준에서 사용되는 QC-LDPC 코드 복호기의 MSCS 에 적용하여 지연 시간을 8.7% 정도 줄이고 면적도 조금 감소시켰다.

멀티프로그래밍 환경에서의 분기 예측 (Branch Prediction in Multiprogramming Environment)

  • 이문상;강영재;맹승렬
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제26권9호
    • /
    • pp.1158-1165
    • /
    • 1999
  • 조건부 분기 명령어(conditional branch instruction)의 잘못된 분기 예측(branch misprediction)은 프로세서의 성능 향상에 심각한 장애 요인이 되고 있다. 특히 시분할(time-sharing) 시스템과 같이 문맥 교환(context switch)이 발생하는 멀티프로그래밍 환경(multiprogramming environment)에서는 더욱 낮은 분기 예측 정확성(branch prediction accuracy)을 보인다. 본 논문에서는 문맥 교환이 발생하는 멀티프로그래밍 환경에서 높은 분기 예측 정확성을 보이는 중첩 분기 예측표 교환(Overlapped Predictor Table Switch, OPTS) 기법을 소개한다. 분기 예측표(predictor table)를 분할하여 각각의 프로세스(process)에 할당하는 OPTS 기법은 문맥 교환의 영향을 최소화함으로써 높은 분기 예측 정확성을 유지하는 분기 예측 방법이다.Abstract There is wide agreement that one of the most important impediments to the performance of current and future pipelined superscalar processors is the presence of conditional branches in the instruction stream. Accurate branch prediction is required to overcome this performance limitation. Many branch predictors have been proposed to help to alleviate this problem, including the two-level adaptive branch predictor, and more recently, hybrid branch predictor. In a less idealized environment, such as a time-sharing system, code of interest involves context switches. Context switches, even at fairly large intervals, can seriously degrade the performance of many of the most accurate branch prediction schemes. In this study, we measure the effect of context switch on the branch prediction accuracy in various situation and show the feasibility of our new mechanism, OPTS(Overlapped Predictor Table Switch), which save and restore branch history table at every context switch.

이중언어환경에서의 언어간 부호전환 수준에 따른 차별적 신경활성화 과정: ERP연구 (Differential Effect for Neural Activation Processes according to the Proficiency Level of Code Switching: An ERP Study)

  • 김충명
    • 말소리와 음성과학
    • /
    • 제2권4호
    • /
    • pp.3-10
    • /
    • 2010
  • The present study aims to investigate neural activations according to the level of code switching in English proficient bilinguals and to find the relationship between the performance of language switching and proficiency level using ERPs (event-related potentials). First, when comparing high-proficient (HP) with low-proficient (LP) bilingual performance in a native language environment, the activation level of N2 was observed to be higher in the HP group than in the LP group, but only under two conditions: 1) the language switching (between-language) condition known as indexing attention of code switching and 2) the inhibition of current language for L1. Another effect of N400 can be shown in both groups only in the language non-switching (within-language) condition. This effect suggests that both groups completed the semantic acceptability task well in their native language environment without the burden of language switching, irrespective of high or low performance. The latencies of N400 are only about 100ms earlier in the HP group than in the LP group. This difference can be interpreted as facilitation of the given task. These results suggest that HP showed the differential activation in inhibitory system for L1 in switching condition of L1-to-L2 to be contrary to inactivation of inhibitory system for the LP group. Despite the absence of an N400 effect at the given task in both groups, differential latencies between the peaks were attributed to the differences of efficiency in semantic processing.

  • PDF