• Journal of the Korean Society of Safety
• /
• v.34 no.5
• /
• pp.153-158
• /
• 2019

It is estimated that about 2,515 persons have been injured by conveyor for the past five years(2013 ~ 2017). Conveyors used in various industrial sites for transporting iron ore, coal, courier goods, etc., have various incidents such as a worker putting on or pulling a part of the body or work clothes on the driving part during maintenance. It is necessary for preventing similar accidents to conduct various researches. In order to propose the basis for revising laws and standards for the safety standards of the full cord switch to prevent conveyor accidents, this study compares Korea's Industrial Safety and Health Law (KISHL) with those of IEC, EN, Canada, and Australia. In addition, surveys of conveyor use plant and full cord switch domestic and foreign manufacturers was conducted. In this study, domestic and overseas related laws and technical standards compare and analyze to prevent conveyor accidents. In addition, we propose extension of safety certification for full code switch, establishment of safety inspection standard, and improvement of working method regulation through actual working condition investigation. It can be used as a basis for revising the occupational safety and health regulation and related notices, and thus contributing to enhancing the safe atmosphere of the conveyor business and improving the safety consciousness of the concerned persons.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.11
• /
• pp.24-33
• /
• 2009

The transition of auxiliary lines for transmitting coding information has been one of the major obstacles to restricting the scalability of Sequence Switch Coding (SSC) algorithms. A new design of SSC which does not use auxiliary lines is presented in this paper. The new design makes overhead transitions far less than the previous designs that use auxiliary lines. By applying the new technique, more than 50% of overhead transitions have been reduced, leading to the increase of 30% of the overall efficiency of SSC algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.8
• /
• pp.2033-2042
• /
• 1996

In this papre, we describe a recently implemented echo canceller for digital cellular communication of Code Division Multiple Access(CDMA) that features time sharing of digital signal processor(DSP) over four channels in one DSP to reduce per channel costs. In the Public Land Mobile Network(PLMN), it is important to cancel the echo reflected from the Public Switched Telephone Network(PSTN) side. In case of digital mobile system, the round-trip delay of the echo is in excess of about 180 milliseconds due to frame-by-frame voice coding. It is necessary to cancel the echo in PLMN. We have developed a multi-channel echo canceller tht operates with Time Switch Module in a Mobile Switching Center(MSC). The general echo canceller needs PCM trunk interface circuits and the tone detection and disabling circuits, but the multi-channel echo canceller linked with Time Switch Module does not need them. Therefore we could develop the effective and economical echo canceller.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.1
• /
• pp.49-54
• /
• 2004

This paper is purpose to manufacture of inhibitor switch using CAM systems. CAM systems are consist of CAD(AutoCAD), CAM(Omega) software and CNC milling machine. CAM software is purpose to G-code generation for CNC programming. Then CAM software and CNC milling machine are connect to RS-232-C cable for data network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.1
• /
• pp.83-91
• /
• 1993

In the digital transmission system, cyclic redundancy check(CRC) code is widely used because it is easy to be implemented and has good performance in error detection. CRC code generator consists of several shift registers and modulo 2 adders. After manipulation of input data stream in the encoder, the remaining value of shift registers becomes CRC code. At the receiving side, error can be detected and corrected by CRC codes immediately transmitted after data stream. But, in the high speed system such as an A TM switch, it is difficult to implement the serial CRC encoder because of speed limitation of available semiconductor devices. In this paper, we propose the efficient parallel CRC encoder and syndrome calculator to solve the speed problem in implementing these functions using the existing semiconductor technology.

• The KIPS Transactions:PartC
• /
• v.10C no.3
• /
• pp.317-324
• /
• 2003

In this paper, we propose the ATM based Passive Optical Network (PON) using the optical CDMA scheme with optical switches and PN codes in time domain. We also propose the bipolar optical receiving correlator for PN codes. As optical CDMA is performed by driving directly an optical switch on-off switching with PN codes, the number of distinct code sequences can be increased and the flexibility in assigning PN codes can be improved. Finally we theoretically analyze the signal-to-interference -plus-noise ratio and the bit error probability of regenerated signal and compare the performance of proposed scheme compared with ATM based PON using conventional optical CDMA with optical delay lines.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.9 no.1
• /
• pp.1-10
• /
• 1984

The time division multiplexing PCM encoder which is constructed for an airborne telemetering system is investigated. Selected by program switch, the PCM encoder has 0~64 words/framd($\pm$5V full scale) of allowable analog input channels, 0~30bits(5V$\pm$1V or 0V$\pm$1V dc) of discrete channels, 70 and 140K bits/sec of bit rate and 8~12bits/word of resolution. And filtered output PCM code is NRZ-L and Bi-S through the 5 pole Bessel LPF(f=100kHz), and the maximum accuracy of PCM encoder is $\pm$0.2% of its full scale.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2637-2642
• /
• 2015

The low-density parity check(LDPC) code is being widely used due to its outperformed error-correction ability. The decoder of the quasi-cyclic LDPC(QC-LDPC) codes, a kind of LDPC codes, requires a multi-size cyclic shifter(MSCS) performing rotation of various sizes. The MSCS can be implemented with a Benes network, which requires a $3{\times}3$ switch if the number of data to be rotated is a multiple of 3. This paper proposes a control signal generation with lower complexity and a faster $3{\times}3$ switch. For the experiment, the proposed schemes are applied to the MSCS of an IEEE 802.16e WiMAX QC-LDPC code decoder. The result shows that the delay is reduced by about 8.7%.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.9
• /
• pp.1158-1165
• /
• 1999

조건부 분기 명령어(conditional branch instruction)의 잘못된 분기 예측(branch misprediction)은 프로세서의 성능 향상에 심각한 장애 요인이 되고 있다. 특히 시분할(time-sharing) 시스템과 같이 문맥 교환(context switch)이 발생하는 멀티프로그래밍 환경(multiprogramming environment)에서는 더욱 낮은 분기 예측 정확성(branch prediction accuracy)을 보인다. 본 논문에서는 문맥 교환이 발생하는 멀티프로그래밍 환경에서 높은 분기 예측 정확성을 보이는 중첩 분기 예측표 교환(Overlapped Predictor Table Switch, OPTS) 기법을 소개한다. 분기 예측표(predictor table)를 분할하여 각각의 프로세스(process)에 할당하는 OPTS 기법은 문맥 교환의 영향을 최소화함으로써 높은 분기 예측 정확성을 유지하는 분기 예측 방법이다.Abstract There is wide agreement that one of the most important impediments to the performance of current and future pipelined superscalar processors is the presence of conditional branches in the instruction stream. Accurate branch prediction is required to overcome this performance limitation. Many branch predictors have been proposed to help to alleviate this problem, including the two-level adaptive branch predictor, and more recently, hybrid branch predictor. In a less idealized environment, such as a time-sharing system, code of interest involves context switches. Context switches, even at fairly large intervals, can seriously degrade the performance of many of the most accurate branch prediction schemes. In this study, we measure the effect of context switch on the branch prediction accuracy in various situation and show the feasibility of our new mechanism, OPTS(Overlapped Predictor Table Switch), which save and restore branch history table at every context switch.

• Phonetics and Speech Sciences
• /
• v.2 no.4
• /
• pp.3-10
• /
• 2010

The present study aims to investigate neural activations according to the level of code switching in English proficient bilinguals and to find the relationship between the performance of language switching and proficiency level using ERPs (event-related potentials). First, when comparing high-proficient (HP) with low-proficient (LP) bilingual performance in a native language environment, the activation level of N2 was observed to be higher in the HP group than in the LP group, but only under two conditions: 1) the language switching (between-language) condition known as indexing attention of code switching and 2) the inhibition of current language for L1. Another effect of N400 can be shown in both groups only in the language non-switching (within-language) condition. This effect suggests that both groups completed the semantic acceptability task well in their native language environment without the burden of language switching, irrespective of high or low performance. The latencies of N400 are only about 100ms earlier in the HP group than in the LP group. This difference can be interpreted as facilitation of the given task. These results suggest that HP showed the differential activation in inhibitory system for L1 in switching condition of L1-to-L2 to be contrary to inactivation of inhibitory system for the LP group. Despite the absence of an N400 effect at the given task in both groups, differential latencies between the peaks were attributed to the differences of efficiency in semantic processing.