• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.5
• /
• pp.23-30
• /
• 1983

A new runlength-limited minimum-bandwidth line code is designed by modifying the duobinary code. Since the new code is runlength limited, the need for a data scrambling before transmission is eliminated. The eye width and the error probability of the new code are shown to be almost the same as those of the duobinary code. Also, the power spectral shape is scarcely changed, so that the new code is suitable for such low-pass channels as optical fibers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3A
• /
• pp.277-285
• /
• 2008

We previously proposed an Orthogonal Code Hopping Multiplexing (OCHM) scheme for statistical multiplexing on a synchronous downlink. OCHM enables a large number of users to share a limited number of code channels through statistical multiplexing. We here improve the performance of OCHM by prioritizing encoded symbols according to their importance using both the conventional code division and the previously proposed code hopping multiplexing schemes. Prioritization is useful for channel coding schemes with different levels of importance for encoded symbols such as turbo-codes. Scheme performance is evaluated by simulation in terms of the required Eb/N0 for a 1% block error rate.

• Journal of Ginseng Research
• /
• v.41 no.3
• /
• pp.339-346
• /
• 2017

Background: In this study, we investigated how to convert the Panax ginseng DNA sequence code and chemical fingerprints into a two-dimensional code. In order to improve the compression efficiency, GATC2Bytes and digital merger compression algorithms are proposed. Methods: HPLC chemical fingerprint data of 10 groups of P. ginseng from Northeast China and the internal transcribed spacer 2 (ITS2) sequence code as the DNA sequence code were ready for conversion. In order to convert such data into a two-dimensional code, the following six steps were performed: First, the chemical fingerprint characteristic data sets were obtained through the inflection filtering algorithm. Second, precompression processing of such data sets is undertaken. Third, precompression processing was undertaken with the P. ginseng DNA (ITS2) sequence codes. Fourth, the precompressed chemical fingerprint data and the DNA (ITS2) sequence code were combined in accordance with the set data format. Such combined data can be compressed by Zlib, an open source data compression algorithm. Finally, the compressed data generated a two-dimensional code called a quick response code (QR code). Results: Through the abovementioned converting process, it can be found that the number of bytes needed for storing P. ginseng chemical fingerprints and its DNA (ITS2) sequence code can be greatly reduced. After GTCA2Bytes algorithm processing, the ITS2 compression rate reaches 75% and the chemical fingerprint compression rate exceeds 99.65% via filtration and digital merger compression algorithm processing. Therefore, the overall compression ratio even exceeds 99.36%. The capacity of the formed QR code is around 0.5k, which can easily and successfully be read and identified by any smartphone. Conclusion: P. ginseng chemical fingerprints and its DNA (ITS2) sequence code can form a QR code after data processing, and therefore the QR code can be a perfect carrier of the authenticity and quality of P. ginseng information. This study provides a theoretical basis for the development of a quality traceability system of traditional Chinese medicine based on a two-dimensional code.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8C
• /
• pp.1034-1039
• /
• 2004

Since the major reason of the detection failure is from the consecutive data transitions, it is desirable to limit the MTR(maximum transition run) within two. Therefore, we propose a new MTR code that limits the MTR constraint to 2 and k-constraint to 8. In addition, DC-free coding is performed to overcome the media noise that exits in low frequency of perpendicular recording system. We use a GS (Guided Scrambling) for DC-free coding, and the performance of the code is compared with that of the rate 819 code used in the conventional recording channel by a computer simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10C
• /
• pp.758-763
• /
• 2008

We introduce a noise-predictive turbo equalization using noise filter in perpendicular magnetic recording(PMR) channel. The noise filter mitigates the colored noise in high-density PMR channel. In this paper, the channel detectors used are SOVA (Soft Output Viterbi Algorithm) and BCJR algorithm which proposed by Bahl et al., and the outer decoder used is LDPC (Low Density Parity Check) code that is implemented by sum-product algorithm. Two kinds of LDPC codes are experimented. One is the 0.5Kbyte (4336,4096) LDPC code with the code rate of 0.94, and the other is 1Kbyte (8432,8192) LDPC code with the code rate of 0.97.

• ETRI Journal
• /
• v.43 no.2
• /
• pp.184-196
• /
• 2021

The research domain of underwater communication has garnered much interest among researchers exploring underwater activities. The underwater environment differs from the terrestrial setting. Some of the main challenges in underwater communication are limited bandwidth, low data rate, propagation delay, and high bit error rate (BER). As such, this study assessed the underwater acoustic (UWA) aspect and explored the expression of error performance based on t-distribution noise. Filter orthogonal frequency-division multiplexing refers to a new waveform candidate that has been adopted in UWA, along with turbo and polar codes. The empirical outcomes demonstrated that the noise did not adhere to Gaussian distribution, whereas the simulation results revealed that the filter applied in orthogonal frequency-division multiplexing could significantly suppress out-of-band emission. Additionally, the performance of the turbo code was superior to that of the polar code by 2 dB at BER 10-3.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.4
• /
• pp.13-21
• /
• 1979

In this paper, some fundamental problems in the assignment and standardization of codes for Korean letters are discussed, and a multi-code method is proposed for the code assignment. This method is designed in particular to reflect the characteristics of Korean letters. Also, based on this method, a computer internal code and a telex code are suggested. The multi-code method enables us to obtain information on the display at a terminal rather easily by assigning the information dispersed among the code sequences to code himself and position. Further this method is shown to be capable of improving the transmission rate by 7.5% over the conventional resolution method if the given code space is efficiently utilized.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.8
• /
• pp.1790-1802
• /
• 1997

A wavelet transform coding method that fulfills the requirements of HD-VCR(high definition video casstte recorder) for studio applications in proposed. A constant bit rate is achieved by a forward rate control technique whcih determins the quantizer stepsize based on the coding results fo the previous frame. We also propose a two-level coder that consists of both the IDC(independently decodable code) and the DDC(dependently decodable code). To minimize error propagation, the transformed coefficients are restructured into transform blocks which are represented by a tree structure. The result shows thta the proposed coding scheme produces better picture quality with block effects than that of DCT(discrete cosine transform) based coding schemes at the same compression ratio. The proposed method meets most of the requirements of HD-VCR.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.430-435
• /
• 2018

In this paper, an improved decoding scheme for low-complexity parity-check(LCPC) code with small code length is proposed. The LCPC code is less complex than the turbo code or low density parity check(LDPC) code and requires less memory, making it suitable for communication between internet-of-things(IoT) devices. The IoT devices are required to have low complexity due to limited energy and have a low end-to-end delay time. In addition, since the packet length to be transmitted is small and the signal processing capability of the IoT terminal is small, the LCPC coding system should be as simple as possible. The LCPC code can correct all single errors and correct some of the two errors. In this paper, the proposed decoding scheme improves the bit error rate(BER) performance without increasing the complexity by correcting both errors using the soft value of the modulator output stage. As a result of the simulation using the proposed decoding scheme, the code gain of about 1.1 [dB] was obtained at the bit error rate of $10^{-5}$ compared with the existing decoding method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.9
• /
• pp.1123-1131
• /
• 2020

The quick-response (QR) code is a two-dimensional barcode which is widely being used. Due to several interesting features such as small code size, high error correction capabilities, easy code generation and reading process, the QR codes are used in many applications. Nowadays, a printed color QR code for offline applications is being studied to improve the information storage capacity. By multiplexing color information into the conventional black-white QR code, the storage capacity is increased, however, it is hard to extract the embedded information due to the color crosstalk and geometrical distortion. In this paper, to overcome these problems, a new type of QR code is designed based on the CMYK color model and the local spatial searching as well as the global spatial matching is introduced in the reading process. These results in the recognition rate increase. Through practical experiments, it is shown that the proposed algorithm can perform the bit recognition rate improvement of about 3% to 5%.