• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1C
• /
• pp.81-89
• /
• 2003

For improving the performance of noise suppression in tactical communication environments, an enhanced MELP vocoder is suggested, in which an acoustic noise suppressor is integrated into the front end of the MELP algorithm, and an FEC code into the channel side of the MELP algorithm. The acoustic noise suppressor is the modified IS-127 EVRC noise suppressor which is adapted for the MELP vocoder. As for FEC, the turbo code, which consists of rate-113 encoding and BCJR-MAP decoding algorithm, is utilized. In acoustic noise environments, the lower the SNR becomes, the more the effects of noise suppression is increased. Moreover, The suggested system has greater noise suppression effects in stationary noise than in non-stationary noise, and shows its superiority by 0.24 in MOS test to the original MELP vocoder. When the interleave size is one MELP frame, BER 10-6 is accomplished at channel bit SNR 4.2 ㏈. The iteration of decoding at 3 times is suboptimal in its complexity vs. performance. Synthetic quality is realized as more than MOS 2.5 at channel bit SNR 2 ㏈ in subjective voice quality test, when the interleave size is one MELP frame and the iteration of decoding is more than 3 times.

• Journal of Communications and Networks
• /
• v.17 no.4
• /
• pp.351-361
• /
• 2015

In this paper, a new decoding scheme is proposed to improve the error correcting performance of low-density parity-check (LDPC) codes in high signal-to-noise ratio (SNR) region by using post-processing. It behaves as follows: First, a conventional LDPC decoding is applied to received LDPC codewords one by one. Then, we count the number of word errors in a predetermined number of decoded codewords. If there is no word error, nothing needs to be done and we can move to the next group of codewords with no delay. Otherwise, we perform a proper post-processing which produces a new soft-valued codeword (this will be fully explained in the main body of this paper) and then apply the conventional LDPC decoding to it again to recover the unsuccessfully decoded codewords. For the proposed decoding scheme, we adopt a simple product code structure which contains LDPC codes and simple algebraic codes as its horizontal and vertical codes, respectively. The decoding capability of the proposed decoding scheme is defined and analyzed using the parity-check matrices of vertical codes and, especially, the combined-decodability is derived for the case of single parity-check (SPC) codes and Hamming codes used as vertical codes. It is also shown that the proposed decoding scheme achieves much better error correcting capability in high SNR region with little additional decoding complexity, compared with the conventional LDPC decoding scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.5
• /
• pp.999-1008
• /
• 2017

In this paper, we propose a pipeline network coding (PNC) scheme for efficient data transmission in wireless networks, a data authentication scheme for verifying the integrity of data, and a node authentication scheme for a virtual source. PNC is a technique that improves the overall network performance by relaying data such that the relay node performing network coding transmits to the sender instead. However, network coding is vulnerable to a pollution attack, which is an attack by a malicious attacker to inject modified data into the network. To prevent this, hash-based message authentication code (HMAC) is used. For this purpose, in order to generate a tag used for data authentication, a key must be distributed to the nodes performing authentication. We applied a hash chain to minimize the overhead of key distribution. A null vector is used as the authentication scheme for the virtual source. Finally, we analyze the safety and complexity of the proposed scheme and show he performance through simulation.

• Journal of Internet Computing and Services
• /
• v.21 no.5
• /
• pp.129-137
• /
• 2020

Recently, software size and program code complexity have increased due to application to various fields of software. Accordingly, the existence of program bugs inevitably occurs, and the cost of software maintenance is increasing. In open source projects, developers spend a lot of debugging time when solving a bug report assigned. To solve this problem, in this paper, we apply SeqGAN algorithm to software bug repair. In detail, the SeqGAN model is trained based on the source code. Open similar source codes during the learning process are also used. To evaluate the suitability for the generated candidate patch, a fitness function is applied, and if all test cases are passed, software bug correction is considered successful. To evaluate the efficiency of the proposed model, it was compared with the baseline, and the proposed model showed better repair.

• Transactions of the Society of Information Storage Systems
• /
• v.5 no.2
• /
• pp.96-101
• /
• 2009

In recent years, the demand for portable digital devices such as cellular phone, digital camera, and MP3 player has been largely increased. To meet the requirements of such portable applications the information storage devices with smaller size, higher capacity, and lower power consumption are needed. A small form factor (SFF) HDD using a load/unload (L/UL) system is one of the appropriate alternatives to satisfy these requirements. Due to complexity of L/UL process and mechanism, it is required to investigate for better understanding the effects of design parameters. Among the various design parameters, flexible cable and friction force on the L/UL ramp become important to the dynamic characteristics of L/UL process as the system is miniaturized. The program for L/UL simulation which considers the effect of flexible cable and L/UL ramp is needed. Unfortunately, there is hardly any commercial program for the L/UL simulation except the Computer Mechanics Laboratory (CML) air bearing design program and the CML L/UL simulation code. Furthermore, the design parameters such as flexible cable and the L/UL ramp are not considered in the CML L/UL simulation code. So we embody the L/UL simulation considering flexible cable and an L/UL ramp by using the ANSYS/LS-DYNA. In this thesis, the effects of flexible cable and friction force on the dynamic characteristics and the performances of the L/UL process are studied. Numerical simulation and related experiments are carried out and compared each other.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.651-656
• /
• 2002

In general, the most important problem in slope stability analysis is that there is no definite way to describe the natural three-dimensional Joint network. Therefore, the many approaches were tried to anlayze the slope stability. Numerical modeling approach is one of the branch to resolve the complexity of natural system. UDEC, FLAC, and SWEDGE are widely used commercial code for the purpose on stability analysis. For the purpose on the more appropriate application of these kind of code, however, three-dimensional distribution of joint network must be identified in more explicit way. Remaining problem is to definitely describe the three dimensional network of joint and bedding, but it is almost impossible in practical sense. Three dimensional joint generation method with random number generation and the results of generation to UDEC have been applied to settle the refered problems in field site. However, this approach also has a important problem, and it is that joint network is generated only once. This problem lead to the limitation on the application to field case, in practical sense. To get rid of this limitation, Monte Carlo Simulation is proposed in this study 1) statistical analysis of input values and definition of the applied system with statistical parameter, 2) instead of the consideration of generated network as a real system, generated system is just taken as one reliable system, 3) present the design parameters, through the statistical analysis of ouput values Results of this study are not only the probability of failure, but also area of failure block, shear strength, normal strength and failure pattern, and all of these results are described in statistical parameters. The results of this study, shear strength, failure area, pattern etc, can provide the direct basement on the design, cutoff angle, support pattern, support strength and etc.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6A
• /
• pp.379-385
• /
• 2003

In this paper, we propose a time constant control method for sieving local minimum problem of the multiuser detector using Hopfield neural network for synchronous multi-rate code division multiple access(CDMA) system in selective fading environments and its performance is compared with that of the parallel interference cancellation(PIC). We also assume that short scrambling codes of 256 chip length are used an uplink, suggest a simple correlation estimation algorithm and circuit complexity reduction method by using cyclostationarity property of short scrambling code.It is verified that multiuser detector using Hopfield neural network more efficiently cancels multiple access interference(MAI) and obtain better bit error rate and near-far resistant than conventional detector.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.3
• /
• pp.177-182
• /
• 2008

Because output of multi-code CDMA system adapted high speed data transmission becoming multi-level system use linear amplifier in output stage and complex output signal. Therefore, Multi-Code CDMA system has shortcoming of high price, high complexity etc. Binary CDMA technology that allow fetters in existing CDMA technology to supplement this shortcoming proposed. In binary CDMA system When correlator process high speed data, bottle-neck phenomenon is happened on synchronization acquisition process, it is very important parameter. Because existent correlator must there be advantage that power consumption is small but flow addition of several stages to receive correlation's value, the processing speed has disadvantage because the operation amount is much. Therefore in this paper, proposed correlator has characteristic such as data is able to high speed processing, chip area is independent and power consumption is constant in structure in binary CDMA system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.2
• /
• pp.157-162
• /
• 2016

The performance of turbo-like codes highly depends on their frame size and thus, the bit error rate performance of turbo-like codes can be improved by increasing the frame size. Unfortunately, increasing the frame size of channel codes induces some drawbacks such as the increase of not only encoding and decoding complexity but also transmission and decoding latencies. On the other hand, a faster than Nyquist (FTN) transmission causes intentional inter-symbol interference (ISI) and thus, induces some correlation among the transmission symbols. In this paper, we propose an FTN transmission with multiple channel codes. By exploiting the correlation among the modulated symbols, multiple code frames can be regarded as a code frame with a lager frame size. Due to the inherent parallel encoding scheme of proposed scheme, parallel decoding can be easily implemented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2637-2642
• /
• 2015

The low-density parity check(LDPC) code is being widely used due to its outperformed error-correction ability. The decoder of the quasi-cyclic LDPC(QC-LDPC) codes, a kind of LDPC codes, requires a multi-size cyclic shifter(MSCS) performing rotation of various sizes. The MSCS can be implemented with a Benes network, which requires a $3{\times}3$ switch if the number of data to be rotated is a multiple of 3. This paper proposes a control signal generation with lower complexity and a faster $3{\times}3$ switch. For the experiment, the proposed schemes are applied to the MSCS of an IEEE 802.16e WiMAX QC-LDPC code decoder. The result shows that the delay is reduced by about 8.7%.