• 한국환경과학회지
• /
• 제30권12호
• /
• pp.1041-1051
• /
• 2021

The purpose of this study was to identify for extenders, adhesives, colorants, and fungicides suitable for the production of high-quality film-coated seeds of Chinese cabbage. In addition, the effect of various additives used for film coating on the germination of coated seeds and seedling vigor was investigated to establish appropriate treatment conditions for film coating efficiency. The germination rate and germination speed in Chinese cabbage film-coated seeds did not differ significantly depending on the type and concentration of the extender, while the use of Talc resulted in superior granulation capacity and adhesion of the seed coat in comparison to Zeolite. There was no significant difference in the germination rate depending on the type of adhesive used for film coating of Chinese cabbage seeds, but the germination rate was slightly slower in the film-coated seeds using carboxymethyl cellulose as an adhesive. On the other hand, the seeds coated with a film using 1% PVA as an adhesive not only maintained hardness enough to withstand external pressure, but also showed a high germination rate. In addition, the suitable disinfectant for film coating was venoram, and the treatment concentration was good at 250 mg·L^-1. The type of colorant used in the film-coated seeds of Chinese cabbage did not significantly affect the germination rate, germination speed, and seedling vigor. The seeds film-coated using the liquid colorant were superior in appearance to the seeds film-coated with the solid colorant, which implies the possibility of reduction in the manufacturing costs by using the water-soluble paints as colorants for film-coated seeds.

• 한국기계가공학회지
• /
• 제10권3호
• /
• pp.108-112
• /
• 2011

In order to obtain excellent flatness and surface roughness of glass substrate disk, uniform distribution of abrasives should be important for uniform polishing. We introduced coated-type magnetic abrasives and magnetic field to a lapping for the improvement of surface roughness and removal rate. Polishing properties with the conventional diamond abrasives and the coated-type magnetic abrasives were compared. As a result, the coated-type magnetic abrasives showed small surface roughness and large removal rate by applying magnetic field. And it also was shown that coated-type magnetic abrasives could save the more amount of polishing liquid under the same removal rate than the conventional diamond abrasives can.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.1043-1046
• /
• 2001

In this study, characteristics of LPB having gold anode fabricated by sputtering methode were analyzed. As results, The 1st efficiency and the impedance characteristics of LPB decreased with increased gold coated on anode and current collector. But the rate characteristics and charge-discharge cycling characteristics increased with increased gold coated on anode and current collector. During 2C discharge of the rate characteristics test, the rate characteristics of LPB without gold coated and the rate characteristics of LPB with gold coated in twice were 159mAh/g and 189mAh/g, respectively. The discharge capacity was gradually degreased with the discharge cycling to about 20th cycles. But LPB with gold coated in twice was stabilized than LPB without gold coated.

• Transactions on Electrical and Electronic Materials
• /
• 제7권4호
• /
• pp.167-172
• /
• 2006

Submicron colloidal silica coated with ceria were prepared by mixing of silica and nano ceria particles and modified by hydrothermal reaction. The polishing efficiency of the ceria coated silica slurry was tested over oxide film on silicon wafer. By changing the polishing pressure in the range of $140{\sim}420g/cm^2$ with the ceria coated silica slurries in $100{\sim}300nm$, rates, WIWNU and friction force were measured. The removal rate was in the order of 200, 100, and 300 nm size silica coated with ceria. It was known that the smaller particle size gives the higher removal rate with higher contact area in Cu slurry. In the case of oxide film, the indentation volume as well as contact area gives effect on the removal rate depending on the size of abrasives. The indentation volume increase with the size of abrasive particles, which results to higher removal rate. The highest removal rate in 200 nm silica core coated with ceria is discussed as proper combination of indentation and contact area effect.

• International Journal of Concrete Structures and Materials
• /
• 제2권2호
• /
• pp.99-105
• /
• 2008

Southern exposure test specimens were used to evaluate corrosion performance of epoxy-coated reinforcing bars in chloride contaminated concrete by electrochemical impedance spectroscopy method. The test specimens with conventional bars, epoxy-coated bars and corrosion inhibitors were subjected 48 weekly cycles of ponding with sodium chloride solution and drying. The polarization resistance obtained from the Nyquist plot was the key parameter to characterize the degree of reinforcement corrosion. The impedance spectra of specimens with epoxy-coated bars are mainly governed by the arc of the interfacial film and the resistance against the charge transfer through the coating is an order of magnitude higher than that of the reference steel bars. Test results show good performance of epoxy-coated bars, although the coatings had holes simulating partial damage, and the effectiveness of corrosion-inhibiting additives. The corrosion rate obtained from the impedance spectroscopy method is equivalent to those determined by the linear polarization method for estimating the rate of corrosion of reinforcing steel in concrete structures.

• International Journal of Advanced Culture Technology
• /
• 제3권1호
• /
• pp.39-45
• /
• 2015

This research aims to study an effect of sodium chloride solution concentration on the corrosion rate of AA1100 aluminium alloy and SGACD zinc coated steel lap joint with a test duration of 30 days and a test temperature of $45^{\circ}$. The summarized results are as follows. Increase of the NaCl solution concentration increased the weight loss of Al, corrosion rate of Al, weight loss of Fe and also decreased the corrosion rate of Fe. Increase of the test duration affected to increase the weight loss and corrosion rate of Al and also decrease the weight loss and corrosion rate of Fe. The corrosion that was formed in a lap joint consisted of the uniform corrosion on the surface of the metals and the galvanic corrosion in the lap area of the joint. The maximum weight loss of AA 1100 aluminium and SGACD zinc coated steel that was occurred in the sodium chloride with 3.25% was 2.203% and 3.208%, respectively.. The maximum corrosion rate of AA 1100 aluminium and SGACD zinc coated steel that was occurred in 4.00% and 3.5% sodium chloride solution was 0.156 mm/year and 0.479 mm/year, respectively.

• Archives of Pharmacal Research
• /
• 제8권1호
• /
• pp.7-14
• /
• 1985

Membrane-coated tablet of isonicotinic acid hydrazide (INAH) which releases INAH at the zero-order kinetics was deveoped. It consisted of a soluble tablet core surrounded by a porous membrane which controls the diffusion rate. Tablet cores were prepared by compressing granules of INAH and polyvinyl chloride (PVC) dissolved in methyl ethyl ketone in which micronized sucrose were suspended. Diffusion rate of INAH from the tablet through the membrane was constant until the loaded INAH in the core was almost released. The rate was independent of pH of the dissolution medium. Water-soluble sucrose particles behaved as a poreproducing material in the water-insoluble PVC film coat. The pH independency of the rate was probably due to the high solubility of INAH in the water of wide pH range. The diffusion rate of INAH could be controlled by chnaging the composition of the membrane or the coat weight. This membrane-coated INAH tablet seemed to be a powerful candidate for the controlled release drug delivery system (DDS) of INAH or other highly watersoluble drugs.

• 한국표면공학회지
• /
• 제43권6호
• /
• pp.260-265
• /
• 2010

STD 61 steel has been widely used for tools, metallic mold and die for press working because of its favorable mechanical properties such as high toughness, and creep strength as well as excellent oxidation resistance. The STD 61 tool steel coated with TiN and ZrN by sputtering results in improvement of wear and corrosion resistance. In this study, surface characteristics of TiN and ZrN film coated STD 61 by sputtering were studied by using FE-SEM, EDS, XRD, and XRR and nanoindentation tests. From the results of surface characteristics of coated specimen, the ZrN coated surface showed finer granular than that of TiN coated surface. The coated layer structures of ZrN and TiN were grown to (111) and (200) preferred orientation. From the results of XRR test for surface roughness, density and growth rate of coating film, surface roughness and growth rate of ZrN coated film revealed lower values those of TiN coated film, whereas density of ZrN coated film showed higher values than that of TiN coated film. From the nanohardness and elastic modulus test, nanohardness value and elastic modulus of ZrN coated film became higher than those of TiN coated film.

• 대한치과보철학회지
• /
• 제38권5호
• /
• pp.631-639
• /
• 2000

Root-form endosseous implants which are in use today have a variety of materials, designs and surface characteristics. Among them, pure titanium surface implants and titanium matrix coated with HA are popular as well as are available in many studies. Rate of clinical success is obviously lower in jaw with cancellous bone than dense bone. In order to increase the rate of success in poor bone quality. More advanced techniques of implant surgery and surface treatment of implant fixture body have been developed. As a successful result, the installation of HA coated implant in bone quality type III or IV became highly successful. Since most clinical studies were performed without knowing the characteristics of HA coated implants, it has been impossible to come up with proper clinical data. Therefore the characterization of HA coated implants is essential to understand long term clinical performance and the predictability of HA coated implant system Our results showed that HA coated implants had the success rate at 93.7% in bone quality type III, IV for 3.8 years, and the fixture of Steri-Oss showed more stability with time.

• 대한기계학회논문집A
• /
• 제21권10호
• /
• pp.1674-1682
• /
• 1997

Fatigue tests were performed to investigate the effect of ceramic coatings as in TiN and TiCN on fatigue crack growth properties of ceramic coated 1Cr-1Mo-0.25V steel with different coating thickness in laboratory air conditions. The experimental results are described with respect to a Paris equation, da/dN=C(.DELTA.K)$^{m}$ , where the crack growth rate of coated specimens provided as similar growth rate as that of the uncoated specimen regardless of coating thickness. Furthermore, it was observed that the type of coating layer had virtually no effect on crack growth rate in the full region of stress intensity factor range. And it was also appeared that the final crack length of TiCN coated specimens was short compared to that of TiN coated, and the substrate specimens, in which it was inferred due to lowering the toughness of coated material from high hardness of TiCN coating layer itself.