Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Fatigue crack growth properties of ceramic coated 1Cr-1Mo-0.25V steel

세라믹 코팅된 1Cr-1Mo-0.25V강의 피로균열성장 특성

  • 서창민 (경북대학교 기계공학부) ;
  • 김경렬 (포항공과대학교 가속기연구소)
  • Published : 1997.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

Fatigue tests were performed to investigate the effect of ceramic coatings as in TiN and TiCN on fatigue crack growth properties of ceramic coated 1Cr-1Mo-0.25V steel with different coating thickness in laboratory air conditions. The experimental results are described with respect to a Paris equation, da/dN=C(.DELTA.K)$^{m}$ , where the crack growth rate of coated specimens provided as similar growth rate as that of the uncoated specimen regardless of coating thickness. Furthermore, it was observed that the type of coating layer had virtually no effect on crack growth rate in the full region of stress intensity factor range. And it was also appeared that the final crack length of TiCN coated specimens was short compared to that of TiN coated, and the substrate specimens, in which it was inferred due to lowering the toughness of coated material from high hardness of TiCN coating layer itself.

Keywords

References

  1. PVD · CVD 皮膜の基礎と應用 上田重明(et al.)
  2. JSME International Journal, Series Ⅰ v.35 no.3 The Influence of Applied Stress Ratio on Fatigue Strength of TiN-coated Carbon Steel Shiozawa, K.;Nishino, S.;Handa, K.
  3. Surface and Coatings Technology v.74-75 Cavitation Protection by Low Temperature TiCN coatings Munster, S.;Kohlhof, K.
  4. J. Soc. Mat. Sci. v.43 no.490 Fatigue Properties and Fatigue Crack Behavior of Steel with TiNx Films Laminated by Dynamic Mixing Method Murakami, R.;Morikawa, Y.;Morimoto, Y.;Yoneda, M.;Katsumura, M.
  5. Surface and Coatings Technology v.63 Microstructural Investigation of Droplets in Arc-evaporated TiN Films Ljungcrantz, H.;Hultman, L.;Sundgren, J.
  6. Surface and Coating Technology v.43/44 no.1-3 Reduction in Macroparticles during the Deposition of TiN Films Prepared by Arc Ion Plating Akari, K.;Tamagaki, H.;Kumakiri, T.;Tsuji, K.
  7. ASTM Standard Test Method for Measurement of Fatigue Crack Growth Rates
  8. KSME Journal v.3 no.2 Growth Behavior of Short Surface Cracks in 2.25Cr-1Mo Steel Suh, C. M.;Ritchie, R. O.;Kang, Y. G.
  9. J. Soc. Mat. Sci. v.35 no.394 An X-ray Study on Residual Stress and Strength of TiN-coated WC-Co Alloy Itoh, T.;Kamach, K.;Yamamoto, T.
  10. J. Soc. Mat. Sci. v.38 no.429 Investigation of Surface Cracks near Fracture Point in VC Coated Steel under Rotaing Bending Fatigue Saruki, K.;Hotta, S.;Arai, T.
  11. Proceedings of ITSC '95 Fatigue Strength and Fracture Mechanisms of Ceramic-Sprayed Steel in Air and a Corrosive Environment Hwang, J. U.;Ogawa, t.;Tokaji, K.
  12. J. of the Society of Materials Science v.39 no.442 Effect of TiN Coating on Fatigue Strength of Carbon Steel Shiozawa K.;Ohshima S.
  13. Mechanical Behavior of Materials v.6 Fatigue Properties of TiN Films on Steel Coated by Dynamic Mixing Murakami, M.;Takeuchi, T.;Yano, T.;Katsurmura M.
  14. 대한기계학회논문집 v.19 no.3 TiN 코팅된 고속도강과 합급공구강의 마멸거동 김석삼;서창민;류춘무;박준목
  15. 대한기계학회논문집 v.16 no.12 TiN 박막을 코팅한 드릴의 수명향상에 관한 연구 김홍우;김문일