• 전기화학회지
• /
• 제10권2호
• /
• pp.82-87
• /
• 2007

New porous separators based on non-polyolefin materials including the blend of poly (vinyl chloride) (PVC)/poly (vinylidene fluoride-co-hexafluoropropylene) (P(VdF-co-HFP)/poly(methyl methacrylate) (PMMA), and the porous separator based on poly (vinylidene fluoride) (PVdF) were prepared by phase inversion method. The porosity and morphology were controlled with phase inversion rate, which is governed by the relative content of non-solvent and solvent in coagulation bath. To enhance tensile strength, the solvent pre-evaporation and uni-axial stretching processes were applied. The ionic conductivity was increased with increasing stretching ratio, and tensile strength was increased with increasing solvent pre-evaporation time and stretching ratio. The 200% stretched PVdF separator showed 56 MPa of tensile strength, and the ionic conductivity of the stretched PVdF separator was $8.6{\times}10^{-4}\;S\;cm^{-1}\;at\;25^{\circ}C$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.273-273
• /
• 2006

Over the past years, a large number of acrylate polymers have been developed and the overcoat thin layer containing acrylate polymers have been used for TFT-LCD color filter. As forming thin layer using acrylate polymers, the existing acrylate polymers have some problems such as low hardness by low Tg temperature, coating uniformity and solubility in organic solvent. To solve these problems, we synthesized new polymer(Scheme.), containing olefin monomer, which has high Tg temperature, good coating uniformity and good solubility in organic solvent. The overcoat thin layer containing new polymer resulted in good coating uniformity, stain, spot, scratch, heat resistance, DOP(Degree Of Planarization) on RGB glass, transparency, hardness, adhesion, anti-chemicals(anti-acid, anti-base, anti-organic solvent), insulation and anti-humidity. Scheme. The structure of new polymer X = Olefin monomer contains ketone, ester, hydroxy, ether, halogen, nitrile, alkoxy, phenyl functional group $R_1$ and $R_2$= H or $CH_3$. Ratio=0<[1/(1+m+n)]<0.7,0.1[$\leq$[n/(1+m+n)]<0.5.

• 공업화학
• /
• 제3권4호
• /
• pp.588-594
• /
• 1992

Potassium octoate 촉매 존재하에 toluene diisocyanate(TDI)를 사용하여 polyisocyanurate를 합성할 때 용매에 포함된 수분과 부탄올이 반응물의 점도 변화율, 반응시간(생성물의 점도가 5 poise가 될 때까지의 반응시간), 생성물의 분자량 분포 및 TDI전환율에 미치는 영향을 고찰하였다. Butyl acetate용매에 포함된 수분의 양이 0.1%인 반응 조건에서 uretidione이 생성되었으며 이때 가장 높은 TDI전환율이 얻어졌다. Uretidione은 butanol을 용매에 첨가할 때는 생성되지 않았다. 첨가된 butanol양이 증가할수록 TDI전환율은 증가하고 분자량 분포도 넓어졌다.

• Journal of Pharmaceutical Investigation
• /
• 제30권1호
• /
• pp.47-50
• /
• 2000

A new technique has been developed for the preparation of Lactobacillus microcapsules to enhance the stability against high temperature, humidity, gastric acid and bile acid. Employing fluidized bed coating, primary sub-coating was processed in non-organic solvent system, so that Lactobacillus did not directly contact with organic solvent. Secondary enteric-coating was processed in organic solvent with low temperature $(below\;33^{\circ}C)$ technique, which minimized the heat labilability of Lactobacillus. Survival rate of Lactobacillus within microcapsule was not less than 95% and acid tolerance was above 30% in the artificial gastric acid. Further more it was dissolved in the artificial intestine juice within 2-3 hr. Average size of Lactobacillus microcapsules was $450\;{\mu}m$(25-50 mesh) and its viability was above 90% in the direct tableting.

• Bulletin of the Korean Chemical Society
• /
• 제11권4호
• /
• pp.309-313
• /
• 1990

The rates of solvolysis of trans-$[Co(N-eten)_2Cl_2)$+ (N-eten; N-ethylethylenediamine) have been investigated using spectrophotometric method in binary aqueous mixtures containing methyl alcohol, isopropyl alcohol, t-butyl alcohol, ethylene glycol and glycerol. The values of ${\Delta}H^{\neq}$ and ${\Delta}S^{\neq}$ obtained from temperature effect on the rate constants were $80{\sim}84 kJmol^{-1}$ and $- 28{\sim} - 45 JK^{-1}mol^{-1}.$ Extrema found in the variation of the enthalpy and entropy of activation with solvent composition correlated very well with extrema in the variation of the physical properties of mixture which relate to sharp change in the solvent structure. The reaction mechanism was discussed in terms of correlation diagrams involving the exess molar Gibbs function of mixing for the binary mixtures. The behavior of this cobalt(Ⅲ) complex was compared with that of t-butyl chloride. The application of free energy cycle to the process initial state to transition state in water and in the mixture showed that the solvation of transition state had dominant effect on the rates in the mixtures. It was found that $S_N1$ character was increased with increasing the content of co-solvent in the mixture.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.259-263
• /
• 2001

There are several steps such as slicing, lapping, chemical etching and mechanical polishing in the silicon wafer production process. The chemical etching step is necessary to remove damaged layer caused In the slicing and lapping steps. The typical etching liquor is the acid mixture comprising nitric acid, acetic acid and hydrofluoric acid. At present, the waste acid is treated by a neutralization method with a high alkali cost and balky solid residue. A solvent extraction method is applicable to separate and recover each acid. Acetic acid is first separated from the waste liquor using 2-ethlyhexyl alcohols as an extractant. Then, nitric acid is recovered using TBP(Tri-butyl phosphate) as an extractant. Finally hydrofluoric acid is separated with the TBP solvent extraction. The expected recovered acids in this process are 2㏖/l acetic acid, 6㏖/1 nitric acid and 6㏖/l hydrofluoric acid. The yields of this process are almost 100% for acetic acid and nitric acid. On the other hand, it is important to recover and reuse the metal values contained in various industrial wastes in a viewpoint of environmental preservation. Most of industrial products are made through the processes to separate impurities in raw materials, solid and liquid wastes being necessarily discharged as industrial wastes. Chemical methods such as solvent extraction, ion exchange and membrane, and physical methods such as heavy media separation, magnetic separation and electrostatic separation are considered as the methods for separation and recovery of the metal values from the wastes. Some examples of the application of solvent extraction to the treatment of wastes such as Ni-Co alloy scrap, Sm-Co alloy scrap, fly ash and flue dust, and liquid wastes such as plating solution, the rinse solution, etching solution and pickling solution are introduced.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.292-292
• /
• 2017

This study was conducted to evaluate the effect of anti-obesity and antioxidant enzyme activities in vitro by different solvent fractions from the roots of Codonopsis lanceolata. The cytotoxicity of different solvent fractions of C. lanceolata on 3T3-L1 preadipocytes were evaluated using the MTT assay, the rate of cell survival progressively decreased in a dose-dependent manner. Butyl alcohol fraction at $200{\mu}g/mL$ exhibited a pronounced cytotoxic effect (75.73%) on 3T3-L1 cell comparable to that of the hexane fraction (79.82%), methylene chloride fraction (84.02%), ethyl acetate fraction (87.62%) and DW fraction (86.30%) at the same concentration. The Oil Red O solution was used to determine whether different solvent fractions of C. lanceolata induce adipocyte differentiation in 3T3-L1 preadipocytes. Confluent 3T3-L1 cells were treated with $50{\mu}g/mL$ concentration of solvent fraction extracts from C. lanceolata. Inhibitory degree of lipid accumulation against solvent fraction extracts showed a significant level compared with the control. Both lipid accumulation and adipocyte differentiation showed relatively high effect on methyl chloride fraction. The root extract of C. lanceolata had the highest SOD enzyme activity of 84.5% in ethyl acetate partition layer and while water partition layer of diploid showed the lowest SOD enzyme activity of 57.9%. The activity of CAT, APX and POD showed a significantly higher activity in ethyl acetate partition layer compared with the other fraction. These results suggested that the roots of C. lanceolata may assist in the potential biological activity on anti-obesity and antioxidant capacity.

• 자원리싸이클링
• /
• 제19권4호
• /
• pp.29-34
• /
• 2010

염산 용액에서 코발트(II)와 망간(II)의 이온평형을 해석하여 염산농도에 따른 착물의 농도분포를 구했다. 염산농도 4에서 10 M 사이의 범위에서 코발트의 대부분은 $CoCl_2$로, 망간은 $MnCl_{3}^-$와 $MnCl_2$로 존재한다. Alamine336에 의한 코발트와 망간 추출반응의 평형상수를 이용하여 두 금속의 등온추출곡선을 구했다. 망간 추출반응의 평형상수가 코발트의 평형상수보다 크나, 등온추출곡선을 비교하면 동일한 추출조건에서 코발트가 망간보다 Aalmine336에 효율적으로 추출된다.

• 대한화학회지
• /
• 제24권4호
• /
• pp.288-294
• /
• 1980

$CH_3O(CO)Cl,\;CH_3S(CO)Cl\;및\;CH_3S(CS)Cl$/TEX>의 가메탄올 분해반응속도를 메탄올-아세토니트릴 혼합용매하에서 결정하였다. 반응속도는 주로 벌크한 용매성질에 의해서만 아니라 일부 친전자적 특수용매화에 의해서도 영향을 받는다는 것이 실험결과로 알려졌다. 용매의 극성은 반응속도에 영향을 미치는 중요인자는 아니지만, $S_N1$형의 천이상태 안정화에 기여함을 알았다. $CH_3S(CS)Cl$/TEX>의 가메탄올 분해반응은 메탄올에 의한 이탈기의 특수 용매효과 및 큰 유전상수를 가진 용매에 의한 천이상태 안정화가 중요한 $S_N1$형으로 진행됨을 알았다. $CH_3O(CO)Cl$의 가메탄올 분해반응은 위의 경우와는 반대로 $S_N2$형으로 진행됨을 알았다.

• 대한화학회지
• /
• 제35권5호
• /
• pp.493-499
• /
• 1991

여러 가지 유기용매에서 서로 다른 대이온을 가진 trans-$[Co(R,R-chxn)_2Cl_2]^+$착물의 원편광이색성(CD) 스펙트럼을 측정하였다. 여기서 R,R-chxn은 (1R,2R)-1,2-diaminocyclohexane 이다. 착물의 CD 스펙트럼에서 관찰된 변화는 현저한 용매의존성을 나타내었다. 그리고 첫 흡수띠 영역$(^1A_{2g})$에서 CD 스펙트럼의 변화 정도는 용매의 donor number(DN)에 의존하였다. trans-[Co(R,R-chxn)$_2Cl_2]^+$ 착물의 CD 스펙트럼 변화는 $^1H$ NMR 스펙트럼으로부터 R,R-chxn 리간드 중의 수평방향의 N-H 수소와 용매분자와의 우선적인 상호작용에 기인되는 것으로 해석되었다.