• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.393-397
• /
• 2001

The innovatory process, that is the direct separation and recovery of the iron and zinc metals contained in the high temperature exhaust gas generated from the electric arc furnace fer the inn scrap melting and/or the dust treatment, has been proposed. This proposed process consists of the moving coke bed filter that is directly connected to the electric furnace, and the following heavy metal condenser. The exhaust gas passes through the filter and the condenser right after exhausting from the electric furnace. The moving coke bed filter is being controlled at about 1000℃ and collects iron and slag components contained in the high temperature exhaust gas. Heavy metals such as zinc and lead pass through the filter as vapor. Based on the thermodynamic considerations, the iron oxide and the zinc oxide are reduced in the filter. The solution loss reaction rate is comparatively low at about 1000℃ in the coke bed filter by the analysis using the mathematical simulation model. The heavy metal condenser is installed in the position after the coke bed filter, and rapidly cools the gas from about 1000℃ to 450℃ by a full of the cooling medium like the solid ceramic ball in addition to the cooling from the wall. The zinc and lead vapor condense and separate f개m the gas in a liquid state. The investigation of the characteristics of the exhaust gas of the commercial electric arc furnace, the fundamental experiments of the laboratory scale and the bench scale ensured the formation of this proposed process. A small-scale pilot plant examination is carrying out at present to confirm the formation of the process. It is certain that the dust generation of the electric arc furnace is extremely decreased, and it can save the energy consumption of usual dust treatment processes by the realization of this process.

• 전자공학회논문지SC
• /
• 제44권5호
• /
• pp.18-29
• /
• 2007

본 논문에서는 다중 패킷을 전송하는 네트워크 제어시스템을 대상으로, 전체 시스템의 안정성 변화를 분석할 수 있는 새로운 방법을 제안하였다. 먼저, 메시지의 최대 시간 지연을 보장할 수 있는 스케쥴링 방식과 데이터 손실을 나타낼 수 있는 이산 스위치 상태방정식을 새롭게 제시하였으며, 이를 이용하여 네트워크 제어시스템과 등가인 비동기 시스템(asynchronous dynamical system)을 유도하였다. 이후, 제어기의 샘플링 주기, 시간 지연, 데이터 전송 성공률, 전송 패킷의 개수에 따라 변화하는 네트워크 제어시스템의 안정성을 판별할 수 있도록 새로운 정리들을 제안하였다. 마지막으로, Batch Reactor 시스템을 대상으로 제안한 정리들을 적용하여 시뮬레이션하고 그 결과를 분석함으로써 본 논문에서 제안한 안정성 분석 방법의 타당성을 입증하였다.

• 대한조선학회논문집
• /
• 제52권5호
• /
• pp.418-424
• /
• 2015

This paper is about the bow structure design of the ship-typed and turret moored FPSO which is subjected to the bow-flare slamming load in harsh North Sea environments. Quad 204 FPSO project involves the redevelopment of the existing Schiehallion FPSO which is damaged by impact wave loads. Normally all offshore systems including FPSO are designed to withstand the 100 year storm I.e. the storm that happens once every hundred years at the location where the system is installed. Several incidents have revealed that impact loading is important issue for moored floating production systems. In this paper, the design impact loads are estimated considering the ship owner’s specification, measured data from model tests, requirements of the classification society rules and results of numerical simulation analyses. The impact pressure by numerical analysis is 1.8 times greater than required value by CSR adopted by IACS. Based on the selected design load, plastic design formulae allowing the local material yielding are applied for the initial scantling of the bow structure. To verify the structural integrity, FE analyses are carried out considering the local area subjected to the impact wave loads. Their results such as structural arrangement, design loads and scantlings are shown and discussed. It is found that plastic design formulae in adopting Initial design phase give sufficiently conservative results in terms of structural strength.

• 한국태양에너지학회 논문집
• /
• 제34권2호
• /
• pp.8-15
• /
• 2014

The objective of this paper is to suggest a design topology of permanent magnet synchronous generator with 2,000kW capacities for wind turbine. The suggested topology is to provide 3 split magnet PMSG instead of single magnet, and performed an analysis of eddy current loss and iron loss for suggested type using ansoft maxwell commercial program. The simulation results of suggested magnet type show there duction of eddy current loss as 13.87kW with loadless conditions and23.48kW with rated conditions, but iron loss for rotor yoke show the in creasing trend as2.2kW with loadless conditions and 0.2kW with rated conditions. The suggested 3 split maget type is to identified as more useful for 2,000kW PMSG.

• 한국태양에너지학회 논문집
• /
• 제37권2호
• /
• pp.35-45
• /
• 2017

The types of installation of the photovoltaic system applied to domestic residential buildings are classified as follows: Mounted modules with air circulation, semi-integrated modules with air duct behind, integrated modules with fully insulated back. In order to study generation characteristics of PV system, we verified the validity of interpretation program based on long-term measurement data of demonstration house installed in BAPV form and also analyzed the generation characteristics and performance of each installation type. The results are as follows. First, the RMSE of amount of generation and simulation according to annual daily insolation of demonstration system located in Daejeon was 0.98kWh and the range of relative error of monthly power generation was -5.8 to 3.1. Second, the average annual PR of mounted modules was 82%, semi-integrated modules 76.1% and integrated modules 71.9%. This differences were attributed to temperature loss. Third, the range of operating temperature of annual hourly photovoltaic modules was -6.5 to $61.0^{\circ}C$ for mounted modules, $-6.0{\sim}73.9^{\circ}C$ for semi-integrated modules and -5.5 to $88.9^{\circ}C$ for integrated modules. The temperature loss of each installation type was -14.0 to 16.1%, -13.8 to 21.9%, and -13.6 to 28.5%, respectively.

• 한국컴퓨터정보학회논문지
• /
• 제17권5호
• /
• pp.71-80
• /
• 2012

본 논문에서는 개인 영역의 저속 데이터 전송률을 요구하는 응용을 운용하기 위한 미래병사체계의 시스템 모델을 제안한다. 저속 데이터 전송률을 요구하는 응용들은 기존의 무선 센서 네트워크기술을 참조할 수 있지만, 상이한 데이터 전송률을 지원하기에 적합하지 않다. 이러한 기존 시스템의 문제점들을 해결하가 위하여 미래병사체계에 적합한 CSMA/CA 알고리즘을 제안하였다. 제안한 알고리즘은 데이터 전송률에 기반을 두어 CSMA/CA 알고리즘의 파라미터를 가변하도록 설계되었다. 제안한 시스템 모델 및 알고리즘은 Castalia를 이용하여 시뮬레이션 하였으며, 시뮬레이션 결과 제안한 시스템 모델이 기존 방식과 비교하여 데이터 처리량이 개선되고, 충돌 확률이 감소함을 확인할 수 있었다.

• 한국물환경학회지
• /
• 제22권6호
• /
• pp.1068-1074
• /
• 2006

For receiving water quality protection a control systems of urban drainage for CSOs reduction is needed. Examples in combined sewer systems include downstream storage facilities that detain runoff during periods of high flow and allow the detained water to be conveyed by an interceptor sewer to a centralized treatment plant during periods of low flow. The design of such facilities as storm-water detention storage is highly dependant on the temporal variability of storage capacity available as well as the infiltration capacity of soil and recovery of depression storage. For the continuous long-term analysis of urban drainage system this study used analytical probabilistic model based on derived probability distribution theory. As an alternative to the modeling of urban drainage system for planning or screening level analysis of runoff control alternatives, this model has evolved that offers much ease and flexibility in terms of computation while considering long-term meteorology. This study presented rainfall and runoff characteristics of the subject area using analytical probabilistic model. Runoff characteristics manifested the unique characteristics of the subject area with the infiltration capacity of soil and recovery of depression storage and was examined appropriately by sensitivity analysis. This study presented the average annual CSOs, number of CSOs and event mean CSOs for the decision of storage volume.

• 대한전자공학회논문지SP
• /
• 제42권2호
• /
• pp.1-8
• /
• 2005

지금까지 많은 영상 영역분할 방법들이 연구되고 있으나 이들 방법들은 잡음영상에 대해서는 주로 백색잡음과 같은 일반적인 환경에서 영상을 처리하였지만, 충격성 잡음 영상에 대해서는 영상과 잡음을 정확히 구별할 수 있는 파리미터를 추출하기가 어렵기 때문에 효과가 떨어지는 문제점을 가지고 있다. 그래서 기존 방법을 이용한 모든 응용분야에는 충격성 잡음에 따른 성능 저하의 잠재성이 항상 내포되어 있다. 본 논문에서는 충격성 잡음 영상에 효과적으로 영상정보 파라미터를 추출할 수 있는 사분위편차(quartile deviation) 기반 쿼드트리 영역분할 방법을 제안한다. 본 방식은 영상데이터의 전송이나 처리과정에서 포함될 수 있는 충격성 잡음을 영상정보로부터 판별할 수 있는 장점을 가기지 때문에 다양한 영상처리 분야에 응용할 수 있다. 실험적인 비교를 통해서 제안한 쿼드트리 영역분할 방법이 충격성 잡음이 첨가된 환경에서 영상정보 파라미터를 정확히 추정할 수 있다는 것을 확인할 수 있음을 검증하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.21-24
• /
• 2002

There has been a growing need for interaction between human operator and a remote system to perform a complex task in an unpredictable environment and to operate an important work at a remote distance. The interaction becomes an important parameter in the teleautonomous operation because it permits the operator to control the system at remote distance. As the environmental uncertainties to be applied are getting increased, so is the difference between the plan of the operator and the execution of the system increased. Since the operator may be difficult to know the latest information from frequently changing environment due to time-varying delays, remote system may be hard to control in accordance with the operators command. Interactive Teleautonomous Control System (ITCS) is an approach based on interactions at these environments. The ITCS can be regarded as a control system using the transmitted a system's intnetion. The interactive teleautonomous control does not mean the interaction from operators point of view only considering feedback environmental information and forward simulation but an interaction between the operator and the system that transmits or receives intentions. The proposed ITCS is based on the intention communication that transmits their intentions to each other. The ITCS can correctly control the system in accordance with the operator's intention. Using the intention communication, a system intention is helpful to the operator. In the interactive teleautonomous control, the intention communication has to be provided by the interaction between the operator and the system.

• 대한전자공학회논문지TC
• /
• 제48권10호
• /
• pp.29-34
• /
• 2011

본 논문에서는 멀티 홉 무선 네트워크의 처리율을 향상시킬 수 있는 멀티라디오/멀티채널에서의 네트워크 코딩 방법을 제시한다. 무선 네트워크의 처리율은 노드간 동일 채널 간섭과 무선 링크의 전송손실에 의해 제한을 받는다. 무선 네트워크에서 멀티라디오/멀티채널 환경은 무선노드의 채널 간섭 및 채널 경쟁을 줄여 주며, 네트워크 코딩은 스케줄링의 복잡성을 줄이고 링크의 사용을 늘려 처리율 증가를 가져올 수 있다. 본 논문에서는 멀티 홉 네트워크상에서 효율적인 처리율 향상을 위해 네트워크의 수학적 모델링과 선형계획법을 이용하여 인트라세션 네트워크 코딩에서의 채널 할당 및 전송 스케줄링 방법을 제안한다. 또한 AMPL과 CPLEX를 이용하여 인트라세션 네트워크 코딩 방법의 성능을 시험한다. 시험결과 멀티 홉 무선 네트워크의 인트라세션 네트워크 코딩이 일반적인 라우팅보다 처리율의 향상을 가져온다.