• 폴리머
• /
• 제34권1호
• /
• pp.38-44
• /
• 2010

탄산칼슘/유기계 core-shell 입자를 제조하기 위해 core로는 침강성 탄산칼습을 사용하였고, shell로서는 여러 종류의 methyl methacrylate(MMA), ethyl acrylate(EA), n-butyl acrylate(BA), styrene(St), 2-ethylhexyl acylate(2-EHA)을 사용하여, 반응 온도 유화제, 개시제의 종류와 첨가량을 변화시킨 후에 유화중합을 시켜 최적의 유화중합 조건을 구하였다. 생성된 core-shell 입자의 구조는 FT-IR로, 입자크기와 형태는 입도 분석, SEM, TEM으로 각각 측정하였다. 그리고, 이 core-shell 입자에 부직포를 함침시켜 처리전후의 표면변화는 접촉각으로 확인하였다. 또한, 함침 처리 전후의 부직포/부직포 소재와 관능성 단량체 첨가한 부직포/부직포 소재의 박리 접착강도를 측정하여 상호 비교하였다. 탄산칼슘/유기 core-shell 입자 합성의 경우에는 유화제인 SDBS를 0.5 wt% 첨가한 탄산칼슘을 core로 하여 MMA와 0.1 wt% 농도의 APS를 단계적으로 주입하여 중합함으로써 탄산칼슘입자 표면에 단량체의 중합이 잘 유도될 수 있었으며 중합 도중에 새로운 중합체 입자의 생성이 적었다.

• Fibers and Polymers
• /
• 제4권4호
• /
• pp.182-187
• /
• 2003

Low molecular weight copolymers of maleic anhydride and vinyl acetate were prepared to develop formaldehyde free cross-linking agents. Since lower molecular weight is favorable for efficient penetration of the finishing agent into the cotton fibers in the padding process, the concentration of the initiator, chain transfer agent and the monomer ratios were varied to obtain copolymers of low molecular weights. The prepared polymers were characterized by GPC, $^1{H-NMR}$, FTIR, DSC and TGA. Copolymers of molecular weights of 2 000 to 10 000 were obtained and it was found that the most efficient method of controlling the molecular weight was by varying the monomer ratios. Poly(maleic anhydride-co-vinyl acetate) did not dissolve in water, but the maleic anhydride residue hydrolyzed within a few minutes to form poly(maleic acid-co-vinyl acetate) and dissolved in water. However, the maleic acid units undergo dehydration to form anhydride groups on heating above ${160}^{\circ}C$ to some extent even in the absence of catalysts. The possibility of using the copolymers as durable press finishing agent for cotton fabric was investigated. Lower molecular weight poly(maleic anhydride-co-vinyl acetate) copolymers were more efficient in introducing crease resistance, which appears to be due to the more efficient penetration of the cross-linking agent into cotton fabrics. The wrinkle recovery angles of cotton fabrics treated with poly(maleic anhydride-co-vinyl acetate) copolymers were slightly lower than those treated with DMDHEU and were higher when higher curing temperatures or higher concentrations of copolymer were used, and when catalyst, $NaH_2$$PO_2$, was added. The strength retention of the poly(maleic anhydride-co-vinyl acetate) treated cotton fabrics was excellent.

• 폴리머
• /
• 제39권1호
• /
• pp.13-22
• /
• 2015

A new methacrylate copolymer that includes chalcone as a side group, poly(4-methacryloyloxyphenyl-4'-methoxystyryl ketone-co-styrene) was synthesized by free radical copolymerization. FTIR and $^1H$ NMR spectroscopic techniques were used to characterize the homopolymers and copolymers. The copolymerizations were carried out to high conversions. Copolymer compositions were established by $^1H$ NMR spectra analysis. The monomer reactivity ratios for copolymer system were determined by the linearized Kelen $T{\ddot{u}}d{\ddot{o}}s$, and Extended Kelen $T{\ddot{u}}d{\ddot{o}}s$ methods and a non-linear least squares method. The molecular weights and polydispersity index of copolymers were measured by using the gel permeation chromatography (GPC). The effect of copolymer compositions on their thermal behavior were studied by differential scanning calorimetry and thermogravimetric analysis methods. The optical properties of the resulting copolymer were also investigated.

• 한국염색가공학회지
• /
• 제23권3호
• /
• pp.155-162
• /
• 2011

para-Aramid has limited dyeability because of its highly crystalline structure and compactness. To improve the dyeability of the para-aramid to reactive dyes of bright color in deep shade, the fabrics were photografted under continuous UV irradiation with dimethylaminopropyl methacrylamide and 4-benzoyl benzoic acid as a monomer and a hydrogen -abstractable photoinitiator respectively. A UV energy of 35J/$cm^2$ and a photoinitiator concentration of ten percent or more with respect to the monomer in the formulation was required for optimal photografting. Grafting yield increased with higher monomer application level. Surface analysis indicated significant alterations in the atomic composition of the photografted fabric surface and the fabric surface was covered with the grafted polymers. While the pristine para-aramid fabrics showed no appreciable dyeability to the ${\alpha}$-bromoacrylamide reactive dyes, the grafted para-aramid fabrics enhanced the dyeability to the reactive dyes substantially. In case of C.I. Reactive Blue 50, a K/S value of 8.7 can be obtained with the grafted para-aramid fabrics with a grafting yield of 2.3 %. Also the color fastness properties of the dyed fabrics was excellent in the conditions of washing, rubbing and light irradiation.

• Korean Chemical Engineering Research
• /
• 제43권1호
• /
• pp.21-26
• /
• 2005

초임계 이산화탄소를 이용하여 다공성 고분자 모노리스를 제조하는 실험적 연구를 행하여, 단량체의 종류와 중합반응 조건들이 생성되는 고분자 모노리스의 물성에 미치는 영향을 실험적으로 조사하였다. 중합반응은 반응이 진행되는 동안 반응물의 상변화를 관찰할 수 있도록 사파이어 창을 부착한 고압 반응기 내에서 진행되었으며, 단량체의 농도가 매우 낮은 경우를 제외하고는 반응기 내부형태와 동일한 형상의 건조하고 다공성인 고분자 모노리스를 얻었을 수 있었다. 생성되는 고분자 모노리스의 비 표면적은 반응혼합물 중의 단량체 농도와 중합반응 압력에 따라 증가하였으며, 기계적 강도는 경도 보강제 MMA를 첨가하여 증대시킬 수 있었다.

• Environmental Engineering Research
• /
• 제11권4호
• /
• pp.208-216
• /
• 2006

In order to create a single flocculant/dual flocculation system, polyacrylamide-co-trimethyl ammonium ethyl acrylate chloride (TAEAC) polymers with varying molecular weights and structures were prepared for use of flocculants. The higher the cationic density of the polymer is higher, the higher was the conversion rate and the ratio of monomer. An acrylamide as nonionic monomer was less reactive than a TAEAC as cationic monomer. The branched polymer which was polymerized with a cross-linking agent, N, N-methylene bis-acrylamide had a higher stability and higher viscosity than a linear polymer but its dewatering efficiency was poor in a single flocculation system. In the case of single flocculant/dual flocculation, the branched polymer has better flocculation efficiency and the water content of the dewatered cakes was lower than the others, as the result of a re-flocculation effect. The optimum conditions for dual flocculation are a sequence in which the $1^{st}$ and $2^{nd}$ dosage are 75% and 25%/total dosage of a single flocculation system. The dewatering efficiency of a dual flocculation system is improved considerably from 10 to 25% under the experimental conditions used herein.

• 대한화학회지
• /
• 제62권3호
• /
• pp.191-202
• /
• 2018

The aim of this work is to study Monte Carlo simulation of ethylene (co)polymerization over Ziegler-Natta catalyst as investigated by Chen et al. The results revealed that the Monte Carlo simulation was similar to sum square error (SSE) model to prediction of stage II and III of polymerization. In the case of activation stage (stage I) both model had slightly deviation from experimental results. The modeling results demonstrated that in homopolymerization, SSE was superior to predict polymerization rate in current stage while for copolymerization, Monte Carlo had preferable prediction. The Monte Carlo simulation approved the SSE results to determine role of each site in total polymerization rate and revealed that homopolymerization rate changed from site to site and order of center was different compared to copolymerization. The polymer yield was reduced by addition of hydrogen amount however there was no specific effect on uptake curve which was predicted by Monte Carlo simulation with good accuracy. In the case of copolymerization it was evolved that monomer chain length and monomer concentration influenced the rate of polymerization as rate of polymerization reduced from 1-hexene to 1-octene and increased when monomer concentration proliferate.

• 청정기술
• /
• 제11권3호
• /
• pp.141-146
• /
• 2005

초임게 이산화탄소를 용매 및 팽윤제로 사용하여 함침 및 라디칼 중합으로 폴리프로필렌막에 스타이렌(styrene)을 그래프팅 시켰다. 모노머인 스타이렌의 양을 변수로 조절해가면서 막을 제조하였다. 초임계 함침, 중합 공정을 통해 만들어진 술폰화된 폴리스타이렌을 그래프팅한 폴리프로필렌 막 (PP-g-pssa)을 다양한 방범으로 특성화하였다. SEM과 EDS을 통하여 그래프팅 막의 표면 및 구조, 술폰화 여부를 분석하였다. 모노머의 양이 증가할수록 메탄올 투과도는 감소하고 이온 전도도와 전지 성능은 증가하다가, 스타이렌 모노머의 양이 1.5 g이상에서 제조된 막의 메탄올 투과도, 이온 전도도 및 전지 성능은 거의 유사한 값을 보였다.

• 한국산학기술학회논문지
• /
• 제14권10호
• /
• pp.5299-5303
• /
• 2013

Poly(butyl methacrylate-co-polyethyleneglycol methacrylate)(Poly(BMA-co-PEGMA)) microsphere은 침전중합법으로 에탄올 용액에서 제조하였으며 마이크로스페어의 입자 크기는 모노머인 BMA와 PEGMA의 농도조건에 따라 140-210nm까지 조절 할 수 있었다. PEGMA의 농도가 증가할 수록 마이크로스페어의 크기가 작아지는 반면 BMA의 농도가 증가하면 마이크로스페어의 입자크기가 증가하였다.

• 한국안전학회지
• /
• 제17권4호
• /
• pp.133-139
• /
• 2002

Core-shell polymers of inorganic/organic pair, which are consisted of both core and shell component, were synthesized by sequential emulsion polymerization using ethyl methacrylate (EMA) as a shell monomer and ammonium persulfate as initiator. We found that $CaCO_3$ core should be prepared by adding 2.0wt% SDBS(sodium dodecyl benzene sulfonate), $CaCO_3$ core/PEMA shell polymerization was carried out on the surface of $CaCO_3$ particle during EMA shell polymerization in the core-shell polymer preparation. The structure of core-shell polymer were investigated by measuring the degree on decomposition of $CaCO_3$ by HCI solution, thermal decomposition of polymer composite on thermogravimetric analyzer, glass transition temperature on differential scanning calorimeter, and morphology using scanning electron microscope.