• Structural Engineering and Mechanics
• /
• v.89 no.3
• /
• pp.253-263
• /
• 2024

Slope stability is generally paid more attention to in slope protection works, especially for slope containing weak layers. Two indexes of safety factor and failure model are selected to perform slope stability. Moreover, the finite element limit analysis method comprehensively combines the advantage of the limit analysis method and the finite element method obtaining the upper and lower bounds of the safety factor and the failure mode under the slope stability limit state. In this study, taking a waste dump containing a weak layer as an engineering background, the finite element limit analysis method is adopted to explore the potential failure mode. Meanwhile, the sensitivity analysis of slope stability is performed on geometrical and geotechnical parameters of the waste dump. The results show that the failure mode of the waste dump slope is two wedges if the weak layer is located on the ground surface (Model A), while the slope can be observed as three wedges failure if the weak layer is below the ground surface (Model B). In addition, both failure modes are highly sensitive to the friction angle of the weak layer and the shear strength of waste disposal, and moderately sensitive to the heap height, the dip angle and cohesion of the weak layer, while the toe cutting has limited effect on the slope stability. Moreover, the sensitivity to the excavation of the ground depends on the location of the weak layer and failure mode.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.5
• /
• pp.179-186
• /
• 2021

We need measures that can come up with alternative about fishery living zone and enhance local acceptance for responding to the increase in the proportion of renewable energy production and construction of 12GW Offshore wind power according to Korea's Renewable Energy 3020 initiative and Korean-version New Deal. In this study, We suggest that differentiation plans of co-location model in connection with offshore wind power generation suitable for the East Sea. The East Sea is an optimal site for building of a floating offshore wind power generation(FOWPG) field. It is expected that economic effects like energy production, aquatic resource development and tourism industrialization by farming bluefin tuna which is high valued fish and suitable for offshore aquaculture on public waters in FOWPG field. And we can confirm that budget reduction, smart management by sharing operation management technology and increase in fishermen income.

• Journal of the Korean Society of Safety
• /
• v.30 no.6
• /
• pp.94-101
• /
• 2015

When a severe disaster such as a building collapse occurs, a first priority for rapid rescue is to find a location where people are highly expected to be buried but alive. It is, however, very difficult to correctly designate the location of such cavities by conventional geophysical survey due to a pile of debris of building members. In this study, location of possible lifeguard cavities were evaluated through a series of simulations of building collapse by explosion depending on the height of the building, a structure of basement floor and a location of explosion. Three types of building structure: five-story, ten-story and fifteen-story were prepared as a model for the simulation. As a results, in the case of low building, only basement floor partially collapsed. On the other hand, in the case of high building, a collapsed range on the inside of the building increased and lifeguard spaces were formed only in the lateral side or corner of the building. In addition, when a wall exists in the basement floor, the possibility that cavities could be formed increased compared to the cases without wall. However, for the fifteen-story building case, no possible lifeguard cavity was found. It is noted that for a high rise building, the height of building more affect forming of safeguard cavity than the structure of the basement floor.

• 한국연소학회:학술대회논문집
• /
• 2000.05a
• /
• pp.152-161
• /
• 2000

The catalytically stabilized combustion of $CH_4$-air mixture on platinum catalyst was investigated numerically using a 2-D boundary layer model with detailed heterogeneous and homogeneous chemistries. The actual surface site density of monolith coated with platinum was decided by the comparison with experimental data. The comparisons were made between results for cases where only heterogeneous chemistry was allowed and both heterogeneous and homogeneous chemistries were allowed. It was found that the homogeneous reaction in the monolith had little effect on the change of temperature profile, methane conversion rate and light off location. The contributions of each reactions related with CO formation were discussed on the surface. The effects of operation conditions such as equivalence ratio, temperature, velocity and pressure at the entrance were studied. In thermal combustor, CO and NOx was produced less than 1 ppm at the exit and the production of $N_{2}O$ was more dominant than that of NO.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.4
• /
• pp.1-9
• /
• 2012

Decisions on reliability screening rules and burn-in policies are determined based on the estimated reliability. The variability in a semiconductor manufacturing process does not only causes quality problems but it also makes reliability estimation more complicated. This study investigates the nonuniformity characteristics of integrated circuit reliability according to defect density distribution within a wafer and between wafers then develops optimal burn-in policy based on the estimated reliability. New reliability estimation model based on yield information is developed using a spatial stochastic process. Spatial defect density variation is reflected in the reliability estimation, and the defect densities of each die location are considered as input variables of the burn-in optimization. Reliability screening and optimal burn-in policy subject to the burn-in cost minimization is examined, and numerical experiments are conducted.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.4
• /
• pp.124-137
• /
• 2018

The main purpose of this study is to find the hotspots of crimes that occur frequently in the space and to derive the appropriate CCTV installation location. One of the characteristics of crime is clustered around past occurrence area, and these crimes are strongly correlated. It is also possible to find the cause of the clusters and the variables that affect the crime through the history of the crime. In addition to the traditional OLS model, spatial differential model including spatial autocorrelation and spatial error model were used to select the variables influencing the five major crime rate, the theft rate and the foreign resident rate. The variables affecting the Five major crimes were positive (+) sign for the welfare and the rate of the bar cluster rate, and negative (-) for the street density. The CCTV area occupies 46% of the hotspots based on the overlapping of the areas where the elderly people are crowded, the bar cluster, many multicultural families, and the areas with low density of street lamps. It turned out. Taking into account the current CCTV operation, the total number of new cases to cover the risk point was 89.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.3
• /
• pp.99-106
• /
• 2019

Technology that cannot be excluded from 4th industry is self-driving sector. The self-driving sector can be seen as a key set of technologies in the fourth industry, especially in the DB sector is getting more and more popular as a business. The DB, which was previously produced and managed in two dimensions, is now evolving into three dimensions. Among the data obtained by Mobile Mapping System () to produce the HD MAP necessary for self-driving, Point Cloud, which is LiDAR data, is used as a DB because it contains accurate location information. However, at present, it is not widely used as a base data for 3D modeling in addition to HD MAP production. In this study, MMS Point Cloud was used to extract facilities around the road and to overlay the location to expand the usability of Point Cloud. Building utility poles and communication poles DB from Point Cloud and comparing road name address base and location, it is believed that the accuracy of the location of the facility DB extracted from Point Cloud is also higher than the basic road name address of the road, It is necessary to study the expansion of the facility field sufficiently.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.12
• /
• pp.61-69
• /
• 2013

As construction for road and train tunnel is increasing, various geotechnical conditions can be faced during the construction stage. Especially, if the tunnel is located in limestone area, the cavity is mostly to locate in tunnel planning location. One or some cavities which can be harmful for tunnel safety are predicted. Hence, this study was fulfilled to confirm the influence between tunnel and cavity using laboratory scale down model test and numerical analysis. The scale down model test was carried out to confirm the failure load of the model ground about the interval length of cavity and tunnel and to analyze behaviour characteristics of the model ground on the cavity shape. From the model test result, the failure load decrease in accordance with decreasing of interval length between cavity and tunnel within 0.5D. The numerical analyses were carried out for verification about scale down model test. From the numerical analysis result, tunnel safety decreases in the case of the interval between cavity and tunnel within 0.5D.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.2
• /
• pp.35-46
• /
• 2020

In this study, the dynamic response characteristics of the embankment model were analyzed using shaking table experiments. Laminar shear box was used to minimize the boundary effect of the model. The ratio of the vertical length to horizontal length of the slopes were 1:1, 1:1.5, and 1:2. The sensor array which is consist of 12 accelerometers was used to measure acceleration time-histories at each location of the slope model. The dynamic response characteristics of the models were analyzed for sine wave, sinesweep wave, and artificial earthquake wave in this study. The experimental results show that the dynamic response of the embankment model is increased with the slope angle. Furthermore, the experimental setup used in this study was verified with the comparative analysis between experimental results and 1-D analytical simulation on the flat ground model.

• World Technopolis Review
• /
• v.4 no.1
• /
• pp.11-22
• /
• 2015

Globalization, increasing technological advancements and dynamic knowledge diffusion are moving our world closer together at a unique scale and pace. At the same time, our rapidly changing society is confronted with major challenges ranging from demographic to economic ones; challenges that necessitate highly innovative solutions, forcing us to reconsider the way that we actually innovate and create shared value. As such the linear, centralized innovation models of the past need to be replaced with new approaches; approaches that are based upon an open and collaborative, global network perspective where all innovation actors strategically network and collaborate, openly distribute their ideas and co-innovate/co-create in a global context utilizing our society's full innovation potential (Innovation 4.0 - Open Innovation 2.0). These emerging innovation paradigms create "an opportunity for a new entrepreneurial renaissance which can drive a Cambrian like explosion of sustainable wealth creation" (Curley 2013). Thus, in order to materialize this entrepreneurial renaissance, it is critical not only to value but also to actively employ this new innovation paradigms so as to derive community-driven shared value that stems from global innovation networks. This paper argues that there is a gap in existing business incubation model that needs to be filled, in that the innovation and entrepreneurship community cannot afford to ignore the emerging innovation paradigms and rely upon closed incubation models but has to adopt an "open incubation" (Ziouvelou 2013). The open incubation model is based on the principles of open innovation, crowdsourcing and co-creation of shared value and enables individual users and innovation stakeholders to strategically network, find collaborators and partners, co-create ideas and prototypes, share their ideas/prototypes and utilize the wisdom of the crowd to assess the value of these project ideas/prototypes, while at the same time find connections/partners, business and technical information, knowledge on start-up related topics, online tools, online content, open data and open educational material and most importantly access to capital and crowd-funding. By introducing a new incubation phase, namely the "interest phase", open incubation bridges the gap between entrepreneurial need and action and addresses the wantpreneurial needs during the innovation conception phase. In this context one such ecosystem that aligns fully with the open incubation model and theoretical approach, is the VOICE ecosystem. VOICE is an international, community-driven innovation and entrepreneurship ecosystem based on open innovation, crowdsourcing and co-creation principles that has no physical location as opposed to traditional business incubators. VOICE aims to tap into the collective intelligence of the crowd and turn their entrepreneurial interest or need into a collaborative project that will result into a prototype and to a successful "crowd-venture".