• Title/Summary/Keyword: co-anion

Search Result 264, Processing Time 0.031 seconds

Removal of Orthophosphate Ions from Aqueous Solutions Using the Anion Exchange Resin in the Form of $Cl^-$ Ion ($Cl^-$ 형태의 음이온 교환 수지를 이용한 오쏘인산 이온의 제거에 관한 연구)

  • Kim, Ki-Chul;Park, Su-Jin;Cha, Ran;Jeong, Tae-Young;Chung, Hyung-Keun
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.34 no.3
    • /
    • pp.162-167
    • /
    • 2012
  • The removal of orthophosphate ions from aqueous solutions by the anion exchange resin in the form of $Cl^-$ ion was investigated to elucidate the ion exchange mechanism which depends on the forms of orhthophoshate ions. In addition, the effects of alkalinity and other common anions were studied. The results showed that the orhthophosphate ions with the oxidation state of 2 and 3 ($HPO{_4}^{2-}$ and $PO{_4}^{3-}$) were effectively removed by the anion exchange resin, whereas the part of the $H_2PO_4{^-}$ ion passed through the ion exchange column. This suggested that the affinity of $H_2PO_4{^-}$ to the ion exchange resin was comparable with that of $Cl^-$ ion. In all cases, the effluent pHs have shown to be much lower than the calculated values, indicating that more $Cl^-$ ions than the orthophosphate equivalents in the influent were eluded. As the alkalinity increases, the decrease in pH was minimized. When the alkalinity was 100 mg/L ($CaCO_3$) or greater, 100 mg/L orthophosphate ions including $H_2PO_4{^-}$ were completely removed. The common anions such as $SO{_4}^{2-}$ and $NO_3{^-}$ were also removed by the anion exchange resin, and thus decreased the ion exchange capacity for the removal of orthophosphate.

A Review on SEBS Block Copolymer based Anion Exchange Membranes for Water Electrolysis (SEBS 블록 공중합체를 기반으로 한 수전해용 음이온 교환막에 대한 총설)

  • Kim, Ji Eun;Park, Hyeonjung;Choi, Yong Woo;Lee, Jae Hun
    • Membrane Journal
    • /
    • v.32 no.5
    • /
    • pp.283-291
    • /
    • 2022
  • Hydrogen energy has received much attention as a solution to the supply of renewable energy and to respond to climate change. Hydrogen is the most suitable candidate of storing unused electric power in a large-capacity long cycle. Among the technologies for producing hydrogen, water electrolysis is known as an eco-friendly hydrogen production technology that produces hydrogen without carbon dioxide generation by water splitting reaction. Membranes in water electrolysis system physically separate the anode and the cathode, but also prevent mixing of generated hydrogen and oxygen gases and facilitate ion transfer to complete circuit. In particular, the key to next-generation anion exchange membrane that can compensate for the shortcomings of conventional water electrolysis technologies is to develop high performance anion exchange membrane. Many studies are conducted to have high ion conductivity and excellent durability in an alkaline environment simultaneously, and various materials are being searched. In this review, we will discuss the research trends and points to move forward by looking at the research on anion exchange membranes based on commercial polystyrene-b-poly(ethylene-co-butylene)-b-polystyrene (SEBS) block copolymers.

Solubility of carbon dioxide in ionic liquids with methylsulfate anion (Methylsulfate 음이온을 갖는 이온성 액체에 대한 이산화탄소의 용해도)

  • Jung, Jun-Young;Lee, Byung-Chul
    • Analytical Science and Technology
    • /
    • v.24 no.6
    • /
    • pp.467-476
    • /
    • 2011
  • Solubility data of carbon dioxide ($CO_2$) in the imidazolium-based ionic liquids with methylsulfate anion are presented at pressures up to about 45 MPa and at temperatures between 303.15 K and 343.15 K. The ionic liquids studied in this work were 1-ethyl-3-methylimidazolium methylsulfate ([emim][$mSO_4$]), 1-butyl-3-methylimidazolium methylsulfate ([bmim][$mSO_4$]). The solubilities of $CO_2$ were determined by measuring the bubble point or cloud point pressures of the binary mixtures using a high-pressure equilibrium apparatus equipped with a variable-volume view cell. The equilibrium pressure increased very steeply at high $CO_2$ compositions. The $CO_2$ solubility in ionic liquids increased with increase of the total length of alkyl chains attached to the imidazolium cation of the ionic liquids. The phase equilibrium data for the $CO_2$ + ionic liquid systems have been correlated using the Peng-Robinson equation of state.

Sol-Gel Encapsulation as Matrix for Potentiometric Nitrite-Selective Membranes Doped with Chloro (5, 10, 15, 20-Tetraphenylporphyrinato) Cobalt (III)

  • Zhou, Hao;Meyerhoff, Mark E.;Bi, Kai-Shun;Park, Sung-Bae
    • Journal of the Korean Electrochemical Society
    • /
    • v.12 no.4
    • /
    • pp.335-341
    • /
    • 2009
  • Organic-inorganic hybrid sol-gel matrices were used as hosts for chloro (5, 10, 15, 20-tetraphenylporphyrinato) cobalt (III) (Co[TPP]Cl), a known ionophore for nitrite. The sol-gel precursor was prepared by the reaction of (3-isocyanopropyl) triethoxysilane with 1,4-butanediol. An appropriate amount of the anion-exchanger, tridodecylmethylammonium chloride (TDMAC) and the plasticizer, tributylphosphate (DBP) were used as membrane additives. On mixing with an acidic catalyst, the sol-state precursors slowly gelled, yielding a membrane in which the active components, Co[TPP]Cl and TDMAC, were encapsulated. The performances of the sol-gel membrane-based electrodes were compared to those of Co[TPP]Cl-based poly(vinyl chloride) (PVC) membrane electrodes. Membranes with a molar ratio of Co[TPP]Cl: TDMAC (1 : 0.1) showed reasonable response slopes toward nitrite. The response slopes were typically 53 mV/decade between $10^{-5.4}$ and $10^{-1.0}\;M$. Selectivities toward nitrite over hydrophilic and small anions such as chloride were somewhat inferior to those observed with PVC-based membranes, but selectivities over lipophilic anions were quite similar. Reduced asymmetry potentials due to protein adsorption were found to occur with the sol-gel matrix relative to PVC-based films when the sensors were employed as a detector in flow-through configuration.

A New Acetate Selective Polyamine Receptor Based on Anthracene and 4-Nitrophenyl Group

  • Lee, Sung-Kyu;Kang, Jong-Min
    • Bulletin of the Korean Chemical Society
    • /
    • v.32 no.4
    • /
    • pp.1228-1230
    • /
    • 2011
  • A new amine receptor 2 utilizing anthracene and nitrophenyl group as signaling group was designed and synthesized. The receptor 2 only utilizes four amine N-H's and 9-anthracenyl hydrogen to bind anions. The receptor 2 can bind anions through hydrogen bonds with a selectivity of $CH_3CO_2^-$ > $H_2PO_4^-$ > $F^-$ > $C_6H_5CO_2^-$ > $Cl^-$ in highly polar solvent such as DMSO without protonation of amine.

Dicyanoanthracene and Biphenyl Co-sensitized Photooxygenation of 1,1-Diphenyl-2-vinylcyclopropane

  • Shim, Sang-Chul;Song, Jeong-Sup
    • Bulletin of the Korean Chemical Society
    • /
    • v.7 no.2
    • /
    • pp.150-153
    • /
    • 1986
  • Co-sensitized photooxygenation of 1,1-diphenyl-2-vinylcyclopropane (VCP-DPh) with 9,10-dicyanoanthracene and biphenyl in oxygen-saturated acetonitrile solution produced 3,3-diphenyl-5-vinyl-1,2-dioxolane as the major product. The same photoproduct was obtained by acetone sensitized photooxygenation in oxygen-saturated acetone solution. However, VCP-DPh remained intact when directly irradiated with DCA or irradiated with Rose Bengal to generate singlet oxygen. A mechanism involving a cosensitizer radical cation and sensitizer radical anion is proposed.

Synthesis and Ion Conducting Properties of Anion Exchange Membranes Based on PBI Copolymers for Alkaline Fuel Cells (PBI 공중합체를 이용한 알카라인 연료전지용 음이온교환막의 합성과 이온전도특성)

  • Lee, Dong-Hoon;Kim, Se-Jong;Nam, Sang-Yong;Kim, Hyonng-Juhn
    • Membrane Journal
    • /
    • v.20 no.3
    • /
    • pp.217-221
    • /
    • 2010
  • In order to overcome the drawback of proton exchange membrane fuel cells (PEMFCs), solid alkalime membrane fuel cells (SAMFCs) have been studied. In this report, we synthesized new sulfonated polybenzimidazole derivatives for SAMFCs. The polyimidazole derivatives were doped by KOH, and base-doped polybenzimidazoles showed high hydroxy ion conductivity and excellent mechanical properties. Especially, sPBI-co-PBI (75 : 25 for molar ratio of sulfonated and non-sulfonated moiety) showed good possibility for the anion exchange membrane. It has $2.98{\times}10^{-2}\;S/cm$ at $90^{\circ}C$ under 100% relative humidity.

Adsorption Characteristics of Strong Basic Anion Exchanger to Cellulose Reactive Dye (강 염기성 음이온 교환수지의 셀룰로우스 섬유용 반응성 염료에 대한 흡착 특성)

  • Lim, Gyeong-Eun;Chung, Paul-gene;Kwon, Ji-Young
    • Journal of Korean Society on Water Environment
    • /
    • v.23 no.1
    • /
    • pp.27-32
    • /
    • 2007
  • This study focused on estimating the feasibility of a strong basic anion exchanger (PA312OH) as a sorbent for the removal of residual reactive dye and saving chemicals and water. Cellulose reactive dye C.I.RB49 was tested because reactive dye is the largest single group of dyes and that dye needs larger amount of inorganic salts as dyeing agent but nearly 50% of reactive dyes may be lost to the effluent. The adsorption characteristics of PA312OH for C.I.RB49 were as follows. Ion-selectivity among the dye and inorganic salts was Dye > ${SO_4}^{2-}$ > ${CO_3}^{2-}$ > $Cl^-$. C.I.RB49 was exchanged more than 3 times ${SO_4}^{2-}$ and ${CO_3}^{2-}$ and $Cl^-$ was not exchanged absolutely. The exchanging velocity was increased exponentially with increasing temperature. This result is positive effect on treating the high temperature dyeing process wastewater. The exchanged dye percents to initial were 96.8% and 99% at flow rate 20.5 mL/min. and 3.7 mL/min.. The exchanging capacity of PA312OH for C.I.RB49 was 215.2 mg/g at conc.=369.2 mg/L, Temp.=$25^{\circ}C$. 74% inorganic salts were recrystallized from real dark reactive color dyeing wastewater treated with PA312OH.

Volume Expansion of Ionic Liquids in the Presence of Supercritical Carbon Dioxide (초임계이산화탄소의 존재 하에서 이온성액체의 부피팽창)

  • Lim, Bang-Hyun;Shim, Jae-Jin
    • Clean Technology
    • /
    • v.14 no.4
    • /
    • pp.248-255
    • /
    • 2008
  • The volume expansion of three ionic liquids (ILs) in the presence of supercritical carbon dioxide has been measured at pressures up to 32 MPa and at temperatures from 313.15 to 333.15 K in a high-pressure view cell. The imidazolium-derivative ionic liquids 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][$PF_6$]), 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][$BF_4$]), and 1-octyl-3-methylimidazolium tetrafluoroborate ([omim][$BF_4$]) were employed in this research. The effects of pressure, temperature, nature of anion and cation as well as the water content on the volume expansion of ILs by absorbing $CO_2$ were investigated experimentally. The volume expansion was higher for the ILs with longer cationic alkyl group and for the ILs with lower anion polarity. The lower the water content, the lower the temperature, or the higher the pressure, the higher was the expansion of IL phase.

  • PDF