• Journal of Preventive Medicine and Public Health
• /
• v.31 no.1 s.60
• /
• pp.59-71
• /
• 1998

To examine the association of hypertension with cluster of obesity, abnormal glucose and dyslipidemia in Korean urban population, we conducted this cross-sectional study among 3027 men and 2127 women age 20-85 years who visited a prevention center between May 1991 and June 1995 for a multiphasic health check at St. Mary's Hospital, Seoul. By the self-administered questionnaire, the informations of educational attainments, monthly income, alcohol consumption, cigarette smoking, and physical excercise level were obtained. Height, weight, and blood pressure were measured by a trained nurse. The fasting blood sugar (FBS), total cholesterol, high density lipoprotein (HDL) cholesterol and triglyceride were tested by enzyme method. Low density lipoprotein (LDL) cholesterol was calculated by 'total cholesterol - HDL cholesterol - triglyceride/5'. For testing the differences of cardiovascular risk factors between hypertension and normotension group, 1-test and $\chi^2$-test were performed. For the age adjusted odds ratios of hypertension in persons with obesity, abnormal glucose, and dyslipidemia compared with normal, logistic regression was performed by using SAS pakageprograme. The results obtained were as follows: 1. Age, weight, body mass index(BMI), blood glucose, total cholesterol, LDL cholesterol, and triglyceride of hypertension group in men and women were significantly higher than normotension group, but height and HDL cholesterol of hypertension group only in women significantly lower than normotension group. The frequency of obesity $(BMI\geq25kg/m^2)$, abnormal glucose $(\geq\;120mg/dl)$, hypercholesterolemia $(\geq\;240mg/dl)$, lower HDL cholesterol (<45 mg/dl in women only), higher LDL cholesterol $(\geq\;160mg/dl)$, and hyper hypertriglyceridemia $(\geq\;250mg/dl)$ in hypertension group of men and women were significantly higher than normotension group. 2. Systolic and diastolic blood pressure were negatively correlated with hight, but positively with age, weight, BMI, total cholesterol, LDL cholesterol, and triglyceride in men and women. BMI was positively correlated with fasting blood sugar, total cholesterol, LDL cholesterol and triglyceride but negatively with HDL cholesterol. 3. The age adjusted odds ratios of hypertension were as follows in men and women : among persons who were obese compared with those nonobese, 2.53 (95% Confidence Intervals [C.I.] 2.08-3.07) and 2.22 (95%C.I. 1.71-2.87): among persons who were abnormal glucose compared with those normoglycemic, 1.43 (95%C.I 1.13-1.82) and 2.01 (95%C.I 1.36-2.94): and among persons who were dyslipidemia (hypercholesterolemia or lower HDL cholesterol or higher LDL cholesterol or hypertriglyceridemia) compared with those normal lipid, 1.59 (95%C.I 1.30-1.95) and 1.51 (95%C.I 1.16-1.96). After combined more than one risk factor, the odds ratios were increased. Among persons with cluster of obesity, abnormal glucose, and dyslipidemia, the odds ratio of hypertension was 2.25 (95%C.I 1.47-3.37) in men and 3.02 (95%C.I 1.71-5.30) in women. In conclusion, it was suggested that hypertension was associated with cluster of obesity, abnormal glucose, dyslipidemia in this Korean urban population.

• Journal of Plant Biotechnology
• /
• v.29 no.1
• /
• pp.19-23
• /
• 2002

This experiment was conducted to micropropagate bulblets via shoot cluster formation and massproduce normal bulblets from the sections of proliferated shoot clusters in Lilium asiatic hybrid 'Hae Hwa'. The induction of shoot clusters from the culture of bulblet sections was more effective than that of bulb scales on MS medium with 1.0 mg/L BA and 0.5 mg/L IAA. Proliferation of shoot clusters from the formed shoot cluster sections was the most favorable on medium containing 5.0 mg/L BA and 0.5 mg/L IAA. The formation and the growth of bulblets from shoot cluster sections were achieved effectively on medium with 60∼90 g/L sucrose. The leaves derived from shoot clusters grew vigorously but the bulblets from shoot clusters grew very poor in 5L air-lift bioreactor culture. By the addition of 30 mL fresh liquid medium containing doulble strength MS salts, 250 g/L sucrose and 5 g/L activated charcoal after 8 weeks in the shoot cluster culture on MS medium with 5.0 mg/L BA and 0.5 mg/L IAA, the number of bulblets was increased in light condition, but the growth of bulblets was not affected by light. Bulblet production was possible with the bulblet product at 53 to 68 mg in fresh weight by liquid medium addition after the proliferation of shoot cluster.

• Korea-Australia Rheology Journal
• /
• v.12 no.3_4
• /
• pp.157-163
• /
• 2000

We develop a simple model which can describe and explain abnormal stress relaxation of ABS melt for which stress dose not exponentially decay. The relaxation behavior of ABS melt consists of two distinct relaxation modes. One is the relaxation of the matrix phase similar to the case of homopolymer melt. The other is manifested by the collection of butadiene rubber particles, named as the cluster, where the particles are connected through the interaction between grafted SAN and matrix SAN. The second mode of the relaxation is characterized by the relaxation time, which is a function of the average size and the microscopic state of the cluster. Experimental results reveal that it can be represented as the product of the average size of the clusters by a function of internal variable that represents the fraction of strained SAN chains inside the cluster.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.10a
• /
• pp.40-47
• /
• 2000

One of the drawbacks of GA-based structural optimization is that the fitness evaluation of a population of hundreds of individuals requiring hundreds of structural analyses at each CA generation is computational too expensive. Therefore, a parallel genetic algorithm is developed for structural optimization on a cluster of personal computers in this paper. Based on the parallel genetic algorithm, a population at every generation is partitioned into a number of sub-populations equal to the number of slave computers. Parallelism is exploited at sub-population level by allocationg each sub-population to a slave computer. Thus, fitness of a population at each generation can be concurrently evaluated on a cluster of personal computers. For implementation of the algorithm a virtual distributed computing system in a collection of personal computers connected via a 100 Mb/s Ethernet LAN. The algorithm is applied to the minimum weight design of a steel structure. The results show that the computational time requied for serial GA-based structural optimization process is drastically reduced.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.9
• /
• pp.739-746
• /
• 1991

This paper develops a modified multilayer perceptron architecture which speeds up learning as well as the net's mapping accuracy. In Phase I, a cluster partitioning algorithm like the Kohonen's self-organizing feature map or the leader clustering algorithm is used as the front end that determines the cluster to which the input data belongs. In Phase II, this cluster selects a subset of the hidden layer nodes that combines the input and outputs nodes into a subnet of the full scale backpropagation network. The proposed net has been applied to two mapping problems, one rather smooth and the other highly nonlinear. Namely, the inverse kinematic problem for a 3-link robot manipulator and the 5-bit parity mapping have been chosen as examples. The results demonstrate the proposed net's superior accuracy and convergence properties over the original backpropagation network or its existing improvement techniques.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.327-332
• /
• 2005

This paper aims to analysis for evaluation factor and success prediction of port innovative cluster. This paper is divided three factors such ac policy, source and operation. In addition, three factors are divided into the twelve detail factors. the weight of each factor is calculated by Kohonen Network. At the result, this paper places the priority on the source factor.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.429-436
• /
• 2009

We conducted a QTL analysis of grain quality traits using 117 $BC_3F_4$ and $BC_3F_5$ lines developed from a cross between Ilpumbyeo and Moroberekan. Genotypes of 117 $BC_3F_5$ lines were determined using 134 simple sequence repeat (SSR) markers. A linkage map constructed using 134 SSR markers was employed to characterize quantitative trait loci (QTL). The 117 $BC_3F_4$ and $BC_3F_5$ lines were evaluated for eleven grain quality traits in 2005 and 2006. A total of 18 QTLs were identified for eleven traits, and the phenotypic variance explained by each QTL ranged from 9.9% to 35.2%. Moroberekan alleles contributed positive effects in the Ilpumbyeo background at two QTL loci for 1,000 grain weight. Four QTLs, two for chalky rice and one each for 1,000 grain weight and head rice were consistently detected in two consecutive years indicating that these QTLs are stable. Clusters of QTLs were observed in three chromosome regions. One cluster harboring five QTLs including head rice and brown rice ratio near SSR markers RM190 and RM314 was detected on chromosome 6. Another cluster harboring grain weight and white belly was detected on chromosome 2. Increase in white belly at this locus might be due to the increase in grain weight due to the presence of the Moroberekan allele. The Moroberekan alleles at two QTL loci, gw3 and gw4 associated with increased grain weight might be useful in breeding programs to develop high-yielding cultivars.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.3
• /
• pp.976-990
• /
• 2020

The k-means algorithm is widely used in academia and industry due to easy and simple implementation, enabling fast learning for complex datasets. However, k-means struggles to classify datasets without prior knowledge of specific domains. We proposed the repulsive k-means (RK-means) algorithm in a previous study to improve the k-means algorithm, using the repulsive force concept, which allows deleting unnecessary cluster centroids. Accordingly, the RK-means enables to classifying of a dataset without domain knowledge. However, three main problems remain. The RK-means algorithm includes a cluster repulsive force offset, for clusters confined in other clusters, which can cause cluster locking; we were unable to prove RK-means provided optimal convergence in the previous study; and RK-means shown better performance only normalize term and weight. Therefore, this paper proposes the advanced RK-means (ARK-means) algorithm to resolve the RK-means problems. We establish an initialization strategy for deploying cluster centroids and define a metric for the ARK-means algorithm. Finally, we redefine the mass and normalize terms to close to the general dataset. We show ARK-means feasibility experimentally using blob and iris datasets. Experiment results verify the proposed ARK-means algorithm provides better performance than k-means, k'-means, and RK-means.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.2
• /
• pp.286-290
• /
• 2006

A genomic library of Streptococcus vestibularis ATCC49124 was constructed in an E. coli plasmid vector, and the urease-positive transformants harboring the urease gene cluster were isolated on Christensen-urea agar plates. The minimal DNA region required for urease activity was located in a 5.6 kb DNA fragment, and a DNA sequence analysis revealed the presence of a partial ureI gene and seven complete open reading frames, corresponding to ureA, B, C, E, F, G, and D, respectively. The nucleotide sequence over the entire ure gene cluster and 3'-end flanking region of S. vestibularis was up to 95% identical to that of S. salivarius, another closely related oral bacterium, and S. thermophilus, isolated from dairy products. The predicted amino acid sequences for the structural peptides were 98-100% identical to the corresponding peptides in S. salivarius and S. thermophilus, respectively, whereas those for the accessory proteins were 96-100% identical. The recombinant E. coli strain containing the S. vestibularis ure gene cluster expressed a high level of the functional urease holoenzyme when grown in a medium supplemented with 1 mM nickel chloride. The enzyme was purified over 49-fold by using DEAE-Sepharose FF, Superdex HR 200, and Mono-Q HR 5/5 column chromatography. The specific activity of the purified enzyme was 2,019 U/mg, and the Michaelis constant ($K_{m}$) of the enzyme was estimated to be 1.4 mM urea. A Superose 6HR gel filtration chromatography study demonstrated that the native molecular weight was about 196 kDa.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.8
• /
• pp.1386-1397
• /
• 2001

The purpose of this study was to classify and analyze the somatotype of early middle-aged women and to provide its total data for clothing construction, and to improve clothing culture. The subjects were 277 early middle-aged women between 35 and 44 years old. Data were collected through anthropometry and photometry and analyzed by factor analysis, cluster analysis and discriminant analysis. The results were as follows; 1. The result of factor analysis indicated that 10 factors were extracted through factor analysis and those factors comprised 86.13 percent of total variance. 2. Using factor scores, cluster analysis was carried out and the subject were classified into 4 cluster. Type 1 is tall, slim, and X type in front. Type 2 is standard height and weight, short upper body, and hip-protruded on the side. Type 3 is standard height, thin, H type in front, back and hip are clearly protruded, and lean-back type on the side. Type 4 is standard height, fat, and long upper body. 3. According to the stepwise discriminant analysis, the 8 important iems is classifying the somatotype of early middle-aged women are as follows : bust girth, back length hip breadth-waist breadth, back protruded point depth(back)-back waist depth(back), hip tangent tilt, hip depth(back) waist dapth(back), bust depth-waist depth, and cervical hight, The correct classification rate for these items is as exact as 83.20%.