• Journal of the Korean Society of Clothing and Textiles
• /
• v.12 no.2 s.27
• /
• pp.237-248
• /
• 1988

To access the appropriate height of sleeve cap which is required for the basic sleeve pattern according to arm movements, plaster gypsum experiment was performed. Arm movements were 5types ($0^{\circ},\;45^{\circ},\;90^{\circ},\;135^{\circ},\;180^{\circ}$) to the vertical directions in the front. The appropriateness of the pattern was analyzed by measuring clothing pressure. The results obtained were as follows: 1. Increasing the movement angle, sleeve width increased but height of sleeve cap and armhole girth decreased. 2. Increasing the movement angle, the acromion moved to the front part of bodice. 3. On the basis of the result of the height of sleeve cap, the $\frac{AH}{4} +2.5cm$ sleeve basic 4 pattern is suitable for the direction $M_1(0^{\circ}),\;M_2(45^{\circ})$, and the $\frac{AH}{5}$sleeve basic pattern is suitable for the direction $M_3(90^{\circ}),\;M_4(135^{\circ})$, and $M_5(180^{\circ})$. 4. As the movement angle and height of sleevecap increased, the part which receive high pressure increased and the difference between the hightest and the lowest clothing pressure increased. 5. By the variation of movement angle and height of sleevecap, clothing pressure of upperarm was affected more than that of shoulder blade. 6. The clothing pressure of upperarm and shoulder blades were more affected by the height of sleeve cap than the ease of breast area. 7. Considering the clothing pressure of various arm movement, the most appropriate height of sleeve cap for $M_1(0^{\circ}),\;M_2(45^{\circ})$ positions was to use the $\frac{AH}{4}$+2.5cm, and for $M_3(90^{\circ}),\;M_4(135^{\circ})$, and $M_5(180^{\circ})$, was $\frac{AH}{5}$.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.4
• /
• pp.55-67
• /
• 2019

This study analyzed the fabric and product size of the burn patient's custom compression garment and measured the pressure applied by the garment to assess whether proper pressure is being delivered for treatment. The test clothes were presented to the market by body size and commissioned with the same design. The subjects selected four people close to the average body size of men in their 20s determined by 7th Size Korea. The experiment was conducted by wearing a compression suit, performing activities and measuring changes in the pressure of the garment according to changes in posture. The fabric used for the compressive clothing was not ruptured even at 216 kPa, the elasticity recovery rate was measured between 80.5 and 94.5%. The product dimensions of the experimental clothing varied by up to 8cm from brand to brand, requiring the standardization of compression clothing. The experiment showed that four types of compression suit varied in pressure, and the pressure range, excluding the gastric arm (17.9mmHg), was between 2.5-14.1mmHg, which failed to meet the level of pressurization for treatment purposes. The clothing pressure in the chest area dropped when performing movements rather than standing still. This was interpreted to be a result of reduced the adhesion of the compression suit during operation. The peak pressure (31.68mmHg) and the lowest pressure (2.2mmHg) was noted in the scapula, indicating that no pressure was being transmitted on the vertebrae. The pressure of the garment on the right shoulder blade was elevated in a supine position. Because much time is spent laying down, it is necessary for the pattern design to accommodate for the increased clothing pressure on the shoulder blades. Standardization of the level of pressurization for burn patient's custom-made pressure suits for each stage of treatment is urgently required.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.4
• /
• pp.17-26
• /
• 2019

This research aims to obtain useful data on the development of compression garment products with high-stretch knitted materials. Using nylon SCY, four specimens were knitted. Then, appearance (width, length, weight, thickness), stretch property (stretch, recovery) and clothing pressure were measured and their interrelation was analyzed. In the comparison of appearance features, yarn floating caused shrinkage in both course and wale directions of the specimens. Yarn overlapping by tucking caused a release in the course direction and shrinkage in the wale direction. Also, structural change was affected by the weight and thickness change of the knitted fabric. In the analysis of fabric stretch, yarn floating reduced the extension in course direction and increased that in wale direction of the knitted fabric. However, yarn overlapping reduced the elongation in both directions. In the analysis of recovery, yarn floating and overlapping raised fabric recovery in both directions, and tuck structure was superior to float in recovery. In the analysis of clothing pressure, 'Plain-Float' structured fabrics showed a higher clothing pressure than 'Plain' and the clothing pressure value of 'Plain-Tuck' was lower than that of 'Plain'. As for the correlation between fabric appearance, stretch property, and clothing pressure, the appearance change in course direction had a major influence on the clothing pressure. The shrinkage of appearance led to a decrease in stretch and an increase in clothing pressure.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.4
• /
• pp.560-575
• /
• 2015

This study developed brassieres using a suspension system with the elastic panel on the inside of the brassiere cup to replace the wires for 20s women with large and elongated breasts. The following results were obtained by analyzing clothing pressure and a subjective evaluation of brassieres with elastic panels at the bottom or side of the various reduction ratios and with the shoulder straps of the brassiere. Brassieres with dual panels (rather than with only the bottom panel) lowered clothing pressure as well as improved wearing comfort and function. Compared to brassieres with a panel of 10%, brassieres with a panel of 15% lowered clothing pressure and provided superior wearing comfort. In this case, the higher the reduction ratio of the side panels increased clothing pressure on the shoulder, but provided superior well-fit, bust-up, and vibration restraint. To reduce the reduction ratio of the side panel decreased clothing pressure on the shoulder and decreased support functions. Therefore, the reduction ratio of the side panels should be determined by preferable functions such as wearing comfort that depend on the needs of the wearer. It is suggested that a brassiere with a dual elastic panel can replace the brassiere wire.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.5
• /
• pp.810-823
• /
• 2020

This study evaluated the effect of functional characteristics of the fabric for Bikram yoga clothing and fit measured in clothing pressure on the wearer's physiological response and perceptive sensation before and after exercise in hot conditions and during a resting period in standard conditions. The test garment consisted of two tops (T1, T2) and two pants (P1, P2) each with different functional characteristics of fabric. Using various combinations of the test garments, assessment of the thermal sensation and comfort was performed before/after yoga and after resting. This study revealed that thermal sensation and wearing comfort significantly changed based on the functionality of the fabric of top garment before the exercise period. In addition, the results showed that based on clothing pressure, the feeling of comfort was different between before yoga and after resting. The appropriate choice of fabric material was important when constructing Bikram yoga clothing worn in hot conditions; however, level of clothing pressure was also found to be an essential design factor for comfort during rest after exercise.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.11
• /
• pp.1174-1185
• /
• 2012

This study develops tight-fitting upper clothing to measure electrocardiography (ECG) data. Taking into consideration the elasticity of the clothing, we made 4 experimental clothes by applying to each a weft reduction rate of 40%, 50%, 60%, and 70%. The 4 experimental clothes were used to measure resting ECG, exercise ECG, and post-exercise ECG for 4 men in their 20s. We compared clothing pressures using sensors on the human body and on a dressform. Subjective wear sensations of the 4 experimental clothes were evaluated using a subjective 7-point scale (with 7 being most excellent). We measured clothing pressures by using the air type pressure (AMI 3037-2) for upper and lower chest sensors in the developed tight-fitting upper clothing. The lower chest sensor showed that the clothing pressure on a human body and dressform changed consistently as the weft reduction rate decreased. The upper chest sensor showed inconsistent changes in clothing pressure as the weft reduction rate decreased. The wearing-test result for preliminary subjects showed that the lower chest sensor was more stable than the upper chest sensor; therefore, we inserted the sensor at the lower chest position before performing ECG. Except for Subject 4, the resting ECGs were stably measured for 3 subjects (Subject 1, Subject 2, and Subject 3) in all the developed clothes (A clothing, B clothing, C clothing, and D clothing). However, D clothing showed stable ECG values after exercise. The results of the experiment showed that we could measure ECG without difficulty using clothes with a weft reduction rate of 40% when the movement was not intense; however, tight-fitting upper clothing with a weft reduction rate of 70% was necessary to measure exercise ECG and post-exercise ECG values.

• Journal of the Korean Home Economics Association
• /
• v.24 no.1
• /
• pp.1-7
• /
• 1986

There is hardly any helpful data from the studies on the clothing pressure of men, because most studies about the clothing pressure have been attempted to analyze the case of women. This study, therefore, was done about the men's waist which was most highly pressured of the body. RESULTS: 1. The pressure from the waist when the man puts on summer wears was as follow ; the case when standing, the pressure from the abdomen was 28.99±14.37g/㎠, and the one from the side 34.14±14.79g/㎠, the case when sitting on the chair, the pressure from the abdomen was 31.27±15.59g/㎠, and the one from the side was 33.39±13.23g/㎠. 2. The pressure from the abdomen was increased in proportion to the Rohrer index. 3. The clothing pressure given the waist was lower in case of the men with digestive disorder than the ordinary ones.

• Fashion & Textile Research Journal
• /
• v.18 no.1
• /
• pp.80-90
• /
• 2016

This study presents quantitative evaluation standards for they mobility test, conducted in the process of a slacks fit test. This study quantified the subjects' evaluation on the wearability of slacks to provide objective qualitative evaluation methods for existing mobility tests. The subjects were women of standard bodytype between the ages of 18 and 24 wearing slacks designed to test their mobility based on differences in ease in waist girth, hip girth, crotch length and knee length. A qualitative evaluation tested the wearability of slacks. Clothing pressure and gap area between the body and slacks were measured based on a quantitative evaluation. The clothing pressure and the gap area between the body and slacks (which reflect the results of the wearability test) were presented in this study as quantitative evaluation standards. Clothing pressure tended to increase as the ease of slacks decreased; however, clothing pressure standards, that induce discomfort, differed by body parts. The hip, crotch, and knee area were relatively less sensitive despite the waist and the abdominal area sensitivity to clothing pressure. This study suggests the minimum ease for the appropriate wearing comfort of slacks by region and motion as standards for the quantitative evaluation of mobility tests. These was reset in accordance to the limits of clothing pressure when the minimum ease was considered as wearable but exceeded the clothing pressure limits.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.4
• /
• pp.55-66
• /
• 2015

The objective of this study is to propose a method by which movement fitness can be evaluated using a three-dimensional virtual garment simulation program. To this end, five types of jean pants for men were evaluated on the program by setting the avatars to make particular movements to examine the level of pressure on each body part. To verify whether the clothing pressure measurement produces valid and reliable results, virtual garment simulation program was utilized. The results indicated that there were significant differences in the levels of pressure on body parts depending on the type of test garment and motion. In addition, the clothing pressure measurement results were in line with the appearance evaluation results suggested by a previous study. Based on this set of results, the nomological validity of the clothing pressure measurement program used in this study was verified. Moreover, we employed an appearance evaluation along with the clothing pressure measurement to verify the reliability of the program; there was a high correlation between clothing pressure measurements and appearance evaluation measurements, indicating that measuring clothing pressures may well compensate for the limitations of appearance evaluation. We expect the results of this study to make valuable contributions in facilitating the digitalization of the fashion industry. Furthermore, this study also is significant in that it has suggested 3D virtual fitting programs as a solution to the long-criticized problem related to the evaluation of movement fitness in existing virtual garment simulation programs.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.4
• /
• pp.586-600
• /
• 2015

This study investigates clothing pressure and subjective sensations in brassieres depending on breast type or bra type. The results of this study show that clothing pressure and subjective sensations were significantly influenced by breast type. The flat type breast and drooping type breast have a lower subjective satisfaction. Satisfaction for 3/4WL is the largest; however, 1/2W having low preventing breast shake and no-wire bra having low bust-up or low arrange-breast are required enhancements in bra function. The results are useful to provide basic data and produce high-quality brassieres depending on breast type.