• 한국컴퓨터정보학회논문지
• /
• 제9권4호
• /
• pp.109-116
• /
• 2004

본 논문은 여러 옷감 조각들을 이용하여 가상의 3차원 인체 모델에 옷을 입히기 위한 의복 시뮬레이션 시스템을 제안한다. 본 논문에서 의복은 서로 꿰매지는 2차원 재단 패턴으로 구성된다. 제안된 시스템은 3차원 인체 모델 파일과 2차원 재단 패턴 파일을 읽어 들인 다음에 질량-스프링 모델에 기반한 물리적 시뮬레이션에 의해 의복을 착용한 3D모델을 생성한다. 본 논문의 시스템은 사실적인 시뮬레이션을 위하여 인체 모델을 구성하는 삼각형과 의복을 구성하는 삼각형 사이의 충돌을 검사하고 반응 처리를 수행하였다. 인체를 구성하는 삼각형의 수가 매우 많으므로, 이러한 충돌 검사 및 반응 처리는 많은 시간을 필요로 한다. 이 문제를 해결하기 위하여, 본 논문에서는 공간 분할 기법을 이용하여 충돌 검사 및 반응 처리 수를 줄이는 방법을 제안한다. 실험 결과에 의하면 본 논문의 시스템은 사실적인 영상을 생성할 수 있었고 수초 이내에 가상 인체 모델에 의복을 입힐 수 있었다.

• 헤리티지:역사와 과학
• /
• 제51권4호
• /
• pp.84-107
• /
• 2018

첨모직은 표면에 짧은 파일이 나타나는 것으로 조선시대 후기에는 첨모직 깔개를 지칭하는 용어로 채담이 사용되었으며, 20세기 초에는 융전과 단통, 양탄자 등으로 불리었다. 조선 말기 이후의 여러 문헌이나 신문기사, 그리고 각종 사진자료를 통해 첨모직 깔개가 왕실뿐만 아니라 일반인도 사용하였고 당시 국내에서 제작하였다는 것이 확인되었다. 본 연구에서는 조선 말기 이후의 첨모직 깔개 6점을 실물 조사하였는데 5점은 페르시아매듭의 컷파일이며 1점은 루프파일의 기법으로 제작되었다. 컷파일의 깔개는 크기가 가로 72~98 ${\times}$ 세로 150~156cm의 직사각형이며, 나비, 사슴, 호랑이, 그리고 십장생 등의 주 무늬를 중앙에 배치하고 卍자를 가장자리에 배치하였다. 컷파일의 소재는 지경사는 모두 면사이며 지위사는 3점은 면사, 1점은 모사, 그리고 1점은 면사와 비스코스레이온의 혼섬사이다. 지위사는 4점이 S꼬임의 실 여러 올을 합쳐 Z방향으로 합사한 실을 사용했다. 파일위사는 4~6가지의 색이 사용되었는데 홍색을 제외하고 모두 염색을 하지 않은 자연색 그대로의 모섬유가 사용되었다. 그리고 S나 Z꼬임의 모사를 2올 이상 합하여 반대방향으로 꼬임을 주었는데 굵기에 맞춰 올수를 합하였다. 깔개의 위아래 가장자리는 위사를 6올 이상 넣고 남은 지경사는 몇 올씩을 한데 묶어서 정리하였으며, 좌우 가장자리는 3올 이상의 면사를 가운데 놓고 수평으로 감아 마치 둥근 막대처럼 만들며, 가장자리에서 2~3번째 지경사를 징거서 튼튼하게 고정하였다. 루프파일은 경사방향으로 고리를 만든 경첨모직이며 지경사와 지위사는 면사, 파일경사는 모사로 추정된다. 소재의 성분 분석이 가능했던 깔개는 3점으로 파일위사는 판단이 불명한 것을 제외하고 염소와 비미종 양으로 판명되어 첨모직 깔개에 다양한 종류의 동물털이 사용되었을 가능성이 있다고 본다. 본 연구에서 조사한 6점의 깔개는 1800년대 말부터 1900년대 초에 제작되었다고 추정된다. 깔개의 정확한 제작지는 확인할 수 없었으나 당시 국내에서 첨모직 깔개를 제작하고 있다는 문헌기록과 깔개의 문양의 조형성을 고려한다면 우리나라에서 제작된 것으로 본다.

• 공업화학
• /
• 제27권4호
• /
• pp.421-426
• /
• 2016

본 연구에서는 폴리옥소메탈레이트(polyoxometalate, POM)가 도핑된 폴리피롤(polypyrrole, Ppy)을 3차원 구조의 탄소천(carbon cloth, CC) 표면 위에 전기화학적 증착법을 이용하여 합성하고 이의 의사커패시터 특성을 순환전압전류법과 정전류 충전-방전법을 사용하여 분석하였다. POM-Ppy의 코팅은 전기화학적 증착 시간에 따라서 얇은 conformal형태의 코팅으로 조절되었다. 제조된 POM-Ppy/CC의 재료 특성은 전자주사현미경과 X-선 분광분석을 사용하여 분석하였다. POM-Ppy/CC의 3차원 나노복합체 구조는 높은 비정전용량($561mF/cm^2$), 고속 충방전(85% 용량 유지율) 및 장수명 특성(97% 용량 유지율)을 나타내었다.

• 대한가정학회지
• /
• 제32권3호
• /
• pp.217-226
• /
• 1994

Cloth culture is one of the basic unit of constructing man's culture in a life of human being. One of the fundamental elements to construct cloth culture is the silk-fabric from the ancient time-Sam Han period B.C 2∼4 Korea. This study is to survey the growing aspects of the silk-fabric influence Goguryo & Bakje dynasty. It is an attempt to manifest that how silk-fabric influence through a trade or as means of currency between the two nations at that time. through a trade or as means of currency between the two nations at that time. To certify I use material such as San guo zhi, Hou Han han shu from China Samkuksaki Dong-kuk-tong-gam from Korea and NiHon Shoki from Japen and I concerned the cultural relations of politics economics and socity of the two dynastics so as to prove a relations of politics economics and socity of the two dynastics so as to prove a relative relation between the two. It is reached to the conclusion that silk fabric had been a constituent role at cloth culture at that time of Goguryo & Bakje. It is pointed out that silk-fabric had been an important role to construct the culture of social economic and politic through a trade and as a precious currency.

• 대한가정학회지
• /
• 제47권3호
• /
• pp.1-9
• /
• 2009

This study was conducted to examine how patchwork was expressed in fashion based on theoretical background on its brief history and expression styles and to show its possibility of creating ways for new expression in modern fashion. This study reviewed literatures on definition, history and styles of patchwork and investigated mainly works, which had been presented in collections home and abroad since 2000, to analyze its expressive characteristics shown in modern fashion. According to analysis on the expression of patchwork, it used various painting techniques such as patterns, colors and surface effect. It included patchwork having patterns provoking elusion of fairy tails; containing painting expression of reproducing works of artists; using colors boldly and contrasting strong primary colors directly to establish purity of painting and to pursuit characteristic expression; and using expression techniques of pure art such as gradation and cutting. Second, it used a compromise expression in materials, methods and substances. Patchwork which had used cloth without a pattern or printed fabric, utilized various materials like vinyl, paper, leather, metal and plastic and had a figurative value showing a solid expression as an objet itself with new techniques and changes of connecting methods. Thirdly, it used tradition patchwork techniques. Pieced patchwork, crazy patchwork and images of traditional odd ends of cloth covering a meal were applied to a whole area or a part of cloth to avoid monotony of design and to use it as a decoration.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2008년도 학술대회 1부
• /
• pp.475-480
• /
• 2008

본 논문에서는 카메라를 통하여 획득한 2D 인체 영상에 계측점(landmark)을 설정하여 인체 치수 측정과 치수 수정(editing)이 가능하며, 계측점과 가상의복 모델링 데이터를 이용하여 가상의복 시각화를 할 수 있는 맞춤양복 제작 시스템을 제안한다. 제안하는 시스템은 기존의 맞춤의복산업의 수동적인 방식이 아닌 디지털화와 자동화에 필요한 기술일 뿐만 아니라 의류산업의 다양한 콘텐츠에서 일반적으로 사용할 수 있을 것으로 예상된다.

• Environmental Engineering Research
• /
• 제19권4호
• /
• pp.363-367
• /
• 2014

One chambered sediment microbial fuel cell (SMFC) was equipped with Fe, brass (Cu/Zn), Fe/Zn, Cu, Cu/carbon cloth and graphite felt anode. Graphite felt was used as common cathode. The SMFC was membrane-less and mediator-less as well. Order of anodic performance on the basis of power density was Fe/Zn ($6.90Wm^{-2}$) > Fe ($6.03Wm^{-2}$) > Cu/carbon cloth ($2.13Wm^{-2}$) > Cu ($1.13Wm^{-2}$) > brass ($Cu/Zn=0.24Wm^{-2}$) > graphite felt ($0.10Wm^{-2}$). Fe/Zn composite anode have twisted 6.73% more power than Fe alone, Cu/carbon cloth boosted power production by 65%, and brass (Cu/Zn) produced 65% less power than Cu alone. Graphite felt have shown the lowest electricity generation because of its poor galvanic potential. The estuarine sediment served as supplier of oxidants or electron producing microbial flora, which evoked electrons via a complicated direct microbial electron transfer mechanism or making biofilm, respectively. Oxidation reduction was kept to be stationary over time except at the very initial period (mostly for sediment positioning) at anodes. Based on these findings, cost effective and efficient anodic material can be suggested for better SMFC configurations and stimulate towards practical value and application.

• 상하수도학회지
• /
• 제26권3호
• /
• pp.355-360
• /
• 2012

The characteristics of power generation were investigated by changing the electrical conductivity from 10 to 40mS/cm using air-cathode microbial fuel cell, which had graphite fiber fabric(GFF) anode. There were three kinds of cathode used: one was carbon cloth cathode coated with Pt, another was carbon nanotube(CNT) cathode with non-precious catalyst of Fe-Cu-Mn, and the other was carbon nanotube(CNT) cathode without any catalyst. When it was operated in batch mode, power density of 1369.5mW/$m^2$ was achieved at conductivity of 20mS/cm. Power density from MFC with CNT cathode coated with multi-catalyst of Fe-Cu-Mn was shown about 985.55mW/$m^2$, which was 75.1% compared the power density of carbon cloth coated with Pt. This meant that CNT cathode coated with multi-catalyst of Fe-Cu-Mn could be an alternative of carbon cloth cathode.

• 한국의류산업학회지
• /
• 제10권4호
• /
• pp.560-565
• /
• 2008

Plantae of the natural material has been broadly used on cloth dyeing by it's specific properties such as eco-friendly and innoxious. However dyeing with natural material on synthetic fiber is nearly impossible due to poor affinity between natural material and synthetic fiber. The method which is binding with micro-capsulized natural material to cloth, used in this study, has low change on quality by external influence. Also this method has high ability in spray effect by broken capsule which comes to pressure and friction when the treated cloth was dressed. And this method is applicable widely from natural fiber to synthetic fiber. The purpose of this study is to develop the multi-functional synthetic material with micro-capsulized Ginseng on PET. Moreover, it was driven by comparison of colormetric properties and fastness between regular dip-dyeing method and binding with micro-capsulized material method. Dyeability showed a little bit low exhaustion but the PET treated by micro-capsule was more or less better than the dip dyed PET. Through the SEM(Scanning Electron Microscope) of PET treated by micro-capsule, it has good residence of capsules even after 5 or 10 times washing. Wash and light fastness were revealed some different grades by each condition but showed high level, in most and the micro-capsulized PET was more improver than regular dip dyed PET.

• 한국의류학회지
• /
• 제25권1호
• /
• pp.50-60
• /
• 2001

This study is to clarify the concept of \"Americanization\" among korean modern clothing culture by investigating magazines from 1920s to 1930s. The Americanization of modern clothing culture can be divided to New fashion, Sports-wear, and Cloth improvement. 1. New fashion, Western culture was the main stream of new fashion, and modern boys and girls could bear cultural privileged consciousness. And the spread of modern culture was so fast that exaggerated fashional preference provoked extravagancy and loss of individuality. 2. Sports-wear. Under the rule of Japanese imperialism, initial sports activity was encouraged to regulate colony by principle and order. Through the sports-wear, practicality of clothing, exposure of female body, and the concept of T.P.O.(Time, place, occasion) were introduced. 3. Cloth improvement. The capitalism and modern concept of \"time\" were introduced and promoted maximum productivity. And to increase productivity, imperialist educated conveniency of western clothes and inconveniency of traditional Korean clothes. These could affect Koreans to think themselves a sense of inferiority(uncivilized complex).ncivilized complex).