• International Journal of Aeronautical and Space Sciences
• /
• 제9권2호
• /
• pp.1-8
• /
• 2008

This paper presents a real-time algorithm for collision detection, collision avoidance and guidance. Three-dimensional point-mass aircraft models are used. For collision detection, conflict probability is calculated by using the Monte-Carlo Simulation. Time at the closest point of approach(CPA) and distance at CPA are needed to determine the collision probability, being compared to certain threshold values. For collision avoidance, one of possible maneuver options is chosen to minimize the collision probability. For guidance to a designated way-point, proportional navigation guidance law is used. Two scenarios on encounter situation are studied to demonstrate the performance of proposed algorithm.

• 제어로봇시스템학회논문지
• /
• 제22권11호
• /
• pp.883-887
• /
• 2016

Navigating an unknown environment is a challenging task for a robot, especially when a large number of obstacles exist and the odometry lacks reliability. Pose tracking allows the robot to determine its location relative to its previous location. The ICP (iterative closest point) has been a powerful method for matching two point clouds and determining the transformation matrix between the maps. However, in a situation where odometry is not available and the robot moves far from its original location, the ICP fails to calculate the exact displacement. In this paper, we suggest a method that is able to match two different point clouds taken a long distance apart. Without using any odometry information, it only exploits the features of corner points containing information on the surroundings. The algorithm is fast enough to run in real time.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.83-88
• /
• 2006

Evaluation of collision risk plays a key role in developing the expert system of navigation and collision avoidance. This paper presents a new collision risk model formula that is one modification model on the basis of one approach to the evaluation of collision risk using sech function produced by Prof. Jeong in his relevant $articles^{[2][3][4][5]}$. And as a grope in collision risk evaluation field, this paper applied the new model in appraising the collision risk, suggested how to decide the safe range of own ship’'s action. Moreover this paper also analyzed theoretically how to determine the coefficients as describes in the new modification model formula, and suggested the appropriate values as applicable.

• 한국항해항만학회지
• /
• 제31권2호
• /
• pp.121-126
• /
• 2007

Evaluation of collision risk plays a key role in developing the expert system of navigation and collision avoidance. This paper presents a new collision risk model formula that is one modification model on the basis of one approach to the evaluation of collision risk using sech function produced in earlier studies. And as a tool of the evaluation field of ship collision, this paper applied the new model in appraising the collision risk and represented how to decide the safe range of own ship's action. Moreover this paper also analyzed theoretically how to determine the coefficients as described in the new modification model, and suggested the appropriate values as applicable.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2021년도 추계학술대회
• /
• pp.181-182
• /
• 2021

본 연구에서는 자율운항선박의 원격 관제 및 제어하는 과정에서 원격 운항자에게 사전 충돌 위험 정보를 제공하기 위해 선박자동식별시스템(AIS, Automatic Identification System)의 항적 정보를 토대로 자율운항선박의 운항 경로 상에 잠재된 충돌 위험 영역을 예측하기 위한 기초 연구를 수행하였다. 자율운항선박의 운항 경로 상에 근접한 타선의 AIS 정보에는 기본적으로 선박의 위치, 속도, 침로에 대한 정보가 반영되어 있으므로, 이러한 정보를 토대로 일정 시간 동안 운항 경로를 예측할 수 있다. 그리고 예측한 정보를 기반으로 대표적 충돌 위험 지수인 최근접점(CPA, Closest Point of Approach)과 최근접점 거리(DCPA, Distance to CPA) 정보를 활용하여 충돌 위험 영역을 2차원 공간상에서 예측하였다. 제안된 방법은 실제 AIS 항적 데이터를 활용한 수치 시뮬레이션을 수행하여 초기 결과를 검증하였다.

• 한국농촌건축학회논문집
• /
• 제17권1호
• /
• pp.73-81
• /
• 2015

The purpose of this study is to analyze the approach characteristics, relation to other facilities, and current status focusing on 28 total of exhibition-culture facilities in Gangneung. The results are following as. First, 19 facilities are located in urban area and nine are located in country side. With locational characteristics of Gangneung which is mountains in west and sea to east, three are located in high hill side and four are in sea shore among nine facilities. Facilities in urban area converge to Gungpodae and Ojukhuk which are symbol space in Gangneung. Those facilities started to have been increased from 1990s and rapidly increased from 2000s. The reason is that people have been interested in culture and art in society in general. In building structure, buildings related with traditional contents were constructed with wooden structure while buildings have been mainly constructed with modern ways such as steel and reinforced concrete structure. Second, the 28 facilities are classified into three types by function of other space or facilities within same a site or a building. The three types are themselves usage only, multi-function, and park type. The multi-function type is re-classified into two; public type and commercial type. Those functions have changed according to changes of society and times. Finally, for approaching to the exhibition-culture facilities with general transportation, the mean distance from the closest bus stop to those facilities each is 280m and 27 facilities are located within 670m from the closest bus stop. For approaching way using by car creates movement along road-building site-parking space-main entrance of building. When based on main entrance by the movement, parking space located in front side of main entrance is the largest, next is in the side, and the least is in back side. Various factors such as approaching form from road to parking space and space size between main entrance and parking space influence to approaching ways of exhibition-culture facilities in Gangneung.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권2호
• /
• pp.188-198
• /
• 2013

In constructing a collision avoidance system, it is important to determine the time for starting collision avoidance maneuver. Many researchers have attempted to formulate various indices by applying a range of techniques. Among these indices, collision risk obtained by combining Distance to the Closest Point of Approach (DCPA) and Time to the Closest Point of Approach (TCPA) information with fuzzy theory is mostly used. However, the collision risk has a limit, in that membership functions of DCPA and TCPA are empirically determined. In addition, the collision risk is not able to consider several critical collision conditions where the target ship fails to take appropriate actions. It is therefore necessary to design a new concept based on logical approaches. In this paper, a collision ratio is proposed, which is the expected ratio of unavoidable paths to total paths under suitably characterized operation conditions. Total paths are determined by considering categories such as action space and methodology of avoidance. The International Regulations for Preventing Collisions at Sea (1972) and collision avoidance rules (2001) are considered to solve the slower ship's dilemma. Different methods which are based on a constant speed model and simulated speed model are used to calculate the relative positions between own ship and target ship. In the simulated speed model, fuzzy control is applied to determination of command rudder angle. At various encounter situations, the time histories of the collision ratio based on the simulated speed model are compared with those based on the constant speed model.

• 한국음향학회지
• /
• 제21권5호
• /
• pp.446-454
• /
• 2002

본 연구는 이동 표적체에서 주파수가 서로 다른 신호가 서로 다른 위치에서 발생할 때 도플러 주파수 편이량을 추정하여 이들의 상대적인 신호 발생 위치를 추적하는 도플러 스캐닝 기법에 관한 연구이다. 예를 들어 선박의 발전기와 프로펠러 등과 같은 탑재 기계장치들의 진동에 의해 야기되는 기계적 소음의 각 특징 주파수들의 도플러 주파수 편이는 최단근접거리 (CPA: Closest Point of Approach)에 따라 유일한 시간 정보를 갖고 각 소음원들의 위치에 관련되는 함수이다. 따라서 도플러 스캐닝 기법을 적용하면 이동 선박의 각 기계적 소음원들간의 공간적인 상대 위치 추정이 가능하다. 그러나 일반적으로 기계류 소음의 주파수는 저주파수대역이므로 도플러 주파수 편이량을 추정하기 위해서는 주파수 분해능이 높아야 하고 아울러 탑재장치의 공간분해능을 높이기 위해서는 동시에 시간 분해능이 높아야 한다. 따라서 상호 역비례 관계에 있는 이들 분해능을 동시에 높이기 위해 확장 칼만 필터 알고리즘을 적용하여 특징 신호들의 도플러 주파수 편이량을 추정하여 기계류의 상대적인 탑재 위치를 규명할 수 있음을 보인다. 먼저 수치모의 실험으로 그 가능성을 검증하고 자동차에 탑재된 스피커 음원을 사용한 실험 결과를 통해 그 성능을 확인하도록 한다.

• 한국정보통신학회논문지
• /
• 제18권7호
• /
• pp.1518-1524
• /
• 2014

본 논문은 주변탐색(Surrounder Search: SuSe)이라는 새로운 공간질의 방법을 제안한다. 이 기법은 현재 사용자의 위치를 중심으로 주변에서 가까운 관심영역의 공간객체를 탐색하는 것이다. 사용자 중심의 주변탐색은 증강현실과 같이 사용자가 관심 있어 하는 공간객체 중 가까운 것을 찾기 때문에 기존의 공간질의와 구별된다. 기존 기법은 질의점과 객체 사이의 최단거리(MINDIST)를 기준으로 주변을 탐색하지만 제안 기법에서는 객체들 사이에 숨어있지만 관심의 대상인 숨은 객체를 식별하기 위해서 각도(Angle)를 함께 고려하여 탐색한다. 제안 기법의 특징은 기존기법이 거리만을 사용하여 가까운 객체를 탐색한 것과 달리 거리는 멀지만 숨은 객체까지도 찾아냄으로써 사용자의 선호도를 더 세밀하게 반영한다. 실험결과에서 제안기법인 SuSe는 최근접 이웃 탐색기법인 NN(Nearest Neighbor)과 비교하여 보다 정밀한 공간객체 탐색이 가능하며 향상된 탐색성능을 타나낸다.

• 대한디지털의료영상학회논문지
• /
• 제12권2호
• /
• pp.119-125
• /
• 2010

In order to demonstrate the value of long-distance radiography, we have studied how distance affects images in chest frontal radiography and compared short-distance and long-distance images in chest lateral radiography. Cardiothoracic ratio(CTR %) of 50 patients with no disease in the chest(10 each at the age of 20~60) were evaluated in Supine AP(100 cm), Sitting AP(100 cm), Sitting AP(180 cm), and Erect PA(180 cm). In lateral radiography, we evaluated and compared left lateral radiography(100 cm and 180 cm) of the patients based on the horizontal maximum of the heart. The average value of CTR(%) were 0.48 in Erect PA(180 cm), 0.52 in Supine AP(100 cm), 0.50 in Sitting AP(100 cm), 0.49 in Sitting AP(180 cm), which were Supine AP(100 cm) > Sitting AP(100 cm) > Sitting AP(180 cm) > Erect PA(180 cm). The average value of Maximum transverse diameter of left of the cardiac(MLD), which showed how much axis of spine was slanted to the left, was 90.67 mm in Erect PA(180 cm), 103.92 mm in Supine AP(100 cm), 93.54 mm in Sitting(100 cm), 89.84 mm in Sitting AP(180 cm), 58.11 mm in the minimum value and 118.79 mm in the maximum value. The average value of Maximum transverse diameter of right side of the cardiac(MRD), which suggested how much axis of spine was slanted to the right, was 47.18 mm in Erect PA(180 cm), 48.12 mm in Supine AP(100 cm), 44.98 mm in Sitting AP(180 cm), and the minimum value 26.84 mm and the maximum value 65.30 mm. There was no standard method to calculate; therefore, the horizontal maximum of the heart was used for lateral radiography. The average value was 121.07 mm in 100 cm and 109.76 mm in 180 cm. Sitting AP(180 cm) among the types was closest to C-PA(180 cm). As a result, during C-AP radiography, long-distance radiography lessened shadow of the heart more than that of short distance, Sitting position more than Supine position.