• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.1174-1176
• /
• 1997

In this paper, the power system stabilizer(PSS) using the sliding mode observer-model following(SMO-MF) including closed-loop feedback(CLF) for single machine system is extended to multimachine system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.48.5-48
• /
• 2001

The resulting stabilizing controller in this paper consists of the disturbance estimator and the gain scheduled controller. The disturbance estimator tracks the unknown external disturbance and its derivative information in the closed-loop control system using fuzzy logic based adaptation law. Moreover, the gains of the stabilizing controller are appropriately scheduled according to the estimated values. Furthermore, since the estimation law is combined with the stabilizing controller in the closed control loop, it asymptotically minimizes the estimation error. In order to conrm the usefulness of the proposed control scheme, it is applied to the magnetic suspension systems.

• 대한전자공학회논문지
• /
• 제24권2호
• /
• pp.215-222
• /
• 1987

This paper generalizes the previous results of the closed-loop eigenstructure assignment via output feedback in linear multivariable systems. Necessary and sufficient conditions for the closed-loop eigenstructure assignment by output feedback are presented. Some known results on entire eigenstructure assignment are deduced from this results.

• 전력전자학회논문지
• /
• 제16권1호
• /
• pp.38-43
• /
• 2011

본 논문에서는 슬라이딩 모드 관측기를 이용하여 IPMSM(Interior Permanent Magnet Synchronous Motor)의 센서리스 제어의 기동특성에 관한 연구를 수행하였다. 역기전력을 추정하는 센서리스 제어 방식은 초기 구동 시 회전자의 위치를 알 수가 없으므로 Open-Loop알고리즘을 이용하여 강제로 모터를 구동시킨다. 이 방법은 Open-Loop에서 Closed-Loop로 제어되는 시점에 부하의 상태에 따라 기동 특성이 변하는 문제점이 발생 할 수 있다. 본 논문에서는 부하에 따라 기동 특성에서 야기되는 문제점을 검토하고 그 해결책을 제시한다. 제시된 방법은 6극 600W급 IPMSM을 이용하여 시뮬레이션과 실험을 통해 검증한다.

• Environmental Engineering Research
• /
• 제14권3호
• /
• pp.164-169
• /
• 2009

A powder form of aluminum (hydr)oxides is not suitable in wastewater treatment/filtration systems because of low hydraulic conductivity and large sludge production. In this study, aluminum (hydr)oxide-coated sand (AOCS) was used to remove phosphate from aqueous solution. The properties of AOCS were analyzed using a scanning electron microscopy (SEM) combined with an energy dispersive X-ray spectrometer (EDS) and an X-ray diffractometer (XRD). Kinetic batch, equilibrium batch, and closed-loop column experiments were performed to examine the adsorption of phosphate to AOCS. The XRD pattern indicated that the powder form of aluminum (hydr)oxides coated on AOCS was similar to a low crystalline boehmite. Kinetic batch experiments demonstrated that P adsorption to AOCS reached equilibrium after 24 h of reaction time. The kinetic sorption data were described well by the pseudo second-order kinetic sorption model, which determined the amount of P adsorbed at equilibrium ($q_e$ = 0.118 mg/g) and the pseudo second-order velocity constant (k = 0.0036 g/mg/h) at initial P concentration of 25 mg/L. The equilibrium batch data were fitted well to the Freundlich isotherm model, which quantified the distribution coefficient ($K_F$ = 0.083 L/g), and the Freundlich constant (1/n = 0.339). The closed-loop column experiments showed that the phosphate removal percent decreased from 89.1 to 41.9% with increasing initial pH from 4.82 to 9.53. The adsorption capacity determined from the closed-loop experiment was 0.239 mg/g at initial pH 7.0, which is about two times greater than that ($q_e$ = 0.118 mg/g) from the kinetic batch experiment at the same condition.

• Progress in Superconductivity
• /
• 제7권2호
• /
• pp.167-173
• /
• 2006

Coated conductors suitable for the fabrication of persistent mode high $T_c$ magnets are suggested and the fabrication method of persistent mode magnets using coated conductor are demonstrated. Persistent current was observed in a small piece of coated conductor. Closed loop of coated conductor with a diameter of around 1 em was successfully prepared and was cooled with a magnetic field of about 500 Gauss in order to induce supercurrent. Coated conductor with a $I_c$ of 100 A/cm-width was used for the preparation of closed loop of coated conductor. Persistent current was confirmed by measuring the magnetic field generated from closed loop of coated conductor by using Gauss meter. Magnetic field of 4.4 Gauss was detected from the supercurrent of closed loop of coated conductor. It shows that superconducting joint of coated conductor is not a prerequisite for the construction of persistent mode magnets. It is thought that this work opens the possibility to use coated conductor for the construction of persistent mode high $T_c$ magnets for MRI, NMR and magnetic separation applications.

• 한국산업정보학회논문지
• /
• 제21권4호
• /
• pp.31-41
• /
• 2016

본 연구는 폐쇄루프 공급망 모델(Closed-Loop Supply Chain Model)을 이용하여 새로운 형태의 혼합형유전알고리즘(Proposed Hybrid Genetic Algorithm: pro-HGA)접근법의 수행도를 평가하기 위한 논문이다. 제안한 폐쇄루프 공급망 모델은 물류네트워크에서 순방향물류(Forward Logistics)와 역물류(Reverse Logistics)를 함께 고려한 통합형 물류모델이며. 이 모델에서는 회수된 제품의 재사용(Reuse), 재판매(Resale) 및 폐기(Waste Disposal)를 함께 고려하고 있다. 제안된 모델의 이행을 위해 기존연구에서 제안한 유전알고리즘(Genetic Algorithm: GA), 혼합형유전알고리즘(Hybrid Genetic Algorithm: HGA)과 본 연구에서 제안한 pro-HGA를 함께 적용하여 각 접근법들의 우수성을 비교분석하였다. 분석결과 본 연구에서 제안한 pro-HGA가 기존의 GA, HGA보다 더 우수한 결과를 얻었다.

• Journal of Electrical Engineering and Technology
• /
• 제5권1호
• /
• pp.116-128
• /
• 2010

Modeling of the three phase electric arc furnace and its voltage flicker mitigation are the purposes of this paper. For modeling of the electric arc furnace, at first, the arc is modeled by using current-voltage characteristic of a real arc. Then, the arc random characteristic has been taken into account by modulating the ac voltage via a band limited white noise. The electric arc furnace compensation with static VAr compensator, Thyristor Controlled Reactor combined with a Fixed Capacitor bank (TCR/FC), is discussed for closed loop control of the compensator. Instantaneous flicker sensation curves, before and after accomplishing compensation, are measured based on IEC standard. A new method for controlling TCR/FC compensator is proposed. This method is based on applying a predictive approach with closed loop control of the TCR/FC. In this method, by using the previous samples of the load reactive power, the future values of the load reactive power are predicted in order to consider the time delay in the compensator control. Also, in closed loop control, two different approaches are considered. The former is based on voltage regulation at the point of common coupling (PCC) and the later is based on enhancement of power factor at PCC. Finally, in order to show the effectiveness of the proposed methodology, the simulation results are provided.

• Journal of Information Processing Systems
• /
• 제15권3호
• /
• pp.593-603
• /
• 2019

In wearable healthcare systems, sensor devices can be deployed in places around the human body such as the stomach, back, arms, and legs. The sensors use tiny batteries, which have limited resources, and old sensor batteries must be replaced with new batteries. It is difficult to deploy sensor devices directly into the human body. Therefore, instead of replacing sensor batteries, increasing the lifetime of sensor devices is more efficient. A transmission power control (TPC) algorithm is a representative technique to increase the lifetime of sensor devices. Sensor devices using a TPC algorithm control their transmission power level (TPL) to reduce battery energy consumption. The TPC algorithm operates on a closed-loop mechanism that consists of two parts, such as sensor and sink devices. Most previous research considered only the sink part of devices in the closed-loop. If we consider both the sensor and sink parts of a closed-loop mechanism, sensor devices reduce energy consumption more than previous systems that only consider the sensor part. In this paper, we propose a new approach to consider both the sensor and sink as part of a closed-loop mechanism for efficient energy management of sensor devices. Our proposed approach judges the current channel condition based on the values of various body sensors. If the current channel is not optimal, sensor devices maintain their current TPL without communication to save the sensor's batteries. Otherwise, they find an optimal TPL. To compare performance with other TPC algorithms, we implemented a TPC algorithm and embedded it into sensor devices. Our experimental results show that our new algorithm is better than other TPC algorithms, such as linear, binary, hybrid, and ATPC.

• 융합정보논문지
• /
• 제9권8호
• /
• pp.45-52
• /
• 2019

본 논문에서는 다양한 실시간 이더넷 프로토콜에 쉽게 적용할 수 있는 폐루프 스테핑 모터 드라이브를 개발하는 방법을 제안한다. 제안 방법은 다양한 유형의 실시간 이더넷 프로토콜에 공용으로 재사용할 수 있는 모터 드라이브 모듈과 각 실시간 이더넷 프로토콜마다 개발되는 통신 인터페이스 모듈로 나누어진다. 또한 계층적 구조를 사용하여 모션 제어알고리즘을 다양한 실시간 이더넷 프로토콜과 모션 프로파일에 독립적으로 재사용할 수 있도록 하였다. 제안하는 방법을 검증하기 위해 EtherCAT 및 Mechatrolink III를 활용하여 폐루프 모터 드라이브를 개발하였으며, 실시간 이더넷 기반에서 정상적으로 제어되는 것을 확인하였다. 개발한 EtherCAT 및 Mechatrolink III의 실시간 통신 성능을 확인하기 위해 Cycle time을 측정하였으며, 그 결과 32개의 모터 드라이브를 연결한 경우 EtherCAT이 Mechatrolink III 보다 7.5배 정도 더 빠른 것을 확인하였다.