• 한국지역지리학회지
• /
• 제3권2호
• /
• pp.151-162
• /
• 1997

본 연구는 전통적인 농업입지론에 기초한 생산지향 모델에서 시장원리를 고려하여 토지이용에서 변화와 농작물 가격의 변화를 고찰하기 위한 이론 연구이다. 본 연구에서 제시된 균형모델은 생산비용, 운송률, 수요의 측면에서 생산지향모델과 비교된다. 시장(도시)의 규모가 농업토지이용에 미치는 영향을 시나리오를 통해 분석하였다. 또한 제시된 균형모델이 농업에서 불확실성이란 요소를 그 모델에서 어떻게 수용하는가를 제시하였다.

• 한국산학기술학회논문지
• /
• 제21권11호
• /
• pp.349-356
• /
• 2020

ISO 9705 룸코너 시험을 통해 복합소재 고체 가연물의 화재발생시 발생되는 열방출률을 측정하고 화재성장율을 계산하여 Fire Dynamics Simulator (FDS)에서 제공하는 열방출률 예측 모델을 사용자가 시험을 통해 얻어진 질량 소모율을 직접 입력하고 점화원에 의해 가연물의 표면 온도가 점화 온도에 도달하게 되면 정해진 연료를 소모하게 됨으로써 열방출률이 계산되는 단순 모델 (Simple model)과 질량 소모율을 직접 계산하는 방식으로 고체 가연물의 온도를 계산하고 고체 가연물의 열분해율을 조절하여 직접 열방출률을 계산하는 열분해 모델 (Pyrolysis model)로 구분하고 각각의 열방출률 모델에 필요한 입력 인자를 적용하여 동일한 조건에서 밀폐된 구획 환경에 따라 FDS 전산 해석을 수행하였다. 복합소재 고체 가연물로는 PU 폼과 PP, 철재로 대부분 구성되어있는 영화관 의자를 선정하였다. 동일한 조건에서 밀폐된 구획 환경에 따라 각각의 열방출률 예측 모델을 해석한 결과, 밀폐된 구획에서 단순 모델을 통해 예측된 열방출률과 화재성장율이 열분해 모델을 이용하는 경우에 비해 다소 과예측되는 것을 확인 할 수 있었다.

• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.54-61
• /
• 2004

The engine-out flow is highly transient and hot, and may place tremendous thermal and inertial loads on a closed-coupled catalyst. Therefore, time-dependent and detailed flow and thermal field simulation may be crucial. The aim of this study is to develop combined chemical reaction and multi-dimensional fluid dynamic mathematical model and to study the effect of unsteady pulsating thermal and flow characteristics on thermal reliability of closed-coupled catalyst. The effect of cell density on the conversion performance under real running condition is also investigated. Unlike previous studies, the present study focuses on coupling between the problems of pulsating flow pattern and catalyst thermal response and conversion efficiency. The results are expressed in terms of temporal evolution of flow, pollutant and temperature distribution as well as transient characteristics of conversion efficiency. Fundamental understanding of the flow and thermal phenomena of closed-coupled catalyst under real running condition is presented. It is shown that instants of significantly low values of flow uniformity and conversion efficiency exist during exhaust blowdown and the temporal varaition of flow uniformity is very similar in pattern to one of conversion efficiency. It is also found that the location of hot spot in monolith is directly affected by transient flow pattern in closed-coupled catalyst.

• 산업공학
• /
• 제22권2호
• /
• pp.153-164
• /
• 2009

An effective management for reverse flows of products such as reuse, repair and disposal, has become an important issue for every aspect of business. In this paper, we study the Location-Routing Problem (LRP) in the multi-stage closed-loop supply chain network. The closed-loop supply chain in this study integrated both forward and reverse flows. In forward flow, a factory, Distribution Center (DC) and retailer are considered as usual. Additionally in reverse flow, we consider the Central Returns collection Center (CRC) and disposal facility. We propose a mixed integer programming model for the design of closed-loop supply chain integrating both forward and reverse flows. Since the LRP belongs to an NP-hard problem, we suggest a heuristic algorithm based on genetic algorithm. For some test problems, we found the optimal locations and routes by changing the numbers of retailers and facility candidates. Furthermore, we compare the efficiencies between open-loop and closed-loop supply chain networks. The results show that the closed-loop design is better than the open one in respect to the total routing distance and cost. This phenomenon enlarges the cut down effect on cost as an experimental space become larger.

• Journal of the Korean Data and Information Science Society
• /
• 제7권1호
• /
• pp.79-85
• /
• 1996

This paper will show that the rank of the model matrix of a closed, n compartmental model with k sinks is n-k. This statement will be extended to include open compartmental models as a part of theorem.

• 한국음향학회지
• /
• 제25권7호
• /
• pp.319-324
• /
• 2006

본 논문에서는 화자독립 가변어휘 핵심어 검출기의 성능을 개선하기 위하여 두 가지의 새로운 비핵심어 모델링 방법을 제안한다. 첫째는 K-means 알고리즘 기반 monophone 군집화 방법을 개선하기 위해 monophone을 state단위로 결정트리를 기반으로 군집화하여 비핵심어를 모델링하는 방법이다. 둘째는 single state multiple mixture 방법을 개선하기 위해 음절단위 multi-state multiple mixture 방법으로 모델링하는 방법이다. 실험에서 ETRI 표준 한국어 공통음성 단어 DB를 이용하여 트라이폰 모델을 훈련하였고, 훈련에 사용하지 않은 음성데이터를 이용하여 핵심어 검출closed 테스트를 수행하였다. 그리고 사무실 환경에서 4명의 화자가 각각 100문장씩 발성한 400문장의 음성데이터를 이용하여 100단어 핵심어 검출 open 테스트를 수행하였다. 실험 결과 결정트리기반 상태 군집화 방법이 기존의 K-means 알고리듬 기반 monophone clustering 방법보다 핵심어 검출 성능이 28%/29%(closed/open test) 향상되었다 그리고 음절단위 multi-state multiple mixture 방법이 비핵심어 전체를 single state 모델로 구성하는 방법보다 핵심어 검출 성능이 22%/2%(closed/open test) 향상됨으로써 본 논문에서 제안한 두 가지 알고리듬이 우수한 결과를 나타내었다

• 전기학회논문지
• /
• 제57권6호
• /
• pp.1048-1057
• /
• 2008

This paper represents a design method for PID or low-order controllers cascaded with a linear plant in the unit feedback system where it is required to meet the given time response specifications such as overshoot and settling time. This problem is difficult to solve because the zeros of the controller appear in the numerator of the overall system and thus those zeros may make the time response design difficult. In this paper, we propose a new approach based on the partial model matching and the so called K-polynomial. The partial matching problem is formulated to an optimization problem in which a quadratic function of coefficient errors between a target model and the resulting closed loop system is minimized. For the sake of satisfying the closed loop stability, a set of quadratic constraints associated with the cost function is introduced. As a result, the controller designed meets both time response requirements and the closed loop stability, if any. It is shown through several examples that the present method can be easily applied to these problems.

• 전자공학회논문지S
• /
• 제35S권11호
• /
• pp.53-67
• /
• 1998

본 논문은 TSK퍼지모델로부터 폐루프의 안정성을 보장하며 그 응답을 자유로이 지정할 수 있는 퍼지제어기와 그 제어기의 설계 방법을 제안한다. 본 논문에서는 퍼지규칙의 선형식이 상수항이 포함되는 affine 방정식으로 된 일반적인 형태의 TSK퍼지모델을 다룬다. 본 논문에서는 제안되는 TSK퍼지제어기는, 선형시스템에서 사용되는 극배치(pole placement)법을 사용하여 설계될 수 있으며, 폐루프의 응답이 원하는 안정된 선형시스템의 거동과 동일하게 되도록 하며, 제어 목표를 바꿀 수 있도록 하며, 적분제어도 가능하게 한다. 시뮬레이션을 통해 퍼지제어기가 유효함을 보인다. 본 논문에서는 연속시스템과 이산시스템 모두에 대해 설명한다.

• Transactions on Electrical and Electronic Materials
• /
• 제18권2호
• /
• pp.103-110
• /
• 2017

The number of applications of solar photovoltaic (PV) systems in power generation grids has increased in the last decade because of their ability to generate efficient and reliable power in a variety of low installation in domestic applications. Various PV converter topologies have therefore emerged, among which the modular multilevel converter (MMC) is very attractive due to its modularity and transformerless features. The modeling and control of the MMC has become an interesting issue due to the extremely large expansion of PV power plants at the residential scale and due to the power quality requirement of this application. This paper proposes a novel control method of MMC which is used to directly integrate the photovoltaic arrays with the power grid. Traditionally, a closed loop control has been used, although circulating current control and capacitors voltage balancing in each individual leg have remained unsolved problem. In this paper, the integration of model predictive control (MPC) and traditional closed loop control is proposed to control the MMC structure in a PV grid tied mode. Simulation results demonstrate the efficiency and effectiveness of the proposed control model.

• 제어로봇시스템학회논문지
• /
• 제4권2호
• /
• pp.203-208
• /
• 1998

This paper presents an adaptive fuzzy controller using an neural network and adaptation algorithm. Reference-model following neuro-fuzzy controller(RMFNFC) is invesgated in order to overcome the difficulty of rule selecting and defects of the membership function in the general fuzzy logic controller(FLC). RMFNFC is developed to tune various parameter of the fuzzy controller which is used for the discrete nonlinear system control. RMFNFC is trained with the identification information and control closed loop error. A closed loop error is used for design criteria of a fuzzy controller which characterizes and quantize the control performance required in the overall control system. A control system is trained up the controller with the variation of the system obtained from the identifier and closed loop error. Numerical examples are presented to control of the discrete nonlinear system. Simulation results show the effectiveness of the proposed controller.