• Journal of the Korean Wood Science and Technology
• /
• v.24 no.1
• /
• pp.48-53
• /
• 1996

Brown rot fungus, Tyromyces palustris, has been reported to cause the loss of strength accelerated by oxalate, a non-enzymatic low molecular weight acid, with minute weight loss of decaying wood in early stage. The production of oxalate in relation to wood decaying and the presence of oxaloacetase. an oxalate producing enzyme, were identified during the process. Tyromyces palustris produced the largest amount of oxalate among brown rot fungi. In order to find out the cleavage of pulp fiber, we submerged pulp fiber in oxalate solution and the results showed that the number of short pulp fiber was highly increased, compared with control solution. The pH of decaying wood was decreased to 1.77 which was close to that of saturated oxalate solution, pH 1.2, Thus, the oxalate was thought to be accumulated in the decaying wood, The oxaloacetase which accelerates production of oxalate was derived from fungus, and the production of oxalate by the enzyme was determined by using on UV/Vis spectrophotometer. Therefore, the oxalate was found to be produced by oxaloacetase during decay. The oxalate may cause the acid-hydrolysis of cellulose and hemicellulose. The oxalate was thought to reduce the degree of polymerization and increase the enzyme activity, which resulted in rapid loss of strength in early stage-an identical feature of brown rot fungus.

• Textile Coloration and Finishing
• /
• v.34 no.3
• /
• pp.197-206
• /
• 2022

The purpose of this study was to confirm the optimal spinning conditions for PLA (Polylactic acid) as a fiber forming polymer. According to the melt spinning test results of PLA, the optimal spinning temperature was 258℃. However, it needs to note that relatively high pack pressure was required for spinning at 258℃. At an elevated temperature, 262℃, mono filament was broken easily due to hydrolysis of PLA at a higher temperature. In case of fiber strength, it was confirmed that the draw ratios of 2.7 to 3.3 were optimal for maximum strength of melt spun PLA. Above the draw ratio, 3.3, the strength of the PLA fibers was lowered. It was presumed that cleavage of the PLA polymer chain over maximum elongation. The heat setting temperature of GR (Godet roller) showed that the maximum strength of the PLA fibers was revealed around 100℃. The degree of crystallinity and the strength of the PLA fibers were decreased above 100℃. The optimal take-up speed (Spinning speed) was around 4,000m/min. Thermal analysis of PLA showed 170℃ and 57℃ as Tm (melting temperature) and Tg (glass transition temperature), respectively.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.1
• /
• pp.146-152
• /
• 2010

Recently, the applied frequency of composite materials was increased from the viewpoint of lightweight, high strength and low cost when a leisure boat and a fishing boatwere built. However, studies on the mechanical properties of composite material with ship are rare. Specially, a leisure boat and fishing boat with FRP had been built by hand lay-up method. However, the vacuum infusion method is rising recently for ship building. The manufactured these FRP plates were combined by using the adhesive. Therefore, in this study Cleavage peel strength, Shear strength and fatigue limit of adhesive bonds by tensileloading were estimated. From test results, the strengths of FRP specimens made by the vacuum infusion method are higher than that of the hand lay-up method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.7
• /
• pp.962-971
• /
• 2013

We compared the effectiveness of amidase (amano acylase, AA) and an endopeptidase, (trypsin, TR) in modifying the hydrophobicity of polyamide fabric. We evaluated the number of amino groups released into the reaction mixture in order to optimize the treatment conditions. We found that a large number of amino groups were released into the reaction mixture due to the cleavage of amide bonds by AA hydrolysis; however, the TR hydrolysis exhibited a relatively lower activity compared to AA hydrolysis. In AA and TR hydrolysis, significant differences were observed in the K/S values and moisture regain. Amide bonds in polyamide fabric were hydrolyzed by AA hydrolysis effectively. Compared to TR, AA formed more hydrolysis product (amino groups) on the fabric surface. Thus, the hydrophobicity of polyamide fabric was modified using AA hydrolysis (as verified by the wettability test) without any deterioration of fiber strength.

• Textile Coloration and Finishing
• /
• v.1 no.1
• /
• pp.1-6
• /
• 1989

The reaction of silk with a disulfide-containing crosslinking agent, i.e. bis($\beta$-isocyanatoethyl)disulfide(BIED), was studied in an attempt to obtain disulfide-crosslinked silk. The setting properties of disulfide-crosslinked silk fibers were studied. The permanent set values of single fibers were evaluated after the set fibers were relaxed in boiling water. When single fibers were set in boiling water or in boiling alkaline solution, the permanent set values of BIED-treated silk fibers were less than those of untreated silk fibers. When the fibers were treated with 2% thioglycolic acid solution at $60^\circ{C}$ followed by oxidation, settability of BIED-treated silk was better than that of untreated silk. The rearrangement of secondary bonds faciliated by cleavage of crosslinks as well as the rearrangement of crosslinks itself seems to be an important role in the set stability.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.4
• /
• pp.333-341
• /
• 2015

As results of X-ray diffraction analysis, samples of asbestos and soil were composed maily of dolomite ($CaMg(Co_3)_2$, tremolite ($Ca_2Mg_5Si_{18}O_{22}(OH)_2$), actinolite ($Ca(Mg,\;Fe)_6Si_8O_{22}(OH)_2$), talc ($Mg_3Si_4O_{10}(OH)_2$), calcite ($CaCO_3$) and small amounts of quartz ($SiO_2$) and clay minerals. The average size of asbestos fibers was about $100{\mu}m$ and maximum of some asbestos was $250.0{\mu}m$ in length. The aspect ratio of asbestos fiber were over 3 : 1 and inclined extinction in the range of $8.0-19.5^{\circ}$. Single isolated fragments of asbestos are probably fiber and acicula form in crystal edge along the cleavage plane. Tremolite that composed main asbestos mineral in rock and soil around Dong-a mine is higher content of Fe than actinolite asbestos.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.1
• /
• pp.1-7
• /
• 2007

As fiber reinforced composite materials are widely used in aircraft, space structures and robot arms, the study on non-destructive testing methods has become an important research area for improving their reliability and safety. AE (acoustic emission) can evaluate the defects by detecting the emitting strain energy when elastic waves are generated by the initiation and growth of crack, plastic deformation, fiber breakage, matrix cleavage, or delamination. In the paper, AE signals generated under uniaxial tension were measured and analyzed using the $8{\times}8$ matrix piezo electric sensor. The electronic circuit to control the transmitting distance of AE signals was designed and constructed. The optical data storage system was also designed to store the AE signal of 64channels using LED (light emitting diode) elements. From the tests, it was shown that the source location and propagation path of AE signals in composite materials could be detected effectively by the $8{\times}8$ matrix piezo electric sensor.

• Fibers and Polymers
• /
• v.2 no.2
• /
• pp.92-97
• /
• 2001

New film forming aromatic poly(amide-imide)s containing isoindoloquinazolinedione (IQ) unit in the backbone chain (polymer XIV) have been successfully synthesized by preparing prepolymers of poly(amic acid-carbonamide). followed by subsequent thermal cyclization of the prepolymers. 4,4-Diamino-3-carbamoylbenzanilide (DACB) V has been synthesized by reduction of 3-carbamoyl-4-amino-4-nitrobenzanilide IV. The prepolymers of poly(amic-acid-carbonamide) (polymers VII and VIII) which exhibit viscosities ranging from 1.4 to 1.7 dl/g have been prepared by a condensation polymerization of monomers such as BPDA, ODA, and DACB. Polymer XIV has been obtained by thermal cyclization of the polymers VII and VIII. During the thermal cyclization reaction, imide ring structure was first introduced and then transformed to the structure of IQ unit. The thermal degradation rate of the resultant polymers were influenced by the cleavage of amide bond but the final char yield was comparable to that of poly(BPDA-ODA).

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.148-152
• /
• 2000

The aluminum alloy 6061-T6 has been successfully used in structural applications especially the pressure vessel of the Advanced Neutron Source research reactor. And aluminum alloys, including 6061-T6, have a face-centered-cubic crystals structure. Under normal circumstances face-centered-cubic crystal structures do not exhibit cleavage fractures even at very lo9w temperatures. In aluminum-based structures, plates frequently find use as connecting links. Mechanical fasteners are often utilized in instances where ease of application, familiarity with fabrication processes, and severe dynamic loading are of concern. Plates frequently find use as connecting elements in structures built from aluminum alloys. Many structural elements employ mechanical fasteners. Twenty and twenty aluminum alloy 6061-T6 plates, representing four different bolt patterns, were mechanically deformed. And variable materials such as A1 6061-T6, Al 2024-T3, Carbon/Epoxy, Glass/Epoxy Composite and Woven fiber composite, are used as patch materials. From this experiment, it has been shown that the strength of patch-repaired specimens is different with the patch materials.

• Composites Research
• /
• v.24 no.3
• /
• pp.25-30
• /
• 2011

The studies on the non-destructive testing methods of the composite materials are very important for improving their reliability and safety. AE(Acoustic Emission) can evaluate the defects by detecting the emitting strain energy when elastic waves are generated by the generation and growth of a crack, plastic deformation, fiber breakage, matrix cleavage or delamination. In this paper, the AE signals of the filament wound composite cylinder and sandwich cylinder during the pressure test were measured and analyzed. The signal characteristics of PVDF sensors were measured, and an AE signal analyzer which had the band-pass filter and L-C resonance filter were designed and fabricated. Also, the crack detection capability of the fabricated AE signal analyzer wes evaluated during the pressure tests of the filament wound composite cylinder and the sandwich cylinder.