• 한국컴퓨터정보학회논문지
• /
• 제24권5호
• /
• pp.93-102
• /
• 2019

The nation's fraternity and elite players who have built up a global bicycle infrastructure often find it to be a problem with the bicycle's speed and speed reduction, pain in knees and hip joints, or even with the bike itself, or with the bike's own physical defects or a riding posture. However, we found that most cases of cleat adjustment errors were likely to be true. Accurate adjustment of the cleats is the most important of the entire fitting process and can be the basis for improving the ability of the bicycle rider and preventing injury. Therefore, the study was intended to give a prior study of bicycle fitting, which can improve bicycle efficiency and prevent injury when riding bicycle, and specific ways of adjusting bicycle shoe cleats, and the following results were obtained. First, the cleat characteristics of Shimano, LOOK and Speedplay, which are currently used in public, and the characteristics during the cleat adjustment process, were derived. In addition, the structure and characteristics of dedicated shoes using cleats and the method of using pedalling by the structure of shoes after adjusting the cleats were derived. Second, the position of the shoe and its relationship with torque in pedalling was discussed, and the method of adjusting front and back of cleats was derived. Third, leg length, ASIS, Q-Angle and Q-factor etc. were analyzed and the method of setting and adjusting cleat left and right values were derived. Fourth, the relationship between walking angle and cleat rotation was analyzed, the method was derived, and the torque size and angle behind the cleat adjustment were compared and analyzed using the spinner to indicate the torque and the effective mean torque angle after the cleat adjustment.

• 한국운동역학회지
• /
• 제19권2호
• /
• pp.369-377
• /
• 2009

The purpose of this study was to determine the relationship between different soccer cleat designs and knee joint moments. Twelve physically active males (mean(SD): age: 26.4(6.2)yrs; height: 176.4(4.1)cm; mass: 74.0 (7.4)kg) were recruited Kinematic and force plate data were collected for all subjects during normal running and a $45^{\circ}$ cutting maneuver, called a v-cut. Both motions were performed at $4.0{\pm}0.2\;m/s$ on infilled artificial turf with three pairs of soccer cleats of different sole plate designs, and one pair of neutral running shoes. Inverse dynamics were used to calculate three dimensional knee joint moments, with repeated measures ANOVA and post hoc paired Student's t-test used to determine significance between shoe conditions. Significant differences were found in the extension moments of the knee for running trials, and for external rotation and adduction moments in the v-cutting trials. Knee moments were greater in v-cut than running, and the traditional soccer cleats (Copa Mondial and World Cup) tended to result in greater knee moments than the Nova runner or TRX soccer cleat. Cleat design was found to influence 3-dimensional knee moments in a v-cut maneuver. In the translational traction test, there were significant differences between all conditions. In the rotational traction test, friction with soccer shoes were greater than friction with running shoes. However, no differences were found between soccer shoes. Higher moments may lead to increased loads and stresses on knee joint structures, and thus, greater injury rates.

• Structural Engineering and Mechanics
• /
• 제6권5호
• /
• pp.571-582
• /
• 1998

Testing of steel roof purlins is usually performed on full scale models in large vacuum test rigs. To undertake a comparison between web cleat connected purlins and flange bolted purlins a series of tests were performed on a 1:4 small scale model vacuum test rig. Various modelling issues need to be addressed to ensure reasonable comparison with actual constructed roof framing methods but still be suitable for an economical comparison between the connection methods. Model test results were supported by, and found to be in reasonable agreement with, deflection predictions from computer models based on finite element methods. This paper discusses the testing methods adopted and the value of small scale model testing programs as a means of obtaining comparisons between framing options.

• 한국컴퓨터정보학회논문지
• /
• 제9권4호
• /
• pp.13-18
• /
• 2004

본 논문은 디지털 콘텐츠 제작자에 대한 저작권관리(DRM:Digital Right Management)의 한 요소기술인 워터마크 기법으로서 주파수 공간에서의 이산웨이브릿변환을 사용하여 새로이 제안한 것이다. 본 논문에서 새로이 제안한 워터마크 삽입 및 검출 알고리즘은 에지와 스팩트럼확산 기술을 사용하여 워터마크 시퀀스를 생성하고, 이산웨이브릿 변환을 이용해서 구성하였다. 본 논문에서 제안한 방법에 대하여 여러 가지 공격을 시도한 결과 Lenna 영상을 이용한 cox의 유사도 측정값은 6이상이고, PSNR은 40dB 이상이었으며, JPEG과 COLLUSION, CLIPPING, SCALING 등에서 워터마크 기술의 다양한 평가기준에 만족하는 것을 보여주었으며, 무감지성, 강인성, 기밀성 그리고 디지틀 콘텐츠 유통의 안정성을 보장하는 방법으로서 타당함을 입증하였다.

• 복식문화연구
• /
• 제20권5호
• /
• pp.679-694
• /
• 2012

The purpose of this study was to develop a logo type for a new fashion brand and to present design cases that apply the relevant logo type to suggest an advisable direction for logo design. This study analyzed the logo designs of domestic and foreign fashion brands and used the data to develop a logo type for a brand name that reflects the concept of the newly launched brand, in addition to presenting the relevant design process and method. Besides a literature review, this study conducted case analyses of domestic and foreign fashion brand logos. This is an empirical study in which researchers developed a logo type and presented designs that applied it. The research results are as follows. The brand name of the new L Fashion brand in Korea is 'LEAY'. This study developed a logo using the initials L, E, A, and Y, each standing for life, love, and liberty; esteem, eternity; act, art; and youth. The Caslon type font, which evokes a casual yet modern sentiment, was used for the design. Cleats and zippers, which are decorative subsidiary materials used in labels, tags, shopping bags, clothing, and props, were applied in the design of the developed logo type. All design cases was produced into articles. The case of fashion brand logo design and development presented in this study implies that the development of fashion brand logos and the logo-applied product design must be tied to the launching and planning process; thus, logo development must be based on the brand concept in relation to the market entry strategy that satisfies both producers and customers.

• Structural Engineering and Mechanics
• /
• 제73권6호
• /
• pp.613-620
• /
• 2020

The research study is focuses on a form of all-bolted joint with the external ring stiffening plate in the prefabricated steel structure. The components are bolted at site after being fabricated in the factory. Six specimens were tested under cyclic loading, and the effects of column axial compression ratio, concrete-filled column, beam flange sub plate, beam web angle cleats, and spliced column on the failure mode, hysteretic behavior and ductility of the joints were analyzed. The results shown that the proposed all-bolted joint with external ring stiffening plate performed high bearing capability, stable inflexibility degradation, high ductility and plump hysteretic curve. The primary failure modes were bucking at beam end, cracking at the variable section of the external ring stiffening plate, and finally welds fracturing between external ring stiffening plate and column wall. The bearing capability of the joints reduced with the axial compression ratio increased. The use of concrete-filled steel tube column can increase the bearing capability of joints. The existence of the beam flange sub plate, and beam web angle cleat improves the energy dissipation, ductility, bearing capacity and original rigidity of the joint, but also increase the stress concentration at the variable section of the external reinforcing ring plate. The proposed joints with spliced column also performed desirable integrity, large bearing capacity, initial stiffness and energy dissipation capacity for engineering application by reasonable design.

• The Korean Journal of Physiology
• /
• 제25권1호
• /
• pp.27-35
• /
• 1991

Generally, it has been known that cholecystokinin (CCK) release into the plasma is under cholinergic control, but secretin release is not. Thus in anesthetized dogs we studied the effect of atropine $(50\;{\mu}g/kg\;followed\;by\;50\;{\mu}g/kg/hr)$ on pancreatic secretion and plasma concentrations of bioactive CCK and immunoreactive secretin in response to intraduodenal perfusion of sodium oleate (1, 3 and 9 mmol/hr). The volume, protein output and bicarbonate output of the secretion were increased by sodium cleats and this oleate-induced secretion was decreased significantly by atropine administration. However the increased plasma CCK and secretin levels by sodium oleate were not changed by atropine. These results indicate that atropine suppressed sodium oleate-induced pancreatic secretion through inhibiting cholinergic mechanism directly rather than decreasing the release of pancreatic secretory hormones. In another set of experiments, bilateral cervical vagi were stimulated electrically to observe the changes of pancreatic secretion and the above two plasma hormone levels in the presence or absence of atropine. In the vagally stimulated dogs, the volume, protein output and bicarbonate output of the pancreatic secretion were increased significantly. Both plasma secretin and CCK were concomitantly released significantly by vagal stimulation. Atropine significantly depressed the pancreatic secretory response as well as the release of these two pancreatic secretory hormones. Therefore, we conclude that in the presence of atropine the depressed pancreatic response to vagal stimulation is at least, in part, due to decreased release of endogenous CCK and secretin. In the vagally stimulated animals, however, the involvement of direct cholinergic influence on pancreatic exocrine gland remains to be answered.

• Geomechanics and Engineering
• /
• 제29권2호
• /
• pp.145-154
• /
• 2022

Complex geological conditions have a great influence on the mining of coalbed methane (CBM), which affects the extraction efficiency of CBM. This investigation analyzed the complicated geological conditions in the Liujia CBM block of Fuxin. A geological model of heterogeneities CBM reservoirs was established to study the influence of strike direction of igneous rocks and fault structures on horizontal well layout. Subsequently, the dual-porosity and dual-permeability mathematical model was established, which considers the dynamic changes of porosity and permeability caused by gas adsorption, desorption, pressure change. The results show that the production curve is in good agreement with the actual by considering gas seepage in matrix pores in the model. Complicated geological structures affect the pressure expansion of horizontal wells, especially, the closer to the fault structure, the more significant the effect, the slower the pressure drop, and the smaller the desorption area. When the wellbore extends to the fault, the pressure expansion is blocked by the fault and the productivity is reduced. In the study area, the optimal distance to the fault is 70 m. When the horizontal wellbore is perpendicular to the direction of coal seam igneous rock, the productivity is higher than that of parallel igneous rock, and the horizontal well bore should be perpendicular to the cleat direction. However, the well length is limited due to the dense distribution of igneous rocks in the Liujia CBM block. Therefore, the horizontal well pumping in the study area should be arranged along the direction of igneous rock and parallel plane cleats. It is found that the larger the area surrounded by igneous rock, the more favorable the productivity. In summary, the reasonable layout of horizontal wells should make full use of the advantages of igneous rock, faults and other complex geological conditions to achieve the goal of high and stable production.

• 한국운동역학회지
• /
• 제26권1호
• /
• pp.11-20
• /
• 2016

Objective: This study aimed to compare biomechanical data between elite and beginner cyclists during cycle pedaling by performing a comparative analysis and to provide quantitative data for both pedaling performance enhancement and injury prevention. Methods: The subjects of this study included 5 elite cyclists (age: $18{\pm}0years$, body mass: $64.8{\pm}9.52kg$, height: $173.0{\pm}4.80cm$) and 5 amateur cyclists (age: $20{\pm}0years$, mass: $66.6{\pm}2.36kg$, height: $175.6{\pm}1.95cm$). The subjects pedaled on a stationary bicycle mounted on rollers of the same gear (front: 50 T and rear: 17 T = 2.94) and cadence of 90. The saddle height was adjusted to fit the body of each subject, and all the subjects wore shoes with cleats. In order to obtain kinematic data, 4 cameras (GR-HD1KR, JVC, Japan) were installed and set at 60 frames/sec. An electromyography (EMG) system (Telemyo 2400T, Noraxon, USA) was used to measure muscle activation. Eight sets of data from both the left and right lower extremities were obtained from 4 muscles (vastus medialis oblique [VMO], vastus lateralis oblique [VLO], and semitendinosus [Semitend], and lateral gastrocnemius [Gastro]) bilaterally by using a sampling frequency of 1,500 Hz. Five sets of events ($0^{\circ}$, $90^{\circ}$, $180^{\circ}$, $270^{\circ}$, and $360^{\circ}$) and 4 phases (P1, P2, P3, and P4) were set up for the data analysis. Imaging data were analyzed for kinematic factors by using the Kwon3D XP computer software (Visol, Korea). MyoResearch XP Master Edition (Noraxon) was used for filtering and processing EMG signals. Results: The angular velocity at $360^{\circ}$ from the feet was higher in the amateur cyclists, but accelerations at $90^{\circ}$ and $180^{\circ}$ were higher in the elite cyclists. The amateur cyclists had greater joint angles at $270^{\circ}$ from the ankle and wider knee joint distance at $0^{\circ}$, $180^{\circ}$, and $360^{\circ}$ than the elite cyclists. The EMG measurements showed significant differences between P2 and P4 from both the right VLO and Semitend. Conclusion: This study showed that lower body movements appeared to be different according to the level of cycle pedaling experience. This finding may be used to improve pedaling performance and prevent injuries among cyclists.

• 박물관보존과학
• /
• 제26권
• /
• pp.119-142
• /
• 2021

금동은제식리는 무령왕릉에서 출토된 무령왕의 식리로 결실된 부분이 많아 재조사의 필요성이 꾸준히 제기되었다. 이에 과학적인 보존처리 및 분석을 진행하여 제작기법을 연구하였다. 보존처리는 형태 복원 및 편 접합에 중점을 두고 실시하였다. 그 결과, 우측 식리 상연과 뒤축 일부 편을 접합하여, 결합방법 및 발등 결합에 사용된 원두정의 개수를 확인하였다. 성분 분석결과, 외판 등은 순동에 수은 아말감 금도금을 한 것으로 추정되며, 내판은 순은을 사용하였다. 금동은제식리의 주문양은 봉황문, 연화문, 6엽 화문이며, 전체적으로 연화문의 비율이 높다. 각 판의 결합은 영락사, 금동사, 원두정, 사면정을 사용하였다. 내·외판 결합은 영락사를 사용하였는데, 내측판의 중앙과 후면에는 금동사로만 결합하여 장식 기능과 결합 기능을 구분하여 사용한 것으로 추정된다. 또한 제작과정에서 금동제판과 은제판의 외면에는 광쇠질한 흔적이 확인되지만, 은제판의 내면에서는 확인되지 않아 내면보다 외면의 마무리에 중점을 둔 것으로 추정된다.