• The Journal of the Korean dental association
• /
• v.54 no.7
• /
• pp.542-550
• /
• 2016

Recent technological advance have greatly expanded the application of invisible orthodontic treatment using clear thermoplastic materials. However, the final outcomes using clear aligner system do not achieve the level of final goal frequently, which results in case refinement, midcourse correction, or fixed orthodontic treatment. Therefore, mechanical properties of thermoplastic materials should be considered to improve the quality of outcomes. The purposes of this special article were to evaluate the force and stress depending on the materials, deflection and thickness of thermoplastic materials and to evaluate the mechanical properties of thermoplastic materials after repeated loading. Thickness and amount of deflection rather than products and materials showed the largest effect on force and stress. In all products, at least 159 gf of force was required for more than 1.0 mm deflection or when materials with 1.0 mm thickness were deflected. Orthodontic forces delivered by thermoplastic materials depend on the materials, thickness, amount of activation, and intra-oral condition. Proper thickness of thermoplastic materials and deflection level of tooth movement should be decided for the efficient and physiologic tooth movement.

• Journal of the Optical Society of Korea
• /
• v.14 no.4
• /
• pp.383-387
• /
• 2010

The stereoscopic three-dimensional (3D) display provides a 3D image by inducing binocular disparity for the observers who wear special glasses. With the rapid progress in flat panel display technologies, the stereoscopic 3D display is becoming a new benefit-model of the current display industry, and several kinds of commercial stereoscopic 3D products have been released and are attracting people. Nowadays, the motion picture quality of the 3D image becomes as important as resolution or luminance since most of the commercial 3D products are 3D televisions or 3D monitors which are required to display a clear motion 3D image. In this paper, an analysis and simulation of the motion picture quality of stereoscopic 3D image is proposed, and a comparison of the motion picture performance among the current stereoscopic 3D technologies is also provided.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.473-476
• /
• 2005

Today's manufacturing industry is facing challenges from advanced difficult-to-machine materials (WC-Co alloys, ceramics, and composites), stringent design requirements (high precision, complex shapes, and high surface quality), and machining costs. Advanced materials play an increasingly important role in modem manufacturing industries, especially, in aircraft, automobile, tool, die and mold making industries. The greatly-improved thermal, chemical, and mechanical properties of the material (such as improved strength, heat resistance, wear resistance, and corrosion resistance), while having yielded enormous economic benefits to manufacturing industries through improved product performance and product design, are making traditional machining processes unable to machine them or unable to machine them economically. In this paper, mechanical characteristic evaluation test of fine powder type WC-Co alloy was accomplished to obtain clear data for miniaturized special die parts machining with high reliability and high quality.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.11a
• /
• pp.572-575
• /
• 2005

In digital contents industry there is a high demand to convincingly mimic the appearance and behavior of natural phenomena such as smoke, waterfall, rain, and fire. Particle systems are methods adequate for modeling fuzzy objects of natural phenomena. It is clear which parameter of which action in a particular effect should be modified for a particular visual result. The generator is usable for offline animation and for real-time special effects in digital contents and virtual reality. The application programmer is able to specify different accuracy needs for different effects. This paper design special effect generator for make low-price and high-quality digital contents in reflection industry and virtual reality applications.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.2
• /
• pp.871-888
• /
• 2020

With the development of display engineering and technology, the screen and sound quality of information devices such as TVs are improving. The screen used LEDs via LCD and PDP and a large flat panel in the early CRT to create super-high resolution. The sound is improved by directly vibrating a thin and simple panel, such as an OLED. In our previous study, the exciter speaker was attached to the rear of the OLED panel to be used as the diaphragm of the speaker, and the sound quality was as good as that of the TV using the existing dynamic speaker. This method supplied the viewer with the direct sound coming from the panel, delivering clear sound, and the sound and image came from the same location, thus giving the viewer high immersion and maximizing the effect of information transfer. OLED exciter speakers, however, have a special directivity, which tends to slightly attenuate the tone at the very center of the screen. This study improves the sound quality by improving the structure of the exciter speaker and the radiated sound of the flat panel display. A 2-in-1 Exciter is made into a single core to improve the speaker's radiation pattern.

• Korean Medical Education Review
• /
• v.14 no.2
• /
• pp.59-63
• /
• 2012

Current medical students are a distinct new generation who can be distinguished from the previous generation. Therefore, a clear understanding of their characteristics is vital in developing an appropriate educational program for them. The purpose of this article is to explore the characteristics of the current generation of high achieving medical students. Notable characteristics that define this generation include the following: they feel they are special, and they are sheltered, confident, highly optimistic, pressured, conventional, and have a strong desire to achieve. They are the digital generation, who can obtain information through various forms of technology. Furthermore, they are high achieving students in highly competitive educational environments. It has been suggested that various teaching methods be used in the medical school classroom. Using digital methods could be crucial in providing high-quality medical education. Educators should pay more attention to students' psychosocial development and help them to effectively cope with their academic stress.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.764-767
• /
• 2001

Because using LB method, result that produce Arachidic acid and Stearic acid LB film and measure the accumulation characteristic and electrical characteristic is as following. Organic monolayers of surface of the water compression each 9 layer's LB film to slide glass and manufactured MIM device compressing molecular film only. Could confirm that accumulation was good seeing as absorption coefficient and SEM picture, AFM picture that prevent manufactured LB films. Formation of domain of coexistence form that prevent LB film is indefinite and distinction of border side was not clear, and could know that roughness appears greatly. Obtained current by applied voltage could know that is proportional almost, though Arachidic acid appeared as bulk of current that happen in equaler certification voltage than Stearic acid is less, this alkyl chain longer Arachidic acid that serving relations special quality is superior know can .

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.2
• /
• pp.181-185
• /
• 2008

In this paper, we investigates accident actual conditions of electric outlet for low voltage that is used into interior and clear hazardous factor. Electric outlet for general can know that melting of socket-outlet and carbonization of support occur if a contaminant becomes burnout because is flowed in. Existent outlet consists of structure that special quality is good but inflow of a contaminant is easy when is dry. But, waterproof outlet passes silicon layer and have connected structure plug. As developed outlet covers whole surface and back side, interval was shut. Safety pin of developed outlet was established to operate to vertical direction. Therefore, we estimate that contribute on prevention of electrical disaster if use developed outlet to a restaurant, a laundry, a laboratory etc.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.1
• /
• pp.135-146
• /
• 2011

Despite the recession that has affected people's consumption of clothing, the 'Gold Kids' market shows steady growth. This study analyzed the characteristics of components that make up infant and children's wear brands. Firstly, this study found the linguistic features of infant and children's clothing brands. Most brand names have common characteristics such as idiomatic expressions, combination and separation of vocabulary, and more than 6 syllables. Also, when they formative brand quality, they frequently used words like 'girl', 'kid' and 'baby' to clarify the category of the brand product. Also it is meant to present a clear brand concept to the target consumer to offer their brand information and product characteristics. Moreover, English is widely used in the brand names, and they used appropriate symbol graphics that fit the titles and qualities of the brands. Second, to strengthen their brand identity and inherent concepts, infant and children's clothing brands normally use their own particular brand colors wich makes special and strong visual impressions on the target consumer. Also, they mainly use applied sans serif typeface showing the softer brand quality. Brand logos have different visual expressions depending on their brand value and the target consumer. The word type of the logos presents clear brand identity and information to the target consumer. Through the study, we found that infant and children's clothing brands tend to use written brand names for the logo type more than graphic symbol logo patterns. This indicates that infant and children's clothing brands tend to emphasize information transfer rather than visual graphic symbols when they organize brand logos.

• Journal of Korean Society of Forest Science
• /
• v.110 no.4
• /
• pp.601-609
• /
• 2021

The fructification characteristics, fruit quality, and yield of the 'Hwangsil' jujube tree were analyzed at various stages of growth age (3-8 years old) to obtain basic data for developing high-quality jujube production technology. The average height, crown area, stem diameter near the root, stem clear length, the number of the main branches, and the distance between any two main branches were 230.8 cm (224.4~247.2 cm), 3.0 m² (2.1~3.8m²), 4.8 cm (2.4~6.2 cm), 69.1 cm (46.6~78.0 cm), 12.9 (8.6~19.6), and 8.1 cm (7.4~9.0 cm), respectively. Tree age was positively correlated with the crown area, stem diameter near the root, but stem clear length negatively correlated with the number of main branches. The average number of fruits per mother bearing shoot and tree was 20.0 (14.3~26.3) and 302.8 (257.3~373.5), respectively. There was no correlation between tree age and fructification characteristics, such as the number of fruit-bearing mother shoots per the main branch, the number of fruit-bearing shoots per fruit-bearing mother shoot, and the number of fruits per fruit-bearing shoot. Since the shape of the jujube tree is constantly managed based onthe growing area and type of greenhouse where the tree grown. The average fruit weight, fruit hardness, and soluble solid content were 24.2 g (22.4~26.8 g), 28.4 N (27.3~30.0 N), and 19.0% (17.1~19.8%), respectively, with no correlation between the tree age and fruit quality. The average yield was 7.4 kg per tree (5.7~9.1 kg), with significantly high quantities were produced in six and seven years old trees.