• 보존과학회지
• /
• 제27권3호
• /
• pp.333-344
• /
• 2011

철제유물의 보존처리 과정 중 표면 이물질 제거는 유물의 원형을 찾아주는 중요한 단계이다. 현재 표면 이물질 제거 시 가장 많이 사용하는 sand blaster (air brasive)의 경우, 분사되는 유리가루는 인체에 유해하고 환경오염을 유발하는 주요한 물질이다. 그러므로 이런 문제점을 보완하기 위해 타 산업분야에서 친환경세정장비로 많이 쓰이고 있는 $CO_2$ snow cleaning을 철제유물 표면 이물질 제거에 적용하여 비교·연구 하였다. 실험은 부식시험편과 철제유물에 sand blaster와 $CO_2$ snow cleaning을 적용하여 비교 분석하였다. 부식시험편의 경우, sand blaster와 $CO_2$ snow cleaning 방법 모두 이물질 제거 정도, 표면 거칠기, 색도 측정 결과가 유사하게 나타났으며, 특히 SEM을 통해 $CO_2$ snow cleaning을 적용한 부식시험편은 sand blaster에 비해 표면을 마모시키지 않는 것을 확인하였다. 또한 철제유물에 적용한 경우, $CO_2$ snow cleaning의 power nozzle은 sand blaster에 비해 표면을 마모시키지 않고 고른 표면을 유지하는 등 세정효과가 우수하게 나타났다. 그리고 X-ray촬영을 통해 이물질 제거 전과 후 금속 내부의 구조적 변화는 없음을 관찰하였다. 결론적으로 sand blaster와 $CO_2$ snow cleaning의 power nozzle은 이물질 제거 효과가 유사함을 확인할 수 있었다. 그러나 $CO_2$ snow cleaning의 power nozzle을 철제유물에 적용하여도 sand blaster와 유사한 효과는 얻을 수 있으나, 분사압력이 높을 경우 철제 유물이 손상될 우려가 있으므로 유물 내부 상태에 따라 적용여부를 판단해야 함을 본 실험을 통하여 알 수 있었다.

• 보존과학회지
• /
• 제19권
• /
• pp.19-30
• /
• 2006

저습지에서 출토된 상수리나무를 재료로 세척에 따른 수침고목재 내 이물질의 제거 효과와 물리 화학적 특성 변화를 파악하였던 바 얻어진 결과는 다음과 같다. 수침고목재에 나타나는 대부분의 무기성분은 수침고목재가 매몰된 토양환경의 성분과 거의 동일하였다. 보존처리 현장에서 적용하고 있는 세척방법 즉, 도구법, 탈기법, EDTA법 및 초음파세척법을 적용하여 독립적 혹은 연속적 방법으로 수침고목재를 세척하였다. 독려세척의 경우 도구법에 의해 표면에 고착된 이물질이 효과적으로 제거되었고, EDTA 처리에 의해 표면 색상이 밝아졌다. 그러나 탈기법과 초음파에 의한 세척효과는 나타나지 않았다. 연속 세척의 경우 1단계 세척(도구법)은 독립세척과 동일한 효과를 얻었으며, 2단계 세척인 탈기법은 수침고목재 내에 있는 이물질을 제거하지 못했다. 탈기법이 무기물의 제거에는 적절하지 않았지만, 탈기 후 수침고목재가 균일화되어 치수안정제의 침투를 용이하게 하는 역할은 결코 무시할 수 없을 것으로 사료된다. 3단계 EDTA처리는 수침고목재 내의 철분(Fe)을 제거함으로써 수침고목재의 색상이 밝아지는 효과를 얻을 수 있었다. 4단계 세척은 3단계 세척시 목재 내에 잔류한 약품(Na)과 미세 이물질의 제거에 효과적이었다.

• 청정기술
• /
• 제14권2호
• /
• pp.103-109
• /
• 2008

본 연구에서는 솔더페이스트(solder paste)로 솔더링후 표면에 잔류하는 플럭스(flux)의 효과적인 세정성능 평가방법 개발을 목적으로 하였다. 솔더링시 플럭스의 퍼짐오차를 줄이기 위해 본 연구에서 고안한 금속치구를 이용하여 1,1,1-TCE 및 플럭스 제거용 몇 가지 대표 준수계 대체세정제에 대하여 세정시간에 따른 플럭스 제거율을 무게측정법으로 측정, 비교하였다. 세정시간 변화에 따른 각 세정제의 세정효율을 측정한 결과 측정값들의 상대표준편차(RSD)가 약 4%이하로 data의 신뢰성이 확인되었다. 따라서 솔더페이스트로 솔더링후 대체세정제의 잔류플럭스의 세정성능 평가시험에 본 연구에서 적용한 금속치구(metal test tool)를 이용한 평가방법이 유력한 방법으로 적용가능할 것으로 판단된다. 그리고 이 평가방법을 적용한 결과 현재 상용화 되어 있는 우수하다고 알려진 몇 가지 대표 준수계 대체세정제 중 ST100SX와 750H가 고활성 플럭스에 대한 세정력이 우수한 성능을 나타냈으나 기존의 1,1,1-TCE에 비해서는 현저히 떨어짐을 확인할 수 있었다.

• Corrosion Science and Technology
• /
• 제8권6호
• /
• pp.209-216
• /
• 2009

In this study the effect of different surface finishing techniques on the pitting corrosion behaviour of a commercial 304 stainless steel alloy was investigated. Surface finishing methods were divided into two categories, i.e. mechanical and chemical. Mechanical treatment methods include power tooling such as grinding, emery paper brushing, stainless steel wire brushing and stainless steel shot blasting. Chemical treatment methods include chemical passivation (phosphoric acid, citric acid, nitric acid) and electro-cleaning (phosphoric acid and citric acid). Potentiodynamic polarization experiments were carried out in 3.5 wt. % NaCl solution at room temp. (20 $^{\circ}C$). The results showed that chemical treatment methods improved the corrosion resistance of stainless steel 304, measured in terms of pitting potential ($E_{pit}$). Corrosion resistance of the specimens was increased in the order of; electro-cleaning > manual passivation > mechanical cleaning. Surface of electro-cleaned specimens was smoother than rest of the surface treatment methods. Chrome content in chemically treated specimens was higher than in mechanically treated specimens as shown by EDX analysis.

• 로봇학회논문지
• /
• 제17권3호
• /
• pp.381-386
• /
• 2022

We develop a business model for facade cleaning service robot system that provides service by meeting the market needs and environments. The size of the facade cleaning market is growing rapidly in recent years due to the increasing importance of indoor space and the modern trend of building construction methods. Also, maintenance of exterior appearance of buildings has become an important factor in residential and commercial facilities. Though demand for facade cleaning services is rising, the current facade cleaning services are performed dangerously in a human labor-dependent way. It is desirable that the existing human resource service should be replaced with robot-based services. In addition, quantitative analysis of rental pricing model was conducted to propose effective launch of products to the market. The robot system is economically attractive from the consumer's point of view. When the actual facade cleaning robot service is released, it is expected that verification of the business models and more accurate analysis with specific figures can be performed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.415-419
• /
• 2002

In this study, we suggest a environmentally-conscious and dry cleaning process mechanism for the recycling of end-of-life CRT, and also develope a protype cleaning system to verify the faulty of the designed mechanism. This system accommodates the specifications of 14 ~ 32" end-of-life CRT. In experimental result, it is expected that the developed system improve the productivity up to 10% and decrease the loss rate of cleaning glass 3~4 times rather than the existing methods.hods.

• 한국정밀공학회지
• /
• 제20권1호
• /
• pp.126-134
• /
• 2003

In this study, we suggest a environmentally-conscious and dry cleaning process mechanism for the more useful recycling of end-of-life CRT, and also develop a prototype cleaning system to verify the faulty of the designed mechanism. This system accommodates the specifications of 14∼32" end-of-life CRT. In experimental result, it is expected that the developed system improve the productivity up to 10% and decrease the loss rate of cleaning glass 3∼4 times than the glass blasting methods.

• 한국염색가공학회지
• /
• 제2권3호
• /
• pp.43-50
• /
• 1990

The purpose of this paper is to investigate the dyes solubility of dry cleaning solvents among the current domestic products. The dyes were experimented in following way; 1) The flow rate of dyes by paper chromatography method. 2) The color difference & the absorbance of solvents between the dyed fabrics before and after dry cleaning. From the experiment, following results were obtained. 1. In paper chromatography methods, the flow rate of dyes in the disperse dyes was bigger while flow was not shown in the direct dyes & acid dyes. 2. The more the number of times on dry cleaning in dyed fabrics was, the higher the absorbance of solvents was shown. The results were showed following order, PerchloroethyleneHydrocarbon> Fluorocabon. 3. The color difference between before & after dry cleaning on dyed fabrics showed bigger in disperse dyes.

• 한국의상디자인학회지
• /
• 제21권4호
• /
• pp.213-220
• /
• 2019

The dry cleaning effect related to the type of soil and fiber was analyzed using silicone and alcohol-based solvents(ethyl alcohol, isopropyl alcohol, acetone) that are relatively safe for the human body and environment to improve the detergency of hydrophilic soils in dry cleaning system. Based on this analysis, an effective dry cleaning method to be carried out for improving the detergency according to the type of hydrophilic soils. After dry cleaning was performed using 20 types of artificial soiled fabrics consisting of 7 types of fibers and 4 types of hydrophilic soils, the detergency was measured and the results were compared and analyzed by solvents and fiber types. The results are presented as follows; first, the detergency of hydrophilic soils using silicone solvents showed a low rate of detergency. In particular, the tannin soil showed a lower level of detergency compared to the protein soil. Second, the detergency of hydrophilic soils using silicon solvents with dry soap differed in some detergency according to the soil and fiber types. Especially, the detergency of curry soil on cotton fabric showed significant improvement. Third, the protein soil was not removed from dry cleaning using alcohol-based solvents, but the effect of dry cleaning of curry soil on both cotton and polyester fabric was substantially improved. As a result, the elimination of blood soil is more effective in silicon solvents than in alcohol-based solvents. The removal of tannin soils may improve detergency by adding dry soap to silicon solvents or by using alcohol-based solvents as alternative solvents. The use of alternative solvents such as silicon and alcohol solvents can contribute to the environmental improvement of the dry cleaning industry, which uses petroleum-based solvents. It is also expected to provide consumers with the opportunity to choose eco-friendly and efficient dry cleaning methods.

• Corrosion Science and Technology
• /
• 제15권2호
• /
• pp.84-91
• /
• 2016

The transport and deposition of corrosion products in pressurized water nuclear reactor (PWR) steam generators have led to corrosion (SCC, denting etc.) problems. Lancing, mechanical cleaning and chemical cleaning have been used to reduce these problems. The methods of lancing and mechanical cleaning have limitations in removing corrosion products due to the structure of steam generator tubes. But high temperature chemical cleaning (HTCC) with EDTA is the most effective method to remove corrosion products regardless of the structure. However, EDTA in chemical cleaning aqueous solution and chemical cleaning environments affects the integrity of materials used in steam generators. The nuclear power plants have to perform the pre-test (also called as qualification test (QT)) that confirms the effect on the integrity of materials after HTCC. This is one of the series studies that assess the effect, and this study determines the effects of 20 % EDTA aqueous solution on defective tubes in high temperature chemical cleaning environments. The depth and magnitude of defects in steam generator (SG) tubes were measured by eddy current test (ECT) signals. Surface analysis and magnitude of defects were performed by using SEM/EDS. Corrosion rate was assessed by weight loss of specimens. The ECT signals (potential and depth %) of defective tubes increased marginally. But the lengths of defects, oxides on the surface and weights of specimens did not change. The average corrosion rate of standard corrosion specimens was negligible. But the surfaces on specimens showed traces of etching. The depth of etching showed a range on the nanometer. After comprehensive evaluation of all the results, it is concluded that 20 % EDTA aqueous solution in high temperature chemical cleaning environments does not have a negative effect on defective tubes.