• Mineral and Industry
• /
• v.29
• /
• pp.56-66
• /
• 2016

In Korea, where hydrothermal alteration zones are widely distributed, clay veins formed by hydrothermal alteration processes on natural slopes or artificial slopes can play an important role in the slope stability. When the surface water infiltrates the ground where the clay vein exists, the pore water pressure in the ground can be locally increased due to impermeable properties of clay minerals. Infiltration of the surface water induces the increase in the pore water pressure, which can cause erosion of the fine clay particles. The eroded clay particles flow and deposit in an area where the flow velocity is slowed down. Where clay minerals are deposited, ground water can leak due to an increase in local pore pressures, which can cause slope failure. In this paper, studies related to hydrothermal clay vein and landslide are introduced.

• Economic and Environmental Geology
• /
• v.43 no.2
• /
• pp.185-196
• /
• 2010

Clay veins that occurred in a slope by hydrothermal alteration, can significantly affect its slope stability. The effect of clay veins on the slope stability was investigated by numerical modeling study. Various parameters such as cohesion, internal friction angle, orientation, groundwater level, rainfall intensity and duration, have been modelled. As shear strength increased, factor of safety increased. As groundwater level developed, factor of safety decreased. For the case of slip surface developed on interface, factor of safety was lower than that for case of slip surface developed on either weathered soil or clay vein. The effect of various soil types of the slope stability was also investigated by simulating seepage through the slopes with various soils. The groundwater level significantly increased on the slopes with silty and generic soils. For the slope with sandy soil, almost no change in groundwater level was observed due to rapid drainage.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.3 s.45
• /
• pp.215-225
• /
• 2005

Numerous clay veins along fractures such as fault, joints, cracks and small fissures are found in granitic rocks in the Korean Peninsula. Granitic rocks of three geological stages (Jurassic, Cretaceous and Paleogene) occur in the Korean Peninsula, and are known as the Daebo, Bulguksa and Hoam granites, respectively. Specimens from clay veins composed or mainly mica clay mineral (illite) were dated using the K-Ar method with the hosted granitoids. The respective ages were as follows. Jurassic: granites 143.7 Ma and 160 Ma, clay mineral veins 104 Ma and 107 Ma: Cretaceous: granite 133.2 Ma, clay mineral veins 93.6 Ma, 84.2 Ma and 84.3 Ma: Paleogene: granite 39.7 Ma and 35.4Ma, clay mineral veins 27.1 Ma and 23.9 Ma. The ages of the clay veins in the Korean Peninsula are clearly much younger than those of their hosted granitoids. This contrasts with data for similar clay veins in Cretaceous and Paleogene granitoids in southwest Japan, where the K-Ar ages of mica clay minerals are slightly younger than their host rocks, or are almost the same.

• Economic and Environmental Geology
• /
• v.28 no.6
• /
• pp.571-577
• /
• 1995

Several acid-sulfate clay deposits associated with silicic magmas occur in the Haenam area of the southwestern part of Korea. Geology of the studied area consists of tuffs, granitic rocks, quartz porphyry, rhyolite, andesite and sedimentary rocks. The granitic rocks and quartz porphyry intruded tuffs and sedimentary rocks. The rhyolite and tuffs around the mines have undergone hydrothermally weak or strong alteration. Gold contents with major and trace elements have been determined for a total of sixty-seven specimens of fresh igneous rocks, wall rocks and minerals such as dickite and alunite by graphite furnace atomic absorption spectrometer and inductively coupled plasma. Gold is enriched in the alunite vein and the silicified zone, but is depleted in dickites and hydrothermally altered rocks with dickite of the Seongsan deposit. Gold is especially concentrated near the faults or conjunction area of two faults. High content of gold is shown in the mineral assemblages of alunitequartz- pyrite in the alunite vein and silicic zone of the Seongsan deposit compared with that of minerals and rocks from another deposits distributed in the studied area. Gold content in tuffs and dickites with pyrite is generally low. Gold content in silicified tuff tends to show positive correlations with content of As, Hg and Sb. Variation trends of Cd, Hg and Sb are similar to those of gold content. From the result of gold content variations, gold may be transported and concentrated by mineralizing solutions ascending along the cracks like fault. Therefore, it is important to survey alunite vein and silicified zone at the conjunction of faults, and to analyze pathfinder elements such as As, Hg and Sb for geological and geochemical exploration of gold in the studied deposits.

• The Journal of the Petrological Society of Korea
• /
• v.28 no.3
• /
• pp.157-169
• /
• 2019

Pseudotachylytes, produced by frictional heating during seismic slip, provide information that is critical to understanding the physics of earthquakes. We report the results of occurrence, structural characteristics, scanning electron microscopic observation and geochemical analysis of pseudotachylytes, which is presumed to have formed after the Late Cretaceous in outcrops of the Paleoproterozoic granitic gneiss on the Bulil waterfall of the Jirisan area, Yeongnam massif, Korea. Fault rocks, which are the products of brittle deformation under the same shear stress regime in the study area, are classified as pseudotachylyte and foliated cataclasite. The occurrences of pseudotachylyte identified on the basis of thickness and morphology are fault vein-type and injection vein-type pseudotachylyte. A number of fault vein-type pseudotachylytes occur as thin (as thick as 2 cm) layers generated on the fault plane, and are cutting general foliation and sheared foliation developed in granitic gneiss. Smaller injection vein-type pseudotachylytes are found along the fault vein-type pseudotachylytes, and appear in a variety of shapes based on field occurrence and vein geometry. At a first glance fault vein-type seudotachylyte looks like a mafic vein, but it has a chemical composition almost identical to the wall rock of granitic gneiss. Also, it has many subrounded clasts which consist predominantly of quartz, feldspar, biotite and secondary minerals including clay minerals, calcite and glassy materials. Embayed clasts, phenocryst with reaction rim, oxide droplets, amygdules, and flow structures are also observed. All of these evidences indicate the pseudotachylyte formed due to frictional melting of the wall rock minerals during fault slip related to strong seismic faulting events in the shallow depth of low temperature-low pressure. Further studies will be conducted to determine the age and mechanical aspect of the pseudotachylyte formation.

• Nuclear Medicine and Molecular Imaging
• /
• v.42 no.5
• /
• pp.401-409
• /
• 2008

Purpose: Recently multi-modal imaging system has become widely adopted in molecular imaging. We tried to fabricate animal-specific positioning molds for PET/MR fusion imaging using easily available molding clay and rapid foam. The animal-specific positioning molds provide immobilization and reproducible positioning of small animal. Herein, we have compared fiber-based molding clay with rapid foam in fabricating the molds of experimental animal. Materials and Methods: The round bottomed-acrylic frame, which fitted into microPET gantry, was prepared at first. The experimental mice was anesthetized and placed on the mold for positioning. Rapid foam and fiber-based clay were used to fabricate the mold. In case of both rapid foam and the clay, the experimental animal needs to be pushed down smoothly into the mold for positioning. However, after the mouse was removed, the fabricated clay needed to be dried completely at $60^{\circ}C$ in oven overnight for hardening. Four sealed pipet tips containing $[^{18}F]FDG$ solution were used as fiduciary markers. After injection of $[^{18}F]FDG$ via tail vein, microPET scanning was performed. Successively, MRI scanning was followed in the same animal. Results: Animal-specific positioning molds were fabricated using rapid foam and fiber-based molding clay for multimodality imaging. Functional and anatomical images were obtained with microPET and MRI, respectively. The fused PET/MR images were obtained using freely available AMIDE program. Conclusion: Animal-specific molds were successfully prepared using easily available rapid foam, molding clay and disposable pipet tips. Thanks to animal-specific molds, fusion images of PET and MR were co-registered with negligible misalignment.

• Economic and Environmental Geology
• /
• v.48 no.2
• /
• pp.103-114
• /
• 2015

Jinsan gold deposit is a hydrothermal vein type deposit consisting of several fissure filling quartz veins developed within the Changri Formation of the Ogcheon Supergroup in Geumsan, Chungnam. This study is to provide an efficient exploration and development strategies based on the characteristics of the geology, geological structure, core logging, and ore vein occurrence and grade for the four pits (New pit, Main pit, Yanghapan pit and Teugho pit). Quartz veins are mostly developed with the strike of $N10^{\circ}-25^{\circ}W$ and $N5^{\circ}-20^{\circ}E$, and the thickness is in the range of 0.1~0.5 m, sometimes extending to over 1m. Although the quartz veins commonly form massive shape, they sometimes show zonal structure, comb structure as well as brecciated texture. Major ore minerals are pyrite and chalcopyrite, and pyrrhotite, sphalerite, galena, marcasite, electrum and chalcocite are also accompanied as minor phases. Gray and milky white quartz veins, which are occasionally crosscut by calcite vein, also include fluorite. Ore evaluations for the 22 samples revealed that the samples from the pits generally have very low Au contents, lower than 1 g/t, but some clay samples of drilled core show very high Au concentrations, up to 141 g/t, indicating that Au content is much higher within fault gouges rather than within fresh quartz veins. This may represent that gold might have been reworked and reprecipitated by hydrothermal fluids in association with reactivation of the faults, and thus suggest that ore occurrence in this deposit is very complex and irregular and therefore more precise and systematic exploration is required.

• Journal of the Mineralogical Society of Korea
• /
• v.11 no.2
• /
• pp.85-96
• /
• 1998

The sericite ore is formed by the hydrothermal alteration of rhyodacitic welded tuff. The alteration zone of the host rock can be classified into four types based on the mineral assemblages ; sericite, quartz-sericite, silicified and propylite zone. The sericite ore mainly occurs as vein types and fault clay along the fault plane in the quartz-sericite zone. Mineral components of the sericite ore are mainly sericite with minor diaspore, corundum and pyrite. The sericitic porcelaineous ore is mainly composed of quartz and sericite. Accessory minerals are muscovite, diaspore, sphene, corundum, pyrite, iron-oxides and etc. The chemical compositions of K2O, Al2O3, and ignition loss in the sericite ore increase largely than that of the host rock, while the compositions of SiO2, Na2O and Fe2O3 decrease. XRD patterns of the heat-treated sericite ores show the formation of mullite at $1,200^{\circ}C$. and the diaspore-bearing sericite ore forms mullite and corundum at $1,200^{\circ}C$. The differential thermal analysis of the sericite ores show small endothermic peak at 645~668$^{\circ}C$. and the diaspore-bearing sericite ore shows a strong endothermic peak at $517^{\circ}C$. It indicates that the decomposition of diaspore appear at lower temperature than that of sericite. The thermal expansivity of the sericite ores show the similar pattern. The sericite ores show the thermal expansivity of 3.3~4.7% at 900$^{\circ}C$ and 0.39~0.75% at 1,20$0^{\circ}C$, respectively. DTA-TG curves of the sericite ores show closely relations with the thermal expansivity.

• Economic and Environmental Geology
• /
• v.46 no.2
• /
• pp.153-163
• /
• 2013

The Ogcheon Au-Ag deposit consists of two quartz veins that fill the NE or NW-trending fissures in the metasedimentary rocks of unknown age. The quartz veins occur mainly in the massive type with partially breccia and cavity. They can be found along the strike for about minimum 50 m and varied in thickness from 0.1 to 0.3 m. The mineralogy of quartz veins from the Ogcheon deposit is mainly composed of hydrothermal alteration minerals such as pyrite, quartz, sericite, chlorite, clay minerals and sulfides including pyrite, pyrrhotite, arsenopyrite, sphalerite, chalcopyrite and galena. Fluid inclusion data from quartz indicate that homogenization temperatures and salinity of mineralization range from 184 to $362^{\circ}C$ and from 0.0 to 6.6 wt.% eq. NaCl, respectively. These suggest that ore forming fluids were progressively cooled and diluted from mixing with meteoric water. Sulfur(${\delta}^{34}S$: 0.4~8.4‰) isotope composition indicates that ore sulfur was derived from mainly magmatic source although there is a partial derivation from the host rocks. The calculated oxygen(${\delta}^{18}O$: 4.9~12.1‰) and hydrogen(${\delta}D$: -92~-74‰) isotope compositions suggest that magmatic and meteoric ore fluids were equally important for the formation of the Ogcheon deposit and then overlapped to some degree with another type of meteoric water during mineralization.

• Economic and Environmental Geology
• /
• v.44 no.3
• /
• pp.193-201
• /
• 2011

The Geopung Cu deposit consists of two subparallel quartz veins that till the NE-trending fissures in Triassic Cheongsan granite. The quartz veins occur mainly massive with partially cavity and breccia. They can be followed along strike for about 500 m and varies in thickness from 0.2 to 2.2 m. Based on the mineralogy and paragenesis of veins, mineralization of quartz veins can be divided into hypogene and supergene stages. Hypogene stage is associated with hydrothermal alteration minerals such as sericite, pyrite, quartz, chlorite, clay minerals and sulfides such as pyrite, arsenopyrite, pyrrhotite, marcasite, sphalerite, stannite, chalcopyrite and galena. Supergene stage is composed of geothite. Fluid inclusion data from quartz indicate that homogenization temperatures and salinity of hypogene stage range from 163 to $356^{\circ}C$ and from 0.2 to 7.2 wt.% eq. NaCl, respectively. They suggest that ore forming fluids were progressively cooled and diluted from mixing with meteoric water. Sulfur (${\delta}^{34}S$: 4.3~9.2‰) isotope composition indicates that ore sulfur was derived from mainly magmatic source although there is a partial derivation from the host rocks. The calculated oxygen (${\delta}^{18}O$: 0.9~4.0‰) and hydrogen (${\delta}D$: -86~-69‰) isotope compositions suggest that magmatic and meteoric ore fluids were equally important for the formation of the Geopung Cu deposit and then overlapped to some degree with another type of meteoric water during mineralization.