• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.437-440
• /
• 2010

이 논문은 발사체 노즐에 사용되는 내열성 재료인 C/SiC에 대한 이방성 물성을 예측하는 방법으로, 평면 방향의 실험 데이터를 이용해서 9개의 엔지니어링 물성을 간단하고 효과적으로 계산하는 준 이론적 접근에 대해 설명하였다. 이 방법은 C/SiC 복합재료를 직조 보강재의 굴곡율에 따라 세 층으로 이상화 하여, 고전 적층 평판이론으로 계산한다. 평면 방향으로 실행된 실험 데이터와 직조 구조물의 굴곡율을 초기 데이터로 이용하며, 측정이 어려운 두께 방향의 물성을 효과적으로 얻을 수 있었다. 예제를 통하여 이 방법의 유용성을 증명하였다.

• Steel and Composite Structures
• /
• 제46권3호
• /
• pp.319-334
• /
• 2023

Localizing damages is an essential task to monitor the health of the structures since they may not be able to operate anymore. Among the damage detection techniques, non-destructive methods are considerably more preferred than destructive methods since damage can be located without affecting the structural integrity. However, these methods have several drawbacks in terms of detecting abilities, time consumption, cost, and hardware or software requirements. Employing artificial intelligence techniques could overcome such issues and could provide a powerful damage detection model if the technique is utilized correctly. In this study, the crack localization in flat and folded plate structures has been conducted by employing a Backpropagated Artificial Neural Network (BPANN). For this purpose, cracks with 18 different dimensions in thin, flat, and folded structures having 15⁰, 30⁰, 45⁰, and 60⁰ folding angle have been modeled and subjected to free vibration analysis by employing the Classical Plate Theory with Finite Element Method. A Four-nodded quadrilateral element having six degrees of freedom has been considered to represent those structures mathematically. The first ten natural frequencies have been obtained regarding healthy and cracked structures. To localize the crack, the ratios of the frequencies of the cracked flat and folded structures to those of healthy ones have been taken into account. Those ratios have been given to BPANN as the input variables, while the crack locations have been considered as the output variables. A total of 500 crack locations have been regarded within the dataset obtained from the results of the free vibration analysis. To build the best intelligent model, a feature search has been conducted for BAPNN regarding activation function, the number of hidden layers, and the number of hidden neurons. Regarding the analysis results, it is concluded that the BPANN is able to localize the cracks with an average accuracy of 95.12%.

• 한국강구조학회 논문집
• /
• 제10권2호통권35호
• /
• pp.201-209
• /
• 1998

강섬유보강 적층복합구조물에서 온도의 변화는 구조물의 응답에 중요한 영향을 미칠수 있다. 온도의 급작스런 변화는 재료의 강도와 성질을 현저히 저하시켜 구조물의 대변형, 좌굴, 고응력상태를 유발하는 중요한 인자가 된다. 본 연구에서는 등분포로 재하된 온도하중에 의한 적층복합판의 온도좌굴에 관한 해석을 수행하였다. 전단변형의 효과를 정확히 고려하기위해 5개의 변수로 구성된 고차전단변형이론을 적용하였다. 적층판의 배열각도, 적층판의 수, 폭-두께비의 변화, 형상비의 변화에 따른 임계좌굴온도를 구하여 1차전단변형이론에 의한 결과와 고전적이론에 의한 결과와 비교분석하였다.

• 한국군사과학기술학회지
• /
• 제15권1호
• /
• pp.93-100
• /
• 2012

In this paper, the deterministic optimal design for the tail plane made of composite materials is conducted under the deterministic loading condition and compared with that of the metallic materials. Next, the reliability analysis with five random variables such as loading and material properties of unidirectional prepreg is conducted to examine the probability of failure for the deterministic optimal design results. The MATLAB programing is used for reliability analysis combined with FEA S/W(COMSOL) for structural analysis. The laminated composite is assumed to the equivalent orthotropic material using classical laminated plate theory. The response surface methodology and importance sampling technique are adopted to reduce computational cost with satisfying the accuracy in reliability analysis. As a result, structural weight of composite materials is lighter than that of metals in deterministic optimal design. However, the probability of failure for the deterministic optimal design of the tail plane structures is too high to be neglected. The sensitivity of each variable is also estimated using probabilistic sensitivity analysis to figure out which variables are sensitive to failure. The computational cost is considerably reduced when response surface methodology and importance sampling technique are used. The study of the computationally inexpensive method for reliability-based design optimization will be necessary in further work.

• Advanced Composite Materials
• /
• 제17권1호
• /
• pp.57-73
• /
• 2008

The present paper focuses on experimental verification of the ply-by-ply basis inelastic analysis of multidirectional laminates. First of all, rate dependence of the tensile behavior of balanced symmetric cross-ply T800H/epoxy laminates with a $[0/90]_{3S}$ lay-up under off-axis loading conditions at $100^{\circ}C$ is examined. Uniaxial tension tests are performed on plain coupon specimens with various fiber orientations $[{\theta}/(90-{\theta})]_{3S}$ ($\theta$ = 0, 5, 15, 45 and $90^{\circ}C$) at two different strain rates (1.0 and 0.01%/min). The off-axis stress.strain curves exhibit marked nonlinearity for all the off-axis fiber orientations except for the on-axis fiber orientations $\theta$ = 0 and $90^{\circ}$, regardless of the strain rates. Strain rate has significant influences not only on the off-axis flow stress in the regime of nonlinear response but also on the apparent off-axis elastic modulus in the regime of initial linear response. A macromechanical constitutive model based on a ply viscoplasticity model and the classical laminated plate theory is applied to predictions of the rate-dependent off-axis nonlinear behavior of the cross-ply CFRP laminate. The material constants involved by the ply viscoplasticity model are identified on the basis of the experimental results on the unidirectional laminate of the same carbon/epoxy system. It is demonstrated that good agreements between the predicted and observed results are obtained by taking account of the fiber rotation induced by deformation as well as the rate dependence of the initial Young's moduli.

• Structural Engineering and Mechanics
• /
• 제77권1호
• /
• pp.137-149
• /
• 2021

In engineering design, the axial equivalent elastic modulus of laminated FRP pipe was mostly calculated by the average elastic modulus method or the classical laminated plate theory method, which are based on relatively simplified assumptions, and may be not accurate enough sometimes. A new analytical calculation method for the axial equivalent elastic modulus of laminated FRP pipe was established based on three-dimensional stress state. By comparing the results calculated by this method with those by the above two traditional analytical methods and the finite element method, it is found that this method for the axial equivalent elastic modulus fits well not only for thin-walled pipes with orthotropic layers, but also for thick-walled pipes with arbitrary layers. Besides, the influence of the layer stacking on the axial equivalent elastic modulus was studied with this method. It is found that a proper content of circumferential layer is beneficial for improving the axial equivalent elastic modulus of the laminated FRP pipe with oblique layers, and then can reduce its material quantity under the premise that its axial stiffness remains unchanged. Finally, the meso-mechanical mechanism of this effect was analyzed. The improving effect of circumferential layer on the axial equivalent elastic modulus of the laminated FRP pipe with oblique layers is mainly because that, the circumferential fibers can restrain the rigid body rotations of the oblique fibers, which tend to cause the significant deformations of the pipe wall units and the relatively low axial equivalent elastic modulus of the pipe.

• 복합신소재구조학회 논문집
• /
• 제3권1호
• /
• pp.29-34
• /
• 2012

압축을 받는 복합적층판의 보강을 위해 폐단면리브를 적용하는 것이 효과적이나, 적정 크기나 최적 두께에 대한 충분한 연구자료가 제시되지 못하고 있다. 이에 따라 폐단면리브 단면 제원에 따른 복합적층판의 압축좌굴 거동에 대한 영향이 우선 검토되어야 할 필요성이 있다. 본 논문에서는 직교이방성 $[(0^{\circ})_4]_s$와 Cross-ply $[(0^{\circ}/90^{\circ})_2]_s$ 적층단면을 각각 고려하여 U리브 단면강성에 따른 복합적층 보강판의 탄성좌굴강도 및 좌굴모드의 변화를 수치해석적으로 검토하였다. 구조부재로써 적용성을 고려하여 U리브 단면 모델을 선정하였고 유한요소해석 프로그램인 ABAQUS를 이용하여 U리브 적층두께에 따른 고유치 해석을 실시하였다. U리브와 같은 폐단면 보강재를 적용한 복합적층판에서는 단순지지 조건의 판좌굴 강도에 비해 상승효과가 있음이 본 연구의 수치해석 결과로부터 입증되었으며 본 해석연구 대상 모델에 대해 U리브 최적 적층두께를 분석하였다. 본 논문의 연구 결과는 향후 U리브의 최적 단면 선정방안을 제시하는데 기여할 수 있을 것으로 기대된다.