• 한국컴퓨터정보학회논문지
• /
• 제29권7호
• /
• pp.181-190
• /
• 2024

본 연구는 조리 전공 관련 실습수업 만족도가 전공 학업 스트레스와 수업 참여도에 미치는 영향 정도를 조사하였다. 2023년 2학기에 광주·전남·전북 소재 6개 전문대학의 조리 전공 1학년 228명 학생을 대상으로 조사하였다. 자료처리는 SPSS Ver. 25.0을 이용하였다. 조사 자료의 일반적 특성, 신뢰도 분석, 탐색적 요인 분석, 상관관계 분석, 다중 회귀 분석을 진행하였다. 본 연구 결과는 첫째, 조리 관련 실습수업 만족도 하위 구성 요인과 학업 스트레스 및 수업 참여도 간 상관관계가 있는 것으로 나타났다. 둘째, 조리 실습수업 만족도와 전공 학업 스트레스에 미치는 영향이 유의미하게 나타났다. 셋째, 조리 실습수업 만족도가 전공 수업 참여에 미치는 영향이 유의미하게 나타났다. 결론적으로 지방 전문대 조리 관련 전공 실습수업 만족도가 학업 스트레스와 수업 참여에 영향을 미치는 것으로 나타났다. 향후, 대학 입학 전 조리 실습 경험이 실습수업 만족도와 학업 스트레스, 진로 및 취업 준비에 어떤 영향을 미치는지에 관한 후속 연구를 기대한다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2005년도 가을 학술발표논문집 Vol.32 No.2 (1)
• /
• pp.70-72
• /
• 2005

최근들어 Radio Frequency Identification (RFID) 태그가 다수의 상품에 부착되고 절러 분야에 적용되기 시작했지만, 비용문제로 인해 인증이나 암호화 같은 보안기능은 고려하지 않고 있다. 보안 기능이 없는 RFID시스템은 개인정보 노굴, 불법 리더의 접근, 위조 태그의 남용과 같은 심각한 부작용을 초래하지만 현 단계에서는 보안기능을 적용하기가 쉽지않다. 절러 기술을 따르는 수동형 태그중 EPCglobal의 EPC Class 1과 Class 1 Generation 2(C1G2)는 산업계의 여러 분야에서 특히, supply-chain 모델에서 사실상 국제표준으로 여겨진다. EPC Class1 수준의 태그는 자체 밧데리를 가지지 않는 수동형 태그이고, 암호 프리미티브를 적용한 알고리즘이나 프로토콜은 제공하지 않는다. EPC Class1 과 EPC C1G2의 유일한 보안 대책으로는 태그를 영원히 동작하지 못하게 하는 Kill 기능이 있다. Kill을 수행한 태그는 RFID 태그로서의 의미가 사라진다. 본 논문에서는 Kill 기능에 대한 EPC Class1 시스템의 취약성을 보이고 또한, EPC C1G2 시스템에서 Kill 관점에서의 보안성을 분석한다.

• 대한가정학회지
• /
• 제27권3호
• /
• pp.133-146
• /
• 1989

The purpose of this study was to investigate the differences of conjugal power type and conjugal violence level according to social class. This study was also intended to examine the relations between conjugal power type and conjugal violence level. The subjects of this study were 492 high school students in Seoul. Conjugal power was measured with used to measure the conjugal violence level. For the statistical analysis of data, x2-test, Pearson's r, F-test, Duncan's Multiple Range Test and Cronbach's α for reliability were performed. The major results of this study were summarized as follows; 1. There were significant differences according to social class in conjugal power type: The higher social class of the family, the more Syncratic Type were found. And the lower social class of the family, the more Wife Dominant Type were found. 2. There were significant differences according to social class in conjugla violence level: Couples of the lowest class appeared to be more verbal aggression and physical violence. 3. The most severe Husband-to-Wife verbal aggression and physical violence were appeared when the conjugal power type is either Husband Dominant Type or Wife Dominant Type.

• 대한가정학회지
• /
• 제37권9호
• /
• pp.25-38
• /
• 1999

This study investigates impacts of social class, materialism, and conspicuous consumption orientation on the burden of the marriage expense and it’s affection to marriage life. The data were gathered in seoul and suburban area, from married women in the middle class. Through the analysis of data, we identified that according to the class vaiables(income and subjectively-perceived class) and the value orientation (materialism and conspicuous consumption orientation), the burden of marriage expense and it’s affection to marriage life were different. These results assured the korean marriage culure were strongly influnced by materialism, conspicuous need, and social class.

• 한국멀티미디어학회논문지
• /
• 제9권6호
• /
• pp.693-699
• /
• 2006

Object-oriented databases (OODBs) have been adopted for managing non-standard applications such as computer-aided design (CAD), office document management and many multimedia applications. One of the major characteristics of OODBs is class hierarchy where a subclass is allowed to inherit the definitions defined on its superclasses. In this paper, I present the evaluation metrics for class hierarchy quality in OODBs. These metrics are developed to determine if a concurrency control scheme can achieve good performance or not on a given class hierarchy. I first discuss the existing concurrency control schemes for OODBs. Then I provide evaluation metrics based on structural information and access frequency information in class hierarchies. In order to discuss significance of the proposed performance metrics, an analytical model is developed. Analysis results show that the performance metrics are important factor in concurrency control performance. I consider both single inheritance and multiple inheritance. The proposed metrics can be used to provide guidelines on how to design class hierarchy of an OODB for maximizing the performance of concurrency control technique.

• 교육시설
• /
• 제2권3호
• /
• pp.31-38
• /
• 1995

The paper is to evaluate existing school building system with respect to students' comforts in the class room in Korea. This paper compared three styles of different school building system builted during last 20 years. Using statistical analysis, at first, the paper found that box-style structure is efficient for sustaining heat in the class room because it is compactly constructed. Secondly, air conditioning in the class room is important factor affected students' comforts in the summer time and for the smog occurring in the heating class room. Thirdly, we should compactly construct school building because the compactiveness of building components is important factor for student comforts. Fouthly, heating system in the class room should be changed. The system using gas or electricity insteded of coals should be introduced in the class room for the smog of the stove in winter time and for freshness in summer time.

• 대한치과교정학회지
• /
• 제50권2호
• /
• pp.98-107
• /
• 2020

Objective: The aim of this study was to compare posterior tooth inclinations, occlusal force, and contact area of adults with different sagittal malocclusions. Methods: Transverse skeletal parameters and posterior tooth inclinations were evaluated using cone beam computed tomography images, and occlusal force as well as contact area were assessed using pressure-sensitive films in 124 normodivergent adults. A linear mixed model was used to cluster posterior teeth into maxillary premolar, maxillary molar, mandibular premolar, and mandibular molar groups. Differences among Class I, II, and III groups were compared using an analysis of variance test and least significant difference post-hoc test. Correlations of posterior dental inclinations to occlusal function were analyzed using Pearson's correlation analysis. Results: In male subjects, maxillary premolars and molars had the smallest inclinations in the Class II group while maxillary molars had the greatest inclinations in the Class III group. In female subjects, maxillary molars had the smallest inclinations in the Class II group, while maxillary premolars and molars had the greatest inclinations in the Class III group. Occlusal force and contact area were not significantly different among Class I, II, and III groups. Conclusions: Premolar and molar inclinations showed compensatory inclinations to overcome anteroposterior skeletal discrepancy in the Class II and III groups; however, their occlusal force and contact area were similar to those of Class I group. In subjects with normodivergent facial patterns, although posterior tooth inclinations may vary, difference in occlusal function may be clinically insignificant in adults with Class I, II, and III malocclusions.

• 한국콘텐츠학회논문지
• /
• 제11권12호
• /
• pp.386-394
• /
• 2011

최근의 고객만족도 조사에서는 만족응답으로의 쏠림현상이 발생함으로써 만족고객의 비율이 높아져 고객만족 개선안 도출이 어려워지고 있다. 게다가 이로 인한 데이터 분석의 구조적 한계로 인해 고객만족도 조사의 실제 적용을 효과성이 감소하고 있다. 이러한 문제점을 해결하기 위해서는 만족고객을 재분류하여 보다 전략적인 의미를 도출하고 만족 고객의 불만족 요인을 찾아내기 위한 연구가 필요하다. 본 연구에서 는 Latent Class Analysis(LCA)를 이용하여 만족 고객의 세분화에 초점을 두어 수행되었다. 초고속인터넷 서비스의 만족고객만을 대상으로 LCA를 적용한 결과 3개의 집단으로 세분화된 결과를 얻었으며 각 집단별 만족요인과 불만족 요인을 분석하여 궁극적으로 고객만족경영을 달성할 수 있는 시사점을 도출하였다. 연구결과는 고객만족도 조사가 다양하고 입체적으로 분석되어 고객만족조사의 활성화는 물론, 고객 만족경영 향상을 위한 유용한 방법으로 활용되리라 기대한다.

• 한국의상디자인학회지
• /
• 제16권3호
• /
• pp.101-115
• /
• 2014

This study evaluated the effect of image type of the beauty trainer on satisfaction and stress regarding the major. The data were analyzed by spss 18.0. Frequency analysis, causal analysis, reliability analysis, T-test, one-way variance analysis, and multiple regression analysis were carried out, and the result is as following. First, as the result of analysis the image of beauty trainer, we defined inner, outer, and social image. Second, the difference between images of beauty trainers revealed that people with high interest in the major ranked the inner image of beauty trainer the highest. Respondent with the lowest and the higher class satisfaction also deemed inner image important. The same was for respondents with beauty awareness. For outer image, people with the lowest class satisfaction ranked outer image the highest. And people with beauty awareness recognized beauty trainer's outer image more important. Respondents who said the major have bleak future deemed outer image even important. While the social image was recognized the highest by respondents with lowest class satisfaction. Third, as we analyzed the correlation between the image type of beauty trainer and major stress/satisfaction, the higher the satisfaction for the trainer's outer and social image gave higher class satisfaction. And less stress about the major resulted in higher major satisfaction. Fourth, we evaluated the effect of trainer's image on the class satisfaction and stress. Fifth, the lower the awareness of inner image and the higher awareness of social image resulted in higher major stress. Lower inner image gave high major satisfaction, while high social image resulted in high major stress.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.343-356
• /
• 2022

As a part of round robin analysis to develop a finite element elastic-plastic seismic analysis procedure for nuclear safety class 1 components, a series of parametric analyses was carried out on the simulated pressurizer surge line system model to investigate sensitivity of the analysis results to finite element analysis variables. The analysis on the surge line system model considered dynamic effect due to the seismic load corresponding to PGA 0.6 g and elastic-plastic material behavior based on the Chaboche combined hardening model. From the parametric analysis results, it was found that strains such as accumulated equivalent plastic strain and equivalent plastic strain are more sensitive to the analysis variables than von Mises effect stress. The parametric analysis results also identified that finite element density and ovalization option in the elbow elements have more significant effect on the analysis results than the other variables.