• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.389-403
• /
• 2008

In Angle's Class III malocclusion, which has higher incidence in Korean than Western, depressed midfacial profile with protruded lower lips and mandible may give rise to many functional, esthetic, psychological, social problems. Due to the different malocclusion incidence according to racial differences, many previous studies focused on the relationship between Class II malocclusion and nasal airway obstruction. Previous studies used lateral cephalography which has limitations of 2 dimensional image with projection error and identification error. Therefore, the purpose of this study was to analyze morphologic differences in the nasal airway between normal occlusion and Angle's Class III malocclusion patients using 3-dimensional facial computed tomography. Thirteen normal occlusion(7 men and 6 women) and sixteen skeletal Class III(7 men and 9 women) patients were selected and 3-dimensional facial computed tomography taking was performed. Comparison between two group in volume and sectional area of nasal airway were carried out. The results were followed. 1. In the comparison of absolute nasal airway volume, oropharyngeal space of experimental group were larger than control group but there are no significant difference in other. 2. In the comparison of relative nasal airway volume, oropharyngeal space of experimental group were larger than control group but there are no significant difference in other. 3. In the oropharyngeal space width on frontal and lateral view, the similar tendency was revealed between two groups. 4. In the lateral curvature of nasal airway, the similar tendency was revealed between two groups.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.11 no.1
• /
• pp.41-56
• /
• 1984

The purpose of this study is to obtain the normal range of mandibular movement for 13 year old boys and girls, and to compare it to the range of mandibular movement of class III patient and normal adult for diagnosis and prognosis of class III malocclusion and TMJ dysfunction. The subjects were 20 normal boys 20 normal girls 22 class III boys and 18 class III girls. The author measured the ranges and shapes of movement of the mandible in the frontal, sagittal and horizontal trajectories using Saphon visitrainer C II (Tokyo Shizaisha Inc.) for the subjects. The results obtained are as follows: 1) The mean for maximum right laterotrusion in the frontal trajectory were 11.96mm in N.B., 11.10mm in N.G., 11.32mm in III. B., 11.24mm in III G. The mean for maximum left laterotrusion were 11.48mm, 11.0mm, 10.91mm, 10.44mm respectively, Area of border movement were 7.16cm in N.B., 6.59cm in N.G., 7.29cm in III. B., 7.50cm in III. G. 2) The mean for maximum protrusion in the sagittal trajectory were 11.7mm in N.B., 11.4mm in N.G.,11.87mm in III B., and 11.02mm in III. G. 3) The mean for maximum protrusion in the horizontal trajectory were 10.20mm in N.B.,10.00 mm in N.G., 9.12mm for III. B. and 9.36mm in III. G. 4) The mean for maximum protrusion of Class III subjects were shorter than those of normal subjects. 5) There was no sexual difference in the range of mandibular movement for 13 year old subjects. N.B; Normal boys N.G.; Normal girls III.B.; Class III boys III. G.; Class III girls.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.763-774
• /
• 1998

The purpose of this study was to evaluate the morphology of mandibular symphysis and location of lower incisor under the influence of the craniofacial skeleton in skeletal Class III malocclusion. The sample consisted of 132 adults who have severe Class III malocclusion(prognathism group, 33 males and 33 females), and who have normal occlusion(normal group, 33 males and 33 females). They had not received any orthodontic treatment or orthognathic surgery. The lateral cephalograms were evaluated. The results were as follows : 1. Prognathism group were larger than normal group in comparison of facial skeleton (p<0.05) with the exception of ${\angle}FH-Pal$, ${\angle}SNA$. 2. In the morphology of symphysis, measurements of anteroposterior width(LaABBW, LiABBW, SW) of prognathism group were significantly less than that of normal group(p<0.001). 3. In the correlative analysis between the craniofacial skeleton and symphysis measurements of prognathism group, vertical measurements in relation with cranial base and mandibular plane showed reverse correlationship with anteroposterior width of symphysis(LiACBW, LaACBW, LiABBW, SW)(p<0.05). But, there was not distinct difference between horizontal skeletal measurements and symphysis measurements(p>0.05). 4. The probability by regression test between vertical measurements(${\angle}SN-Mn,\;{\angle}FMA,\;{\angle}Pal-Mn,\;{\angle}LFH$) and symphysis measurements(LiACBW, LiABBW, SW, ${\angle}LISA$) were very high(p<0.001).

• The korean journal of orthodontics
• /
• v.32 no.5 s.94
• /
• pp.361-373
• /
• 2002

The purpose of this study was to evaluate the morphological changes of olveolar bone and mandibular symphysis of lower incisor by presurgical orthodontic treatment and orthognathic surgery in skeletal class III malocclusion. The sample consisted of 30 adult class III malocclusion patients who have received bilateral sagittal split mandibular osteotomy. Lateral cephalograms were taken before treatment, after presurgical orthodontic treatment and 3 months after orthognathic surgery. Skeletal and symphyseal measurements were compared and the relationships between them were analysed. The results were as follow : 1. The labial and lingual alveolar bone height in presurgical and postsurgical group were decreased than that of pretreatment group. 2. The vertical measurements of the craniofacial skeleton showed reverse correlationship with anteroposterior width of basal alveolar bone, but IMPA showed correlatiionship (p<0.01) 3. The craniofacial skeleton and the change of symphyseal measurements(symphyseal length, symphyseal width) showed no correlationship. 4. The labial alveolar bone height showed correlationship with lingual alveolar bone height(p<0.001), and negative correlationship with lingual alveolar crestal width(p<0.01). Labial and lingual alveolar crestal width has negative correlationship (p<0.05). Mandibular symphyseal length and width has positive correlationship(p<0.01). 5. IMPA, LISA showed negative correlationship with labiolingual alveolar bone height and lingual alveolar width and positive correlationship with labial alveolar base bone width.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.1
• /
• pp.101-110
• /
• 2013

$T4K^{TM}$(Myofunctional Research Co, Australia) is one of the myofunctional appliance developed to be used in children of mixed dentition. Myofuncitonal appliance stimulate the facial, masticatory and tongue muscle and help to balance the muscular force. Labial bow included in the device exerts strength in excessively labial inclineded upper jaw, Lip bumper blocks strength of the mouth to prevent abnormal strength exerted in lower jaw, Tongue tag secures proper position of tongue, and additional exercise is not required for child patients. For the more, simpler design and softer texture of device prmoted cooperation of patients during use. This case report is to present the satisfactory results gained by using $T4K^{TM}$ on Class II patients. Comment 1. $T4K^{TM}$ was applied in Class II malocclusion patients of mixed dentition with expected space insufficient to gain facial improvement. 2. Excessive overjet, overbite were improved. 3. Main effects are regarded to have been achieved by development of lingual slant of upper jaw, labial slant of lower jaw, and lower part of jawbone. 4. Bad habits, such as mouth breathing, can also be adjusted.

• The korean journal of orthodontics
• /
• v.46 no.1
• /
• pp.42-54
• /
• 2016

The aim of this clinical report is to describe the complex treatment of an adult Class III malocclusion patient who was disappointed with the outcome of a previous oral rehabilitation. Interdisciplinary treatment planning was performed with a primary indication for implant removal because of marginal bone loss and gingival recession, followed by orthodontic and surgical procedures to correct the esthetics and skeletal malocclusion. The comprehensive treatment approach included: (1) implant removal in the area of the central incisors; (2) combined orthodontic decompensation with mesial displacement and forced extrusion of the lateral incisors; (3) extraction of the lateral incisors and placement of new implants corresponding to the central incisors, which received provisional crowns; (4) orthognathic surgery for maxillary advancement to improve occlusal and facial relationships; and finally, (5) orthodontic refinement followed by definitive prosthetic rehabilitation of the maxillary central incisors and reshaping of the adjacent teeth. At the three-year follow-up, clinical and radiographic examinations showed successful replacement of the central incisors and improved skeletal and esthetic appearances. Moreover, a Class II molar relationship was obtained with an ideal overbite, overjet, and intercuspation. In conclusion, we report the successful esthetic anterior rehabilitation of a complex case in which interdisciplinary treatment planning improved facial harmony, provided gingival architecture with sufficient width and thickness, and improved smile esthetics, resulting in enhanced patient comfort and satisfaction. This clinical case report might be useful to improve facial esthetics and occlusion in patients with dentoalveolar and skeletal defects.

• The korean journal of orthodontics
• /
• v.50 no.5
• /
• pp.346-355
• /
• 2020

The treatment of skeletal Class III malocclusion in adolescents is challenging. Maxillary protraction, particularly that using bone anchorage, has been proven to be an effective method for the stimulation of maxillary growth. However, the conventional procedure, which involves the surgical implantation of mini-plates, is traumatic and associated with a high risk. Three-dimensional (3D) digital technology offers the possibility of individualized treatment. Customized mini-plates can be designed according to the shape of the maxillary surface and the positions of the roots on cone-beam computed tomography scans; this reduces both the surgical risk and patient trauma. Here we report a case involving a 12-year-old adolescent girl with skeletal Class III malocclusion and midface deficiency that was treated in two phases. In phase 1, rapid maxillary expansion and protraction were performed using 3D-printed mini-plates for anchorage. The mini-plates exhibited better adaptation to the bone contour, and titanium screw implantation was safer because of the customized design. The orthopedic force applied to each mini-plate was approximately 400-500 g, and the plates remained stable during the maxillary protraction process, which exhibited efficacious orthopedic effects and significantly improved the facial profile and esthetics. In phase 2, fixed appliances were used for alignment and leveling of the maxillary and mandibular dentitions. The complete two-phase treatment lasted for 24 months. After 48 months of retention, the treatment outcomes remained stable.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.2
• /
• pp.345-350
• /
• 2008

In children with Class III malocclusion, it is important to identify whether the etiology is functional, dental, skeletal. FR-III developed by Rolf Frankel in 1970, has been used during deciduous, mixed, and early permanent dentition to correct class III malocclusion characterized by maxillary skeletal retrusion. According Frankel, the vestibular shields and upper labial pads act to counteract the forces of the surrounding musculature that restrict forward maxillary development and cause a retrusion in maxillary tooth position. This can achieve favorable developments with the basal bone, teeth and alveolar bone. We report FR-III that can be applicated in cases of early mixed dentition with mild maxillary deficiency and deepbite before the eruption of permanent maxillary incisor.

• The korean journal of orthodontics
• /
• v.13 no.2
• /
• pp.131-146
• /
• 1983

Faces of normal occlusion, open bite and class III malocclusion were measured using cephalogram in 190 male and female subjects. Using M.K.G., types of mandibular movement, amount of horizontal and vertical movement were studied in relation to occlusal types, and were compared with each other. The following conclusions were obtained. 1. Movement of protrusion was most different in relation to occlusal type. 2. In normal occlusion, maximal protrusion were horizontal 7.66mm, vertical 3.01mm in male, 6.41, 2.92mm respectively in female and maximal inferior position were -24.32, 33.63mm in male,-23.48, 32.27mm respectively in female. 3. Angle between maximal inferior position and horizontal plane were $53.51^{\circ}$ in male, $53.84^{\circ}$ in female. 4. Generally, amount of mandibular movement was greater in male than female. 5. In open bite, path of protrusion was nearly straight without curve $69.2\%$ in male, $70.2\%$ in female. 6. In class III malocclusion, angle and amount of protrusion were smaller than normal occlusion and path was directed anterior-superiorly in $22.7\%$. 7. There was no correlation coefficient between measurement of face and mandibular movement.

• Imaging Science in Dentistry
• /
• v.47 no.1
• /
• pp.1-9
• /
• 2017

Purpose: This retrospective study aimed to evaluate the nasopharyngeal and oropharyngeal dimensions of individuals with skeletal class II, division 1 and division 2 patterns during the pre-peak, peak, and post-peak growth periods for comparison with a skeletal class I control group. Materials and Methods: Totally 124 lateral cephalograms (47 for skeletal class I; 45 for skeletal class II, division 1; and 32 for skeletal class II, division 2) in pre-peak, peak, and post-peak growth periods were selected from the department archives. Thirteen landmarks, 4 angular and 4 linear measurements, and 4 proportional calculations were obtained. The ANOVA and Duncan test were applied to compare the differences among the study groups during the growth periods. Results: Statistically significant differences were found between the skeletal class II, division 2 group and other groups for the gonion-gnathion/sella-nasion angle. The sella-nasion-B-point angle was different among the groups, while the A-point-nasion-B-point angle was significantly different for all 3 groups. The nasopharyngeal airway space showed a statistically significant difference among the groups throughout the growth periods. The interaction among the growth periods and study groups was statistically significant regarding the upper oropharyngeal airway space measurement. The lower oropharyngeal airway space measurement showed a statistically significant difference among the groups, with the smallest dimension observed in the skeletal class II, division 2 group. Conclusion: The naso-oropharyngeal airway dimensions showed a statistically significant difference among the class II, division 1; class II, division 2; and class I groups during different growth periods.